Department of Mechanical and Aerospace Engineering

Research Output 1999 2019

2017
1 Citation (Scopus)

Ultrasonic evaluation of the combined effect of corrosion and overheating in grade 20 steel water-wall boiler tubes

Kapayeva, S., Bergander, M. J., Vakhguelt, A. & Khairaliyev, S. I., Dec 1 2017, In : Insight: Non-Destructive Testing and Condition Monitoring. 59, 12, p. 637-643 7 p.

Research output: Contribution to journalArticle

Steel
Boilers
Ultrasonics
Corrosion
Nondestructive examination
3 Citations (Scopus)

Uncertainty Assessment for Measurement Processes in the Aerospace Manufacturing Industry

Rojo Abollado, J., Shehab, E., Rose, M. & Schröter, T., 2017, Procedia CIRP. Elsevier B.V., p. 326-331 6 p. (Procedia CIRP; vol. 60).

Research output: Chapter in Book/Report/Conference proceedingChapter

manufacturing
methodology
industry
certification
gauge

Validation of a numerical model of smoke propagation in a semi-enclosed space

Malik, A. & Rojas-Solórzano, L. R., 2017, Chemical Engineering Transactions. Italian Association of Chemical Engineering - AIDIC, Vol. 57. p. 1471-1476 6 p. (Chemical Engineering Transactions; vol. 57).

Research output: Chapter in Book/Report/Conference proceedingChapter

Smoke
Numerical models
Tunnels
Boundary conditions
Mesh generation
7 Citations (Scopus)
Modified Decomposition Method
Euler-Bernoulli Beam
Adomian Decomposition Method
Vibration Analysis
Vibration analysis

Wave-resistance computation via CFD and IGA-BEM solvers: A comparative study

Wang, X., Chouliaras, S. P., Kaklis, P. D., Ginnis, A. A. I., Politis, C. G. & Kostas, K. V., Jan 1 2017, Proceedings of the 27th International Ocean and Polar Engineering Conference, ISOPE 2017. Springer Verlag, p. 706-712 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Computer aided design
Computational fluid dynamics
Ships
Turbulence models
Splines
2016

2D Static droplet simulation with Shan-Chen multiphase Lattice Boltzmann Model

Rojas Solorzano, L., Dauyeshova, B. & Monaco, E., Nov 15 2016.

Research output: Contribution to conferencePaper

Open Access
multiphase flow
liquids
gas density
simulation
static tests
1 Citation (Scopus)

Analysis of decision alternatives of the deep borehole filter restoration problem

Abdildin, Y. G. & Abbas, A. E., Nov 1 2016, In : Energy. 114, p. 1306-1321 16 p.

Research output: Contribution to journalArticle

Boreholes
Uranium
Restoration
Uranium mines
Nuclear energy

Camera based monitoring system for deep hole measurement

Ali, M. H. & Katsuki, A., Jan 18 2016, IEEM 2015 - 2015 IEEE International Conference on Industrial Engineering and Engineering Management. IEEE Computer Society, Vol. 2016-January. p. 109-114 6 p. 7385618

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cameras
Monitoring
Units of measurement
Security systems
Monitoring system

Development and evaluation of aerogel-filled BMI sandwich panels for thermal barrier applications

Joshi, S. C., Sheikh, A. A., Dineshkumar, A. & Zhao, Y., Jan 1 2016, In : AIMS Materials Science. 3, 3, p. 938-953 16 p.

Research output: Contribution to journalArticle

Aerogels
Coatings
Glass manufacture
Temperature
Heat shielding
16 Citations (Scopus)

Development of a Whole Life Cycle Cost Model for Electrification options on the UK Rail System

Kirkwood, L., Giuntini, L., Shehab, E. & Baguley, P., 2016, Procedia CIRP. Elsevier B.V., p. 1-5 5 p. (Procedia CIRP; vol. 47).

Research output: Chapter in Book/Report/Conference proceedingChapter

Life Cycle Stages
Capital Expenditures
Costs and Cost Analysis
Equipment and Supplies
Health Expenditures

Electrochemical Characterization of Cu2S Cathode Prepared By Spray Pyrolysis with Heat Treatment

Kalimuldina, G. & Taniguchi, I., 2016.

Research output: Contribution to conferenceAbstract

1 Citation (Scopus)

Energy efficiency options for buildings: insights from buildings energy audit reports in Kazakhstan

Rojas Solorzano, L., Kerimray, A. & Bektineyev, R., Nov 15 2016.

Research output: Contribution to conferencePaper

Open Access
Energy efficiency
Insulation
Energy utilization
Economics
Roofs
14 Citations (Scopus)

Fabrication and Properties of Carbon-Encapsulated Cobalt Nanoparticles over NaCl by CVD

Li, H., Li, Y., Zhang, Y., Liang, C., Wang, H., Li, B., Adair, D. & Bakenov, Z., Dec 1 2016, In : Nanoscale Research Letters. 11, 1, 432.

