Department of Mechanical and Aerospace Engineering

Research Output 1999 2019

1999

Run life enlargement methodology for ball-and-seat check valves used in artificial lift pumping units

Zarea, S., Kabboul, F. & Rojas-Solorzano, L., 1999, SPE Latin American and Caribbean Petroleum Engineering Conference Proceedings. (SPE Latin American and Caribbean Petroleum Engineering Conference Proceedings; vol. 1999-Janua).

Research output: Chapter in Book/Report/Conference proceedingChapter

Seats
Pressure drop
Leakage (fluid)
Test facilities
Application programming interfaces (API)
2000

Design of a large scale flow-meter test and calibration facility

Corrales-Barallobre, C., Martínez-Huen, R., Alvarez, L., Polanco, G. & Rojas-Solórzano, L., 2000. 5 p.

Research output: Contribution to conferencePaper

flowmeters
test facilities
calibrating
flow velocity
methodology

Design of the distribution manifold for a large-scale flowmeter calibration facility

Corrales-Barallobre, C., Martínez-Huen, R., Alvarez, L., Polanco, G. & Rojas-Solórzano, L., 2000. 5 p.

Research output: Contribution to conferencePaper

Flowmeters
Calibration
Flow simulation
Air
Computer simulation

Study of the transient temperature profiles induced by changes of the welding parameters during aluminum two plate arc butt-welding

Viggiani, P., Urthaler, Y., Payares, C. & Rojas-Solórzano, L., 2000. 8 p.

Research output: Contribution to conferencePaper

Butt welding
Electric arc welding
Welding
Aluminum
Temperature
2002
87 Citations (Scopus)

An intelligent knowledge-based system for product cost modelling

Shehab, E. & Abdalla, H., 2002, International Journal of Advanced Manufacturing Technology. p. 49-65 17 p. (International Journal of Advanced Manufacturing Technology; vol. 19).

Research output: Chapter in Book/Report/Conference proceedingChapter

Knowledge based systems
Costs
Knowledge representation
Product development
Machining
2004

3-D CFD modeling-investigation of potential vortex formation at the intakes of Caruachi Powerhouse

Marcano, A., Rojas-Solorzano, L., Reyes, M. & Marin, J., 2004, HYDRAULICS OF DAMS AND RIVER STRUCTURES. p. 61-68 8 p. (HYDRAULICS OF DAMS AND RIVER STRUCTURES).

Research output: Chapter in Book/Report/Conference proceedingChapter

cofferdam
vortex
modeling
entrainment
turbine
2005
3 Citations (Scopus)

Lean manufacturing for SMEs: Enabling rapid response to demand changes

Achanga, P., Shehab, E., Roy, R. & Nelder, G., Dec 1 2005, Proceedings ICED 05, the 15th International Conference on Engineering Design. Vol. DS 35.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lean production
1 Citation (Scopus)

Transient two-phase-flow model for predicting column formation in intermittent gas lift systems

Sandoval, S., Rojas Solorzano, L. & Gasbarri, S., Jan 1 2005, Society of Petroleum Engineers - SPE Latin American and Caribbean Petroleum Engineering Conference 2005, LACPEC 2005. Society of Petroleum Engineers (SPE), Vol. 2005-June.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gas lifts
Two phase flow
Fluids
Multiphase flow
Distillation columns
2006
5 Citations (Scopus)

Modelling the cost of railway asset renewal projects using pairwise comparisons

Ling, D. J., Roy, R., Shehab, E., Jaiswal, J. & Stretch, I., 2006, In : Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. 220, 4, p. 331-346 16 p.

Research output: Contribution to journalArticle

Costs
Cost estimating
Life cycle
Switches
2007
1034 Citations (Scopus)

State-of-the-art in product-service systems

Baines, T. S., Lightfoot, H. W., Evans, S., Neely, A., Greenough, R., Peppard, J., Roy, R., Shehab, E., Braganza, A., Tiwari, A., Alcock, J. R., Angus, J. P., Basti, M., Cousens, A., Irving, P., Johnson, M., Kingston, J., Lockett, H., Martinez, V., Michele, P. & 3 others, Tranfield, D., Walton, I. M. & Wilson, H., 2007, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. p. 1543-1552 10 p. (Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture; vol. 221).

