Department of Mechanical and Aerospace Engineering

Research Output 1999 2019

2019

3D printing: a critical review of current development and future prospects

Ali, M. H., Batai, S. & Sarbassov, D., Jan 1 2019, In : Rapid Prototyping Journal.

Research output: Contribution to journalReview article

Printing
3D printers
Topology
Mechanical properties
Processing

4D printing: a critical review of current developments, and future prospects

Ali, M. H., Abilgaziyev, A. & Adair, D., Jan 1 2019, (Accepted/In press) In : International Journal of Advanced Manufacturing Technology.

Research output: Contribution to journalArticle

Printing
3D printers
Topology
Mechanical properties
Processing

A comparative ANSYS-based force analysis of a new horizontal-axis semi-exposed wind turbine

Seitenov, D., Mir-Nasiri, N. & Ali, M. H., Jan 1 2019, In : Wind Engineering.

Research output: Contribution to journalArticle

Wind turbines
Turbomachine blades
Bearings (structural)
Wind power
Turbines

A conceptual model to understand the soluble and insoluble Cr species in deliquesced particles

Konakbayeva, D., Adotey, E. K., Torkmahalleh, M., Fyrillas, M., Zinetullina, A., Rule, A. M. & Hopke, P. K., Sep 15 2019, In : Air Quality, Atmosphere and Health. 12, 9, p. 1091-1102 12 p.

Research output: Contribution to journalArticle

chromium
Chromium
Carcinogens
carcinogen
Nutrients

Analysis of a novel actively controlled split path automotive gear powertrain topology

Spitas, C., Amani, A., Spitas, V. & Akiltayev, A., Jan 1 2019, In : International Journal of Powertrains. 8, 2, p. 157-174 18 p.

Research output: Contribution to journalArticle

Powertrains
Gears
Topology
Parallel flow
Real time control

A new algorithm to control dynamic stability of higher-order systems

Mir-Nasiri, N. & Ali, M. H., Apr 8 2019, Proceedings - 8th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2018. Institute of Electrical and Electronics Engineers Inc., p. 53-58 6 p. 8684988. (Proceedings - 8th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Higher Order
Dynamic Systems
Dynamical systems
Characteristic polynomial
Coefficient

A review on the conventional, non-conventional, and hybrid micromachining of glass

Jahan, M. P., Perveen, A. & Rumsey, A. M., Mar 4 2019, In : Machining Science and Technology. 23, 2, p. 264-338 75 p.

Research output: Contribution to journalReview article

Micromachining
Glass
Machining
Aerospace industry
Electronics industry

Assistive electro discharge machining of ain ceramics

Sarsen, A., Bilal, A., Ravi Sankar, M., Talamona, D. & Perveen, A., Jan 1 2019, Nano Engineering and Materials Technologies III. Umemura, K. (ed.). Trans Tech Publications, p. 109-113 5 p. (Materials Science Forum; vol. 947 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric discharge machining
machining
Silver
ceramics
coatings
1 Citation (Scopus)

Automated segmentation of optical coherence tomography images

Kharmyssov, C., Ko, W. & Kim, J. R., Jan 10 2019, In : Chinese Optics Letters. 17, 1, 011701.

Research output: Contribution to journalArticle

Optical tomography
tomography
Retinal Pigments
epithelium
Processing

Automotive powertrain reliability modelling using an idea algebra

Amrin, A., Spitas, C., Vasileiou, G. & Spitas, V., Jan 1 2019, In : International Journal of Powertrains. 8, 3, p. 191-223 33 p.

Research output: Contribution to journalArticle

Powertrains
Algebra
Topology
1 Citation (Scopus)

Composite materials property determination by Rule of Mixture and Monte Carlo Simulation

Yerbolat, G., Amangeldi, S., Ali, M. H., Badanova, N., Ashirbeok, A. & Islam, G., Jan 16 2019, Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018. Meen, T-H. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 384-387 4 p. 8615034. (Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Materials properties
3D printers
simulation
Composite materials
Printing

Computerised symbolic planetary transmission modelling for automotive design

Spitas, C., Amrin, A., Amani, A., Vasileiou, G. & Spitas, V., Jan 1 2019, In : International Journal of Powertrains. 8, 1, p. 58-73 16 p.

Research output: Contribution to journalArticle

Inverse problems
Kinematics
Systems analysis
2 Citations (Scopus)

Constraining the Asymptotically Safe cosmology: Cosmic acceleration without dark energy

Anagnostopoulos, F. K., Basilakos, S., Kofinas, G. & Zarikas, V., Feb 26 2019, In : Journal of Cosmology and Astroparticle Physics. 2019, 2, 053.

