Department of Mechanical and Aerospace Engineering

Research Output 1999 2019

2D Static droplet simulation with Shan-Chen multiphase Lattice Boltzmann Model

Rojas Solorzano, L., Dauyeshova, B. & Monaco, E., Nov 15 2016.

Research output: Contribution to conferencePaper

Open Access
multiphase flow
liquids
gas density
simulation
static tests

3-D CFD modeling-investigation of potential vortex formation at the intakes of Caruachi Powerhouse

Marcano, A., Rojas-Solorzano, L., Reyes, M. & Marin, J., 2004, HYDRAULICS OF DAMS AND RIVER STRUCTURES. p. 61-68 8 p. (HYDRAULICS OF DAMS AND RIVER STRUCTURES).

Research output: Chapter in Book/Report/Conference proceedingChapter

cofferdam
vortex
modeling
entrainment
turbine
1 Citation (Scopus)

3D printing: a critical review of current development and future prospects

Ali, M. H., Batai, S. & Sarbassov, D., Jan 1 2019, In : Rapid Prototyping Journal.

Research output: Contribution to journalReview article

Printing
3D printers
Topology
Mechanical properties
Processing

4D printing: a critical review of current developments, and future prospects

Ali, M. H., Abilgaziyev, A. & Adair, D., Jan 1 2019, (Accepted/In press) In : International Journal of Advanced Manufacturing Technology.

Research output: Contribution to journalArticle

Printing
3D printers
Topology
Mechanical properties
Processing
18 Citations (Scopus)

A3 thinking approach to support knowledge-driven design

Mohd Saad, N., Al-Ashaab, A., Maksimovic, M., Zhu, L., Shehab, E., Ewers, P. & Kassam, A., 2013, In : International Journal of Advanced Manufacturing Technology. p. 1371-1386 16 p.

Research output: Contribution to journalArticle

Electromagnetic compatibility
Product design
Product development
Life cycle
Productivity

A comparative ANSYS-based force analysis of a new horizontal-axis semi-exposed wind turbine

Seitenov, D., Mir-Nasiri, N. & Ali, M. H., Jan 1 2019, In : Wind Engineering.

Research output: Contribution to journalArticle

Wind turbines
Turbomachine blades
Bearings (structural)
Wind power
Turbines
10 Citations (Scopus)

A conceptual model for evaluating product-service systems leanness in UK manufacturing companies

Elnadi, M. & Shehab, E., 2014, Procedia CIRP. Elsevier B.V., p. 281-286 6 p. (Procedia CIRP; vol. 22).

Research output: Chapter in Book/Report/Conference proceedingChapter

Conceptual model
Product-service systems
Manufacturing companies
Excellence
Workforce

A conceptual model to understand the soluble and insoluble Cr species in deliquesced particles

Konakbayeva, D., Adotey, E. K., Torkmahalleh, M., Fyrillas, M., Zinetullina, A., Rule, A. M. & Hopke, P. K., Sep 15 2019, In : Air Quality, Atmosphere and Health. 12, 9, p. 1091-1102 12 p.

Research output: Contribution to journalArticle

chromium
Chromium
Carcinogens
carcinogen
Nutrients
15 Citations (Scopus)

A cost estimating framework for electronic, electrical and electromechanical (EEE) components obsolescence within the use-oriented product-service systems contracts

Romero Rojo, F. J., Roy, R., Shehab, E., Cheruvu, K. & Mason, P., Jan 2012, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. p. 154-166 13 p. (Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture; vol. 226).

Research output: Chapter in Book/Report/Conference proceedingChapter

Cost estimating
Product-service systems
Obsolescence
Costs
Life cycle

A Framework for E-Service Implementation in the Developing Countries

Hassan, H. S., Shehab, E. & Peppard, J., Jan 2011, International Journal of Customer Relationship Marketing and Management. p. 55-68 14 p. (International Journal of Customer Relationship Marketing and Management; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingChapter

Developing countries
E-services
Government
Service development
Lessons learned

Aggregating student peer assessment during capstone projects

Adair, D. & Jaeger, M., 2017, In : International Journal of Engineering Education. 33, 1, p. 216-224 9 p.