Research output: Chapter in Book/Report/Conference proceedingChapter

Outcome Assessment (Health Care)
Research
26 Citations (Scopus)

Thermal management of mobile phone using phase change material

Tan, F. L. & Fok, S. C., 2007, 9th Electronics Packaging Technology Conference, EPTC 2007. IEEE, p. 836-842 7 p. 4469773. (2007 9th Electronics Packaging Technology Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Phase change materials
Mobile phones
Temperature control
Heat storage
Latent heat
2008
10 Citations (Scopus)

Evidence for HLA class II susceptible and protective haplotypes for osteomyelitis in pediatric patients with sickle cell anemia

Al-Ola, K., Mahdi, N., Al-Subaie, AM., Ali, ME., Al-Absi, IK. & Almawi, WY., 2008, In : Tissue Antigens. 71, 5, p. 453-457 5 p.

Research output: Contribution to journalArticle

Modelado de turbulencia en la estimación numérica de hemólisis en cánulas de diálisis

Salazar, F. A., Rojas-Solórzano, L. R. & Blanco, A. J., 2008, In : Revista de la Facultad de Ingenieria. 23, 4, p. 93-98 6 p.

Research output: Contribution to journalArticle

Computational fluid dynamics
Blood
turbulence
Turbulence models
blood

Turbulence modeling in the numerical estimation of hemolysis in hemodialysis cannulae

Salazar, F. A., Rojas-Solórzano, L. R. & Blanco, A. J., Dec 1 2008, In : Revista de la Facultad de Ingenieria. 23, 4, p. 81-92

Research output: Contribution to journalArticle

Computational fluid dynamics
Turbulence
Blood
turbulence
Turbulence models
2009

A Methodology for Variability Reduction in Manufacturing Cost Estimating in the Automotive Industry based on Design Features

Rojo, F. J. R., Roy, R. & Shehab, E., 2009, Structure. p. 197-201 5 p. (Structure).

Research output: Chapter in Book/Report/Conference proceedingChapter

Cost estimating
Cost estimates
Automotive industry
Methodology
Manufacturing cost

Data Uncertainty Assessment and Information Flow Analysis for Product-Service Systems in a Library Case Study

Durugbo, C., Tiwari, A., Roy, R., Erkoyuncu, J. A., Alcock, J. R. & Shehab, E., 2009, In : Journal of Cleaner Production. p. Submitted

Research output: Contribution to journalArticle

Engines
methodology
library
analysis
product

Developing a current capability design for manufacture framework in the aerospace industry

Whiteside, A., Shehab, E., Beadle, C. & Percival, M., 2009, 19th CIRP Design Conference. p. 223-228 6 p. (19th CIRP Design Conference).

Research output: Chapter in Book/Report/Conference proceedingChapter

Aerospace industry
Product design
Product development
Communication
6 Citations (Scopus)

HLA DRB1* 130101-DQB1* 060101 haplotype is associated with acute chest syndrome in sickle cell anemia patients

Mahdi, N., Al-Subaie, AM., Al-Ola, K., Al-Irhayim, AQ., Ali, ME., Al-Irhayim, Z. & Almawi, WY., 2009, In : Tissue Antigens. 73, 3, p. 245-249 5 p.

Research output: Contribution to journalArticle

956 Citations (Scopus)

Technical product-service systems: Some implications for the machine tool industry

Azarenko, A., Roy, R., Shehab, E. & Tiwari, A., 2009, Journal of Manufacturing Technology Management. p. 700-722 23 p. (Journal of Manufacturing Technology Management; vol. 20).