Research output: Contribution to journalArticle

Cobalt
Chemical vapor deposition
cobalt
Carbon
vapor deposition

Ground-source heat pump cooling systems in temperate cities. Case study: Mexico City

Gómez-Campos, A., Hardikar, P. A., Prabandani, M. N., Osorio-Silva, A. F. & Rojas-Solórzano, L., Jan 1 2016.

Research output: Contribution to conferencePaper

Geothermal heat pumps
Cooling systems
Gas emissions
Greenhouse gases
Electricity

Ice resistant structure optimisation of the steel conductor supported wellhead platform in the caspian sea

Tleshev, M., Spitas, C. & Kim, J., Jan 1 2016, Arctic Technology Conference 2016. Offshore Technology Conference

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wellheads
Steel
wellhead
Ice
steel
3 Citations (Scopus)

Integration of Cost-risk Assessment of Denial of Service within an Intelligent Maintenance System

Carlander, L., Kirkwood, L., Shehab, E., Baguley, P. & Durazo-Cardenas, I., 2016, Procedia CIRP. Elsevier B.V., p. 66-71 6 p. (Procedia CIRP; vol. 47).

Research output: Chapter in Book/Report/Conference proceedingChapter

Risk assessment
Costs
Rails
Industry
Asset management
6 Citations (Scopus)

Modelling of cryogenic cooling system design concepts for superconducting aircraft propulsion

Palmer, J. & Shehab, E., 2016, In : IET Electrical Systems in Transportation. 6, 3, p. 170-178 9 p.

Research output: Contribution to journalArticle

Aircraft propulsion
Cooling systems
Cryogenics
Compressors
Systems analysis

Multi-Size Piping Approach to Increase Gas Pipeline Productivity by Selective Reduction of Holdup

Rojas Solorzano, L., Baitlessov, R. & Kaibaldiyeva, U., Oct 26 2016.

Research output: Contribution to conferencePaper

Open Access
Gas pipelines
Pipelines
Productivity
Pressure drop
Hydrocarbons

Propeller wing aerodynamic interference for small UAVs during VSTOL

Adair, D. & Alimaganbetov, M., 2016, IACAS 2016 - 56th Israel Annual Conference on Aerospace Sciences. Israel Annual Conference on Aerospace Sciences

Research output: Chapter in Book/Report/Conference proceedingConference contribution

aerodynamic interference
propellers
Propellers
Unmanned aerial vehicles (UAV)
pilotless aircraft
1 Citation (Scopus)

Review design of concrete structures: Evaluating learning effectiveness

Jaeger, M., Al-Mughrabi, A., Reda, M. & Adair, D., May 19 2016, Proceedings of 2016 IEEE Global Engineering Education Conference, EDUCON 2016: "Smart Education in Smart Cities". IEEE Computer Society, Vol. 10-13-April-2016. p. 87-92 6 p. 7474536

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Concrete construction
Students
learning
Group theory
Statistical tests

Seismic Activity and Geochemical Monitoring of Thermal Waters in Thermopylae

Zarikas, V., Anagnostou, K. E., Avlakiotis, P., Kotsopoulo, S., Liolios, C., Perantzaki, G. S. & Lygdis, A., Mar 1 2016, In : Journal of Applied Sciences. 16, 3, p. 113-123

Research output: Contribution to journalArticle

thermal water
monitoring
seismic activity
2 Citations (Scopus)

Simulations of fluid-structure interaction of a wind turbine

Zheng, S., Chua, L. P. & Zhao, Y., Jan 1 2016, Fluid-Structure-Sound Interactions and Control - Proceedings of the 3rd Symposium on Fluid-Structure-Sound Interactions and Control. Lucey, A. D., Liu, Y., Huang, L. & Zhou, Y. (eds.). Springer Heidelberg, p. 407-413 7 p. (Lecture Notes in Mechanical Engineering; vol. Part F3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fluid structure interaction
Wind turbines
Flow fields
Turbomachine blades
Momentum
9 Citations (Scopus)
Lithium batteries
lithium batteries
Metal foil
foils
Cathodes

Viability of energy efficiency measures in resort buildings - Case study: Mazatlan, Mexico

Rojas Solorzano, L., Romero, M., Hari, K. A., Cordero, I. & Min, J., Nov 15 2016.

Research output: Contribution to conferencePaper

Open Access
Energy efficiency
Lighting
Energy conservation
Costs
Hotels

Viability of on-grid residential PV systems in southwest Kazakhstan. Case: Mangystau Region

Rojas Solorzano, L., Khairlybayeva, N., Samayeva, Z. & Temirbekova, Z., Nov 15 2016.

Research output: Contribution to conferencePaper