Research output: Contribution to journalArticle

dark energy
cosmology
antigravity
galaxies
probes

Development of an autonomous cupcake machine

Polichshuk, R., Khamzin, S., Mussin, K. & Ali, M. H., Feb 12 2019, 2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018. Institute of Electrical and Electronics Engineers Inc., p. 399-404 6 p. 8641035. (2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Customer Satisfaction
Microcontroller
Customer satisfaction
Production Systems
Microcontrollers
Open Access
coal gasification
Coal gasification
Fluidized beds
beds
reactors

Efficient calculation of hingeless rotor blade flap-lag-torsion dynamics for helicopters

Adair, D. & Jaeger, M., Jan 1 2019, AIAA Scitech 2019 Forum. American Institute of Aeronautics and Astronautics Inc, AIAA, (AIAA Scitech 2019 Forum).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flaps
Ordinary differential equations
Helicopters
Torsional stress
Dynamic analysis

Experimental study of zeolitic diffusion by use of a concentration-dependent surface diffusion model

Inglezakis, V. J. & Fyrillas, M. M., Jul 1 2019, In : Heliyon. 5, 7, e02143.

Research output: Contribution to journalArticle

Open Access
experimental study
diffusivity
zeolite
mass transfer
ion exchange
1 Citation (Scopus)

Free vibrations with large amplitude of axially loaded beams on an elastic foundation using the Adomian modified decomposition method

Adair, D., Ibrayev, A., Tazabekova, A. & Kim, J., Jan 1 2019, In : Shock and Vibration. 2019, 3405075.

Research output: Contribution to journalArticle

Open Access
free vibration
vibration
decomposition
Decomposition
Natural frequencies

Industry perspective of engineering competencies in different socio-economic contexts - A comparative study from Kuwait and Kazakhstan

Jaeger, M. & Adair, D., Apr 1 2019, Proceedings of 2019 IEEE Global Engineering Education Conference, EDUCON 2019. Ashmawy, A. K. & Schreiter, S. (eds.). IEEE Computer Society, p. 166-172 7 p. 8725083. (IEEE Global Engineering Education Conference, EDUCON; vol. April-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kuwait
Kazakhstan
engineering
Economics
industry

Material Optimization Method in 3D Printing

Ali, M. H., Yerbolat, G. & Amangeldi, S., Jan 16 2019, Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018. Meen, T-H. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 365-368 4 p. 8614886. (Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Printing
Materials properties
mechanical property
material
method
1 Citation (Scopus)

Mechanical property prediction method based on multi-material 3D printer

Yerbolat, G., Shynggys, A. & Ali, M. H., Feb 12 2019, 2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018. Institute of Electrical and Electronics Engineers Inc., p. 498-502 5 p. 8641073. (2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Mechanical Properties
Printing
Mechanical properties
Prediction

Modeling of material removal rate and surface roughness generated during electro-discharge machining

Razeghiyadaki, A., Molardi, C., Talamona, D. & Perveen, A., Jun 1 2019, In : Machines. 7, 2, 47.

Research output: Contribution to journalArticle

Open Access
Electric discharge machining
Surface Roughness
Evaporation
Machining
Instantaneous

Non-linear modeling of gear drive dynamics incorporating intermittent tooth contact analysis and tooth eigenvibrations

Sakaridis, E., Spitas, V. & Spitas, C., Jun 1 2019, In : Mechanism and Machine Theory. 136, p. 307-333 27 p.

Research output: Contribution to journalArticle

Gear teeth
Gears
Spur gears
Nonlinear analysis
Dynamic response
Risk assessment
Optics
Materials properties
Stiffness
Tissue

Parking gate control based on mobile application

Kasym, K., Sarsenen, A., Segizbayev, Z., Junuskaliyeva, D. & Ali, M. H., Feb 12 2019, 2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018. Institute of Electrical and Electronics Engineers Inc., p. 399-402 4 p. 8640954. (2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mobile Applications
Parking
Application programs
Bluetooth
Mobile phones
1 Citation (Scopus)

Preparation of different polymorphs of cellulose from different acid hydrolysis medium

Mahmud, M. M., Perveen, A., Jahan, R. A., Matin, M. A., Wong, S. Y., Li, X. & Arafat, M. T., Jun 1 2019, In : International Journal of Biological Macromolecules. 130, p. 969-976 8 p.