Research output: Chapter in Book/Report/Conference proceedingChapter

Industry
Technology
Costs and Cost Analysis
Manufacturing Industry
2010
81 Citations (Scopus)

Challenges in enterprise resource planning implementation: State-of-the-art

Momoh, A., Roy, R. & Shehab, E., Jul 27 2010, Business Process Management Journal. p. 537-565 29 p. (Business Process Management Journal; vol. 16).

Research output: Chapter in Book/Report/Conference proceedingChapter

Search Engine
Research
Industry
Organizations
Databases
7 Citations (Scopus)

Enhancing digital design data availability in the aerospace industry

Shehab, E., Bouin-Portet, M., Hole, R. & Fowler, C., 2010, CIRP Journal of Manufacturing Science and Technology. p. 240-246 7 p. (CIRP Journal of Manufacturing Science and Technology; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingChapter

Aerospace industry
Availability
Aerospace engineering
Coloring
Product design

Exposure to different commercial oils

Torkmahalleh, M., Goldasteh, I., Zhao, Y., Rossner, A., Hopke, P. K. & Ferro, A. R., 2010, AAAR 29th Annual Conference. Portland, OR, USA

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Impact of uncertainty on industrial product-service system delivery

Erkoyuncu, J. A., Roy, R., Shehab, E., Cheruvu, K. & Gath, A., 2010, In : CIRP IPS2 Conference. p. 481-487 7 p.

Research output: Contribution to journalArticle

Uncertainty
Product-service systems
Key words
Costs
Schedule
1 Citation (Scopus)

Key Challenges in Managing Software Obsolescence for Industrial Product-Service Systems (IPS2)

Rojo, F., Roy, R., Shehab, E. & Cheruvu, K., 2010, In : CIRP IPS2 Conference. p. 393-398 6 p.

Research output: Contribution to journalArticle

Software
Industry
Contracts
Life Cycle Stages
Interviews

Product-service systems across industry sectors: future research needs and challenges

Durugbo, C., Bankole, OO., Erkoyuncu, JA., Tiwari, A., Alcock, J. R., Roy, R. & Shehab, E., 2010. 8 p.

Research output: Contribution to conferencePaper

Industry
Systems analysis

Toward Full Public E-Service Environment in Developing Countries

Hassan, HS., Shehab, E. & Peppard, J., 2010, In : World Academy of Science, Engineering and Technology. 4, 6, p. 618-622 5 p.

Research output: Contribution to journalArticle

Developing countries
2011

A Framework for E-Service Implementation in the Developing Countries

Hassan, H. S., Shehab, E. & Peppard, J., Jan 2011, International Journal of Customer Relationship Marketing and Management. p. 55-68 14 p. (International Journal of Customer Relationship Marketing and Management; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingChapter

Developing countries
E-services
Government
Service development
Lessons learned
30 Citations (Scopus)

Detailed cost estimating in the automotive industry: Data and information requirements

Roy, R., Souchoroukov, P. & Shehab, E., 2011, Intern. Journal of Production Economics. p. 694-707 14 p. (Intern. Journal of Production Economics; vol. 133).

Research output: Chapter in Book/Report/Conference proceedingChapter

Cost estimating
Automotive industry
Industry data
Information requirements
Cost estimates

Estudio numérico de la receptividad en la capa límite de rejillas de álabes utilizando criterios de vorticidad

Polanco, G., Rojas Solórzano, L. & Amon, C., Sep 2011, In : Revista de la Facultad de Ingenieria. 26, 3, p. 111-125 15 p.

Research output: Contribution to journalArticle

Vorticity
vorticity
Boundary layers
boundary layer
Direct numerical simulation

Integrated new product introduction challenges in aerospace manufacturing engineering

Maginness, M., Shehab, E. & Beadle, C., 2011, Global Product Development - Proceedings of the 20th CIRP Design Conference. Springer Berlin, p. 247-252 6 p. (Global Product Development - Proceedings of the 20th CIRP Design Conference).

Research output: Chapter in Book/Report/Conference proceedingChapter

Manufacturing
Aerospace
New product introduction
Integrated
Manufacturing process

Modeling the structure functions in linearly forced isotropic turbulence

Akylas, E., Gravanis, E., Fyrillas, M., Rouson, D. I. & Kassinos, S. C., Jan 1 2011.

Research output: Contribution to conferencePaper

Turbulence
Physics
Statistics
Viscosity
Cascades (fluid mechanics)
Vorticity
Airfoils
vorticity
Boundary layers

Recent advances in e-service in the public sector: State-of-the-art and future trends

Hassan, H. S., Shehab, E. & Peppard, J., Jun 2011, Business Process Management Journal. p. 526-545 20 p. (Business Process Management Journal; vol. 17).

Research output: Chapter in Book/Report/Conference proceedingChapter

Public Sector
Research
Publications
Research Personnel

Semantic knowledge based approach for product maintenance support

Sanya, I., Shehab, E., Roy, R., Houseman, O. & Jonik, M., 2011, Global Product Development - Proceedings of the 20th CIRP Design Conference. Springer Berlin, p. 73-80 8 p. (Global Product Development - Proceedings of the 20th CIRP Design Conference).

Research output: Chapter in Book/Report/Conference proceedingChapter

Knowledge-based
Semantic technologies
Expertise
Qualitative research
Intellectual capital
1 Citation (Scopus)

Towards a cost modelling framework for outsourcing ERP systems

Shehab, E., Thomassin, M. & Badawy, M., 2011, Advanced Concurrent Engineering. p. 401-408 8 p. (Advanced Concurrent Engineering).

Research output: Chapter in Book/Report/Conference proceedingChapter

Enterprise resource planning
Outsourcing
Costs
Industry
Economics

Verification and validation of computational fluid dynamics simulations of compound channel flow

Filonovich, M. S., Azevedo, R., Rojas, L. & Leal, J. B., Jan 1 2011, 34th IAHR Congress 2011 - Balance and Uncertainty: Water in a Changing World, Incorporating the 33rd Hydrology and Water Resources Symposium and the 10th Conference on Hydraulics in Water Engineering. International Association for Hydro-Environment Engineering and Research (IAHR), p. 4430-4437 8 p. (34th IAHR Congress 2011 - Balance and Uncertainty: Water in a Changing World, Incorporating the 33rd Hydrology and Water Resources Symposium and the 10th Conference on Hydraulics in Water Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

channel flow
Channel flow
computational fluid dynamics
Computational fluid dynamics
Computer simulation
2012
15 Citations (Scopus)

A cost estimating framework for electronic, electrical and electromechanical (EEE) components obsolescence within the use-oriented product-service systems contracts

Romero Rojo, F. J., Roy, R., Shehab, E., Cheruvu, K. & Mason, P., Jan 2012, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. p. 154-166 13 p. (Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture; vol. 226).

Research output: Chapter in Book/Report/Conference proceedingChapter

Cost estimating
Product-service systems
Obsolescence
Costs
Life cycle
4 Citations (Scopus)

A study on obsolescence resolution profiles

Romero Rojo, F. J., Roy, R., Shehab, E. & Cheruvu, K., Jan 2012, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. p. 167-177 11 p. (Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture; vol. 226).

Research output: Chapter in Book/Report/Conference proceedingChapter

railway
industry
defence
method
trend

Biogas home-production assessment using a selective sample of organic vegetable waste. A preliminary study

Durán-García, M., Ramírez, Y., Bravo, R. & Rojas-Solorzano, L., Feb 2012, Interciencia. p. 128-132 5 p. (Interciencia; vol. 37).

Research output: Chapter in Book/Report/Conference proceedingChapter

biogas
substrate
catalyst
energy use
potato
41 Citations (Scopus)

Cost engineering for manufacturing: Current and future research

Xu, Y., Elgh, F., Erkoyuncu, J. A., Bankole, O., Goh, Y., Cheung, W. M., Baguley, P., Wang, Q., Arundachawat, P., Shehab, E., Newnes, L. & Roy, R., Apr 1 2012, International Journal of Computer Integrated Manufacturing. p. 300-314 15 p. (International Journal of Computer Integrated Manufacturing; vol. 25).

Research output: Chapter in Book/Report/Conference proceedingChapter

Cost engineering
Costs
Engineering research
Operating costs
Life cycle

Experimental Charecterization of Straight Compound-Chaneel Turbulent Field

Peter, R. (ed.), Grünzner, M. (ed.), Stephan, H. (ed.), Azevedo, R., Rojas-Solórzano, L. & Leal, J. L., 2012. 6 p.

Research output: Contribution to conferencePaper

dissipation
turbulence
open channel flow
laser doppler velocimeters
channel flow

Influence of vegetation on compound-channel turbulent field

Azevedo, R., Leal, J. B. & Rojas-Solórzano, L., 2012, River Flow 2012 - Proceedings of the International Conference on Fluvial Hydraulics. p. 209-216 8 p. (River Flow 2012 - Proceedings of the International Conference on Fluvial Hydraulics; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingChapter

floodplain
vegetation
momentum transfer
river
vortex
9 Citations (Scopus)

Knowledge visualization in product development using trade-off curves

Maksimovic, M., Al-Ashaab, A., Sulowski, R. & Shehab, E., 2012, IEEE International Conference on Industrial Engineering and Engineering Management. IEEE Computer Society, p. 708-711 4 p. (IEEE International Conference on Industrial Engineering and Engineering Management).

Research output: Chapter in Book/Report/Conference proceedingChapter

Product development
Visualization
Concurrent engineering
Knowledge representation
Life cycle

Physical Characteristics of Particle Emission from Multiple Cooking Activities

Zhao, Y., Torkmahalleh, M., Goldasteh, I., Rossner, A., Hopke, P. K. & Ferro, A. R., 2012, AAAR 31st Annual Conference. Minneapolis, Minnesota, USA

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2013
18 Citations (Scopus)

A3 thinking approach to support knowledge-driven design

Mohd Saad, N., Al-Ashaab, A., Maksimovic, M., Zhu, L., Shehab, E., Ewers, P. & Kassam, A., 2013, In : International Journal of Advanced Manufacturing Technology. p. 1371-1386 16 p.

Research output: Contribution to journalArticle

Electromagnetic compatibility
Product design
Product development
Life cycle
Productivity

Design of loboid gear pairs using involute discretization

Spitas, V. & Spitas, C., Jan 1 2013, Power Transmissions - Proceedings of the 4th International Conference. Dobre, G. (ed.). Springer Netherlands, p. 417-425 9 p. (Mechanisms and Machine Science; vol. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Gear teeth
Rotary pumps
Blowers
Pneumatics
1 Citation (Scopus)

Dynamical simulation and calculation of the load factor of spur gears with indexing errors and profile modifications for optimal gear design

Spitas, C., Spitas, V. & Rajabalinejad, M., Jan 1 2013, Power Transmissions - Proceedings of the 4th International Conference. Dobre, G. (ed.). Springer Netherlands, p. 183-196 14 p. (Mechanisms and Machine Science; vol. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Spur gears
Gears
Gear teeth
Geometry

Emission fluxes of different metals in aerosol emitted during frying-effect of frying pan

Torkmahalleh, M., Zhao, Y., Goldasteh, I., Rossner, A., Hopke, P. K. & Ferro, A. R., 2013, Conference Environment and Health – Bridging South, North, East and West. Basel, Switzerland

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Enhancement of product information collaboration and access in the aerospace industry

Shehab, E., Fowler, C., Rodriguez Gil, A., Abdalla, H., Darwish, M., Abdulhafed, H., Ahmed, A., Ahouie, H., Alechnovic, A., Paumes, C., Tacchini, E., Urbane, I. & Richardson, M., Jun 1 2013, International Journal of Production Research. p. 3225-3240 16 p. (International Journal of Production Research; vol. 51).

Research output: Chapter in Book/Report/Conference proceedingChapter

Aerospace industry
Cost reduction
Product development
Information management
Costs