Research output: Contribution to journalArticle

Students
student
evidence
Fusion reactions
Agglomeration
3 Citations (Scopus)

Aircraft tire temperature at touchdown with wheel prerotation

Alroqi, A. A., Wang, W. & Zhao, Y., Jan 1 2017, In : Journal of Aircraft. 54, 3, p. 926-938 13 p.

Research output: Contribution to journalArticle

Tires
Wheels
Aircraft
Temperature
Skidding

A Methodology for Variability Reduction in Manufacturing Cost Estimating in the Automotive Industry based on Design Features

Rojo, F. J. R., Roy, R. & Shehab, E., 2009, Structure. p. 197-201 5 p. (Structure).

Research output: Chapter in Book/Report/Conference proceedingChapter

Cost estimating
Cost estimates
Automotive industry
Methodology
Manufacturing cost
4 Citations (Scopus)

An aerospace requirements setting model to improve system design

Centrich, X. T., Shehab, E., Sydor, P., Mackley, T., John, P. & Harrison, A., 2014. 6 p.

Research output: Contribution to conferencePaper

Systems analysis
Industry
Engines
Weibull distribution
Distribution functions

Analysis and design exploration of single stage compound stepped planetary gear transmissions

Spitas, C., Amani, A., Tsolakis, E. & Spitas, V., Jan 1 2018, In : International Journal of Powertrains. 7, 1-3, p. 1-14 14 p.

Research output: Contribution to journalArticle

Gears
Topology
Kinematics

Analysis of a novel actively controlled split path automotive gear powertrain topology

Spitas, C., Amani, A., Spitas, V. & Akiltayev, A., Jan 1 2019, In : International Journal of Powertrains. 8, 2, p. 157-174 18 p.

Research output: Contribution to journalArticle

Powertrains
Gears
Topology
Parallel flow
Real time control
1 Citation (Scopus)

Analysis of decision alternatives of the deep borehole filter restoration problem

Abdildin, Y. G. & Abbas, A. E., Nov 1 2016, In : Energy. 114, p. 1306-1321 16 p.

Research output: Contribution to journalArticle

Boreholes
Uranium
Restoration
Uranium mines
Nuclear energy

A new algorithm to control dynamic stability of higher-order systems

Mir-Nasiri, N. & Ali, M. H., Apr 8 2019, Proceedings - 8th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2018. Institute of Electrical and Electronics Engineers Inc., p. 53-58 6 p. 8684988. (Proceedings - 8th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Higher Order
Dynamic Systems
Dynamical systems
Characteristic polynomial
Coefficient
2 Citations (Scopus)

An Experimental Framework for Validation of Thermal Modeling for Breast Cancer Detection

Igali, D., Mukhmetov, O., Zhao, Y., Fok, S. C. & Teh, S. L., Oct 1 2018, In : IOP Conference Series: Materials Science and Engineering. 408, 1, 012031.

Research output: Contribution to journalConference article

Finite element method
Mammography
Infrared imaging
Tumors
Heat transfer
1 Citation (Scopus)

An Integrated Aerospace Requirement Setting and Risk Analysis Tool for Life Cycle Cost Reduction and System Design Improvement

Estébanez, L. R., Shehab, E., Sydor, P., Mackley, T., John, P. & Harrison, A., 2015, Procedia CIRP. Elsevier B.V., p. 78-83 6 p. (Procedia CIRP; vol. 38).

Research output: Chapter in Book/Report/Conference proceedingChapter

Risk analysis
Cost reduction
Life cycle
Systems analysis
Aircraft engines
87 Citations (Scopus)

An intelligent knowledge-based system for product cost modelling

Shehab, E. & Abdalla, H., 2002, International Journal of Advanced Manufacturing Technology. p. 49-65 17 p. (International Journal of Advanced Manufacturing Technology; vol. 19).

Research output: Chapter in Book/Report/Conference proceedingChapter

Knowledge based systems
Costs
Knowledge representation
Product development
Machining
5 Citations (Scopus)

A power series solution for rotating nonuniform Euler–Bernoulli cantilever beams

Adair, D. & Jaeger, M., Sep 1 2018, In : JVC/Journal of Vibration and Control. 24, 17, p. 3855-3864 10 p.

Research output: Contribution to journalArticle

Cantilever beams
Differential equations
Dynamic response
Cones
Machining
Design of experiments
Mathematical models
Carbide tools
Capacitance

Application of CFD modelling to air quality in Kuwait City

Zhunussova, M., Jaeger, M. & Adair, D., Apr 1 2017, In : Environmental Fluid Mechanics. 17, 2, p. 395-413 19 p.

Research output: Contribution to journalArticle

computational fluid dynamics
Air quality
air quality
Computational fluid dynamics
modeling

Application of the Adomian modified decomposition method for a beam with a single section discontinuity resting on an elastic foundation

Adair, D., Ibrayev, A., Kim, J. R. & Jaeger, M., Jan 1 2019, Proceedings of the 26th International Congress on Sound and Vibration, ICSV 2019. Canadian Acoustical Association, (Proceedings of the 26th International Congress on Sound and Vibration, ICSV 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

discontinuity
decomposition
Euler-Bernoulli beams
modal response
free vibration
1 Citation (Scopus)

Applications of laser welding in dentistry: A state-of-the-art review

Perveen, A., Molardi, C. & Fornaini, C., May 1 2018, In : Micromachines. 9, 5, 209.

Research output: Contribution to journalReview article

Dentistry
Laser beam welding
Lasers
Welding
Dental alloys
1 Citation (Scopus)

Aqueous chemistry of airborne hexavalent chromium during sampling

Torkmahalleh, M., Karibayev, M., Konakbayeva, D., Fyrillas, M. & Rule, A. M., Nov 1 2018, In : Air Quality, Atmosphere and Health. 11, 9, p. 1059-1068 10 p.

Research output: Contribution to journalArticle

chromium
Chromium
Cellulose
Sampling
filter
3 Citations (Scopus)

A review of digital wayfinding technologies in the transportation industry

Peña Miñano, S., Kirkwood, L., Court, S., Farnsworth, M., Orlovs, I., Shehab, E. & Tinworth, N., 2017, Advances in Transdisciplinary Engineering. IOS Press BV, p. 207-212 6 p. (Advances in Transdisciplinary Engineering; vol. 6).

Research output: Chapter in Book/Report/Conference proceedingChapter

Information systems
Industry
Augmented reality
Mobile devices
Rails
3 Citations (Scopus)

A review of technical challenges of laser drilling manufacturing process

Sarfraz, S., Shehab, E. & Salonitis, K., 2017, Advances in Transdisciplinary Engineering. (Advances in Transdisciplinary Engineering; vol. 6).

Research output: Chapter in Book/Report/Conference proceedingChapter

Methicillin-Resistant Staphylococcus aureus
Lasers
Chromosomes
Multilocus Sequence Typing
Nucleic Acid Repetitive Sequences
1 Citation (Scopus)

A review on the conventional, non-conventional, and hybrid micromachining of glass

Jahan, M. P., Perveen, A. & Rumsey, A. M., Mar 4 2019, In : Machining Science and Technology. 23, 2, p. 264-338 75 p.

Research output: Contribution to journalReview article

Micromachining
Glass
Machining
Aerospace industry
Electronics industry

Assistive electro discharge machining of ain ceramics

Sarsen, A., Bilal, A., Ravi Sankar, M., Talamona, D. & Perveen, A., Jan 1 2019, Nano Engineering and Materials Technologies III. Umemura, K. (ed.). Trans Tech Publications, p. 109-113 5 p. (Materials Science Forum; vol. 947 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric discharge machining
machining
Silver
ceramics
coatings
4 Citations (Scopus)

A study on obsolescence resolution profiles

Romero Rojo, F. J., Roy, R., Shehab, E. & Cheruvu, K., Jan 2012, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. p. 167-177 11 p. (Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture; vol. 226).

Research output: Chapter in Book/Report/Conference proceedingChapter

railway
industry
defence
method
trend

Audio-based Smart White Cane for Visually Impaired People

Zhangaskanov, D., Zhumatay, N. & Ali, M. H., Apr 2019, 2019 5th International Conference on Control, Automation and Robotics, ICCAR 2019. Institute of Electrical and Electronics Engineers Inc., p. 889-893 5 p. 8813508. (2019 5th International Conference on Control, Automation and Robotics, ICCAR 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrasonic sensors
Visually Impaired
Obstacle Detection
Digital control systems
Sensor
1 Citation (Scopus)

Automated segmentation of optical coherence tomography images

Kharmyssov, C., Ko, W. & Kim, J. R., Jan 10 2019, In : Chinese Optics Letters. 17, 1, 011701.

Research output: Contribution to journalArticle

Optical tomography
tomography
Retinal Pigments
epithelium
Processing

Automotive powertrain reliability modelling using an idea algebra

Amrin, A., Spitas, C., Vasileiou, G. & Spitas, V., Jan 1 2019, In : International Journal of Powertrains. 8, 3, p. 191-223 33 p.

Research output: Contribution to journalArticle

Powertrains
Algebra
Topology

Biogas home-production assessment using a selective sample of organic vegetable waste. A preliminary study

Durán-García, M., Ramírez, Y., Bravo, R. & Rojas-Solorzano, L., Feb 2012, Interciencia. p. 128-132 5 p. (Interciencia; vol. 37).

Research output: Chapter in Book/Report/Conference proceedingChapter

biogas
substrate
catalyst
energy use
potato

Camera based monitoring system for deep hole measurement

Ali, M. H. & Katsuki, A., Jan 18 2016, IEEM 2015 - 2015 IEEE International Conference on Industrial Engineering and Engineering Management. IEEE Computer Society, Vol. 2016-January. p. 109-114 6 p. 7385618

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cameras
Monitoring
Units of measurement
Security systems
Monitoring system
3 Citations (Scopus)

Causes of energy poverty in a cold and resource-rich country: evidence from Kazakhstan

Kerimray, A., De Miglio, R., Rojas-Solórzano, L. & Ó Gallachóir, B. P., Nov 7 2017, (Accepted/In press) In : Local Environment. p. 1-20 20 p.

Research output: Contribution to journalArticle

Kazakhstan
poverty
energy
cause
resource
2 Citations (Scopus)

CFD modeling of chamber filling in a micro-biosensor for protein detection

Islamov, M., Sypabekova, M., Kanayeva, D. & Rojas-Solórzano, L., Oct 3 2017, In : Biosensors. 7, 4, 45.

Research output: Contribution to journalArticle

Biosensing Techniques
Hydrodynamics
Microfluidics
Biosensors
Computational fluid dynamics
1 Citation (Scopus)

CFD modelling of flow characteristics in micro shock tubes

Mukhambetiyar, A., Jaeger, M. & Adair, D., Jan 1 2017, In : Journal of Applied Fluid Mechanics. 10, 4, p. 1061-1070 10 p.

Research output: Contribution to journalArticle

Shock tubes
flow characteristics
shock tubes
computational fluid dynamics
Computational fluid dynamics

CFD Study of Effects of Boundary Layer Suction on Transonic SC(2)-0714 Airfoil Performance

Khamedov, R., Baitlessov, R. & Rojas Solorzano, L., Nov 3 2017, p. pp. V007T09A063. 9 p.

Research output: Contribution to conferencePaper

Open Access
Airfoils
Computational fluid dynamics
Boundary layers
Shock waves
Drag
5 Citations (Scopus)

Challenges and Benefits of Digital Workflow Implementation in Aerospace Manufacturing Engineering

Rojo Abollado, J., Shehab, E. & Bamforth, P., 2017, Procedia CIRP. Elsevier B.V., p. 80-85 6 p. (Procedia CIRP; vol. 60).

Research output: Chapter in Book/Report/Conference proceedingChapter

Industry
Reengineering
Automation
Specifications
Aerospace applications

Challenges for flood risk management in flood-prone Sirajganj region of Bangladesh

Ali, M. H., Bhattacharya, B., Islam, A. K. M. S., Islam, G. M. T., Hossain, M. S. & Khan, A. S., Jan 1 2018, (Accepted/In press) In : Journal of Flood Risk Management.

Research output: Contribution to journalArticle

Risk management
risk management
Bangladesh
natural disaster
damages
4 Citations (Scopus)

Challenges in cost analysis of innovative maintenance of distributed high-value assets

Kirkwood, L., Shehab, E., Baguley, P., Amorim-Melo, P. & Durazo-Cardenas, I., 2014. 4 p.

Research output: Contribution to conferencePaper

Condition monitoring
Sensors
Costs
Processing
81 Citations (Scopus)

Challenges in enterprise resource planning implementation: State-of-the-art

Momoh, A., Roy, R. & Shehab, E., Jul 27 2010, Business Process Management Journal. p. 537-565 29 p. (Business Process Management Journal; vol. 16).

Research output: Chapter in Book/Report/Conference proceedingChapter

Search Engine
Research
Industry
Organizations
Databases
5 Citations (Scopus)

Combination Non-Destructive Test (NDT) Method for Early Damage Detection and Condition Assessment of Boiler Tubes

Vakhguelt, A., Kapayeva, S. D. & Bergander, M. J., Jan 1 2017, In : Procedia Engineering. 188, p. 125-132 8 p.

Research output: Contribution to journalConference article

Damage detection
Boilers
Ultrasonic measurement
Thickness measurement
Nondestructive examination

Comparative Analysis of Turbulence Models for Automotive Aerodynamic Simulation and Design

Igali, D., Mukhmetov, O., Zhao, Y., Fok, S. C. & Teh, S. L., Dec 1 2019, In : International Journal of Automotive Technology. 20, 6, p. 1145-1152 8 p.

Research output: Contribution to journalArticle

Turbulence models
Aerodynamics
Turbulent flow
Drag
Aerodynamic drag

Comparative micro-EDM studies on Ni based X-alloy using coated and uncoated tools

Perveen, A. & Jahan, M. P., Jan 1 2018, Manufacturing Sciences and Technologies VIII - 8th ICMST 2017. Debnath, S. (ed.). Trans Tech Publications, p. 13-19 7 p. (Materials Science Forum; vol. 911 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

machining
Machining
craters
energy
aerospace industry
1 Citation (Scopus)

Composite materials property determination by Rule of Mixture and Monte Carlo Simulation

Yerbolat, G., Amangeldi, S., Ali, M. H., Badanova, N., Ashirbeok, A. & Islam, G., Jan 16 2019, Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018. Meen, T-H. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 384-387 4 p. 8615034. (Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Materials properties
3D printers
simulation
Composite materials
Printing

Computerised symbolic planetary transmission modelling for automotive design

Spitas, C., Amrin, A., Amani, A., Vasileiou, G. & Spitas, V., Jan 1 2019, In : International Journal of Powertrains. 8, 1, p. 58-73 16 p.

Research output: Contribution to journalArticle

Inverse problems
Kinematics
Systems analysis