Research output: Contribution to journalArticle

Polymorphism
Cellulose
Hydrolysis
Acids
Nanoparticles
1 Citation (Scopus)

Probabilistic method for estimation of spinning reserves in multi-connected power systems with Bayesian network-based rescheduling algorithm

Bapin, Y. & Zarikas, V., Jan 1 2019, ICAART 2019 - Proceedings of the 11th International Conference on Agents and Artificial Intelligence. Steels, L., Rocha, A. & van den Herik, J. (eds.). SciTePress, p. 840-849 10 p. (ICAART 2019 - Proceedings of the 11th International Conference on Agents and Artificial Intelligence; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bayesian networks
Outages
Costs

Process teaching simulator: Trial and error, thinking, learning effectiveness

Jaeger, M. & Adair, D., Apr 1 2019, Proceedings of 2019 IEEE Global Engineering Education Conference, EDUCON 2019. Ashmawy, A. K. & Schreiter, S. (eds.). IEEE Computer Society, p. 160-165 6 p. 8725190. (IEEE Global Engineering Education Conference, EDUCON; vol. April-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Teaching
Simulators
Feedback
Students
learning

Pyrolysis characteristics of Kazakhstan coals in non-isothermal and isothermal conditions

Tokmurzin, D., Ra, H. W., Yoon, S. M., Yoon, S. J., Lee, J. G., Seo, M. W. & Adair, D., Jan 1 2019, In : International Journal of Coal Preparation and Utilization.

Research output: Contribution to journalArticle

Coal
pyrolysis
Pyrolysis
coal
Tars
1 Citation (Scopus)

Shape optimization for composite polymers in 3D printing

Ali, M. H., Yerbolat, G., Islam, G., Amangeldi, S. & Zhao, M. Y., Apr 1 2019, In : International Journal of Innovative Technology and Exploring Engineering. 8, 6, p. 55-61 7 p.

Research output: Contribution to journalArticle

Shape optimization
Printing
Composite materials
Polymers
Composite structures
Intelligent buildings
Elevators
Intelligent control
Bayesian networks
Decision making
2 Citations (Scopus)

Solar photovoltaic policy review and economic analysis for on-grid residential installations in the Philippines

Farias-Rocha, A. P., Hassan, K. M. K., Malimata, J. R. R., Sánchez-Cubedo, G. A. & Rojas-Solórzano, L. R., Jun 20 2019, In : Journal of Cleaner Production. 223, p. 45-56 12 p.

Research output: Contribution to journalArticle

Economic analysis
economic analysis
Costs
Gas emissions
Greenhouse gases

Stress analysis of self-aligning automotive gearing

Beisekenov, I., Spitas, C., Amani, A., Tsolakis, E. & Spitas, V., Jan 1 2019, In : International Journal of Powertrains. 8, 2, p. 93-114 22 p.

Research output: Contribution to journalArticle

Stress analysis
Gears
Spur gears
Gear teeth

Switching-off conventional lighting system and turning-on LED lamps in Kazakhstan: A techno-economic assessment

Islam, G., Darbayeva, E., Rymbayev, Z., Dikhanbayeva, D. & Rojas, L., Nov 1 2019, In : Sustainable Cities and Society. 51, 101790.

Research output: Contribution to journalArticle

Kazakhstan
Electric lamps
energy consumption
work environment
Light emitting diodes

Synthesis and optimization considerations for a knee orthosis based on a Watt’s six-bar linkage

Xydas, E., Abdikadirova, B. & Konstantinos, K., Jan 1 2019, Biosystems and Biorobotics. Springer International Publishing, p. 18-22 5 p. (Biosystems and Biorobotics; vol. 22).

Research output: Chapter in Book/Report/Conference proceedingChapter

Energy harvesting
Cost effectiveness
Kinematics
Trajectories
Costs

The influence of finite rupture times on flow dynamics within micro-shock tubes

Adair, D., Mukhambetiyar, A., Jaeger, M. & Malin, M., Jan 1 2019, In : International Journal of Computational Methods and Experimental Measurements. 7, 2, p. 106-117 12 p.

Research output: Contribution to journalArticle

Shock Tube
Shock tubes
Rupture
Diaphragms
Shock
3 Citations (Scopus)

Ultrasonic vibration assisted electro-discharge machining (EDM)-An overview

Sabyrov, N., Jahan, M. P., Bilal, A. & Perveen, A., Feb 10 2019, In : Materials. 12, 3, 522.

Research output: Contribution to journalReview article

Open Access
Electric discharge machining
Vibrations (mechanical)
Ultrasonics
Surface roughness
Wear of materials
2018

Analysis and design exploration of single stage compound stepped planetary gear transmissions

Spitas, C., Amani, A., Tsolakis, E. & Spitas, V., Jan 1 2018, In : International Journal of Powertrains. 7, 1-3, p. 1-14 14 p.

Research output: Contribution to journalArticle

Gears
Topology
Kinematics
1 Citation (Scopus)

An Experimental Framework for Validation of Thermal Modeling for Breast Cancer Detection

Igali, D., Mukhmetov, O., Zhao, Y., Fok, S. C. & Teh, S. L., Oct 1 2018, In : IOP Conference Series: Materials Science and Engineering. 408, 1, 012031.

Research output: Contribution to journalConference article

Finite element method
Mammography
Infrared imaging
Tumors
Heat transfer
5 Citations (Scopus)

A power series solution for rotating nonuniform Euler–Bernoulli cantilever beams

Adair, D. & Jaeger, M., Sep 1 2018, In : JVC/Journal of Vibration and Control. 24, 17, p. 3855-3864 10 p.

Research output: Contribution to journalArticle

Cantilever beams
Differential equations
Dynamic response
Cones
Machining
Design of experiments
Mathematical models
Carbide tools
Capacitance

Applications of laser welding in dentistry: A state-of-the-art review

Perveen, A., Molardi, C. & Fornaini, C., May 1 2018, In : Micromachines. 9, 5, 209.

Research output: Contribution to journalReview article

Dentistry
Laser beam welding
Lasers
Welding
Dental alloys
1 Citation (Scopus)

Aqueous chemistry of airborne hexavalent chromium during sampling

Torkmahalleh, M., Karibayev, M., Konakbayeva, D., Fyrillas, M. & Rule, A. M., Nov 1 2018, In : Air Quality, Atmosphere and Health. 11, 9, p. 1059-1068 10 p.

Research output: Contribution to journalArticle

chromium
Chromium
Cellulose
Sampling
filter

Challenges for flood risk management in flood-prone Sirajganj region of Bangladesh

Ali, M. H., Bhattacharya, B., Islam, A. K. M. S., Islam, G. M. T., Hossain, M. S. & Khan, A. S., Jan 1 2018, (Accepted/In press) In : Journal of Flood Risk Management.

Research output: Contribution to journalArticle

Risk management
risk management
Bangladesh
natural disaster
damages

Comparative micro-EDM studies on Ni based X-alloy using coated and uncoated tools

Perveen, A. & Jahan, M. P., Jan 1 2018, Manufacturing Sciences and Technologies VIII - 8th ICMST 2017. Debnath, S. (ed.). Trans Tech Publications, p. 13-19 7 p. (Materials Science Forum; vol. 911 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

machining
Machining
craters
energy
aerospace industry
2 Citations (Scopus)

Critical Depth of Buried Isothermal Circular Pipes

Fyrillas, M., Jan 2 2018, In : Heat Transfer Engineering. 39, 1, p. 51-57 7 p.

Research output: Contribution to journalArticle

Pipe
Biot number
Heat transfer
heat transfer
Heat conduction

Development of a network-based autonomous firefighting robot

Ali, M. H., Shamishev, S. & Aitmaganbayev, A., Jan 1 2018, ICINCO 2018 - Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics. Gusikhin, O. & Madani, K. (eds.). SciTePress, p. 525-533 9 p. (ICINCO 2018 - Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fire extinguishers
Machine design
Fires
Robotics
Robots

Development of a robot for boiler tube inspection

Ali, M. H., Zharakhmet, T., Atykhan, M., Yerbolat, A. & Batai, S., Jan 1 2018, ICINCO 2018 - Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics. Gusikhin, O. & Madani, K. (eds.). SciTePress, p. 534-541 8 p. (ICINCO 2018 - Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrasonic applications
DC motors
Petroleum industry
Boilers
Robotics

Effective envelope insulation and heating strategies in apartment buildings in mid-temperate regions: A case study of Nova Scotia, Canada

Jamili, H., Krishana, D., Rubio, J., Tristan, G. & Rojas Solorzano, L., Jul 31 2018, The Role of Exergy in Energy and the Environment. Nizetic, S. & Papadopoulos, A. (eds.). 1 ed. Springer International Publishing, Vol. 1. p. 749 756 p. (Green Energy and Technology).

Research output: Chapter in Book/Report/Conference proceedingChapter (peer-reviewed)

Insulation
Heat resistance
Heating
Energy efficiency
Costs

Effectiveness and prospects of implementing a solar water heating system in Astana, Kazakhstan

Absemetov, A., Mukushev, M., Yerubayev, A., Zhumanalina, Z. & Rojas Solorzano, L., Jan 1 2018, Green Energy and Technology. Springer Verlag, p. 603-615 13 p. (Green Energy and Technology; vol. Part F6).

Research output: Chapter in Book/Report/Conference proceedingChapter

heating
Heating
Water
Electric heating
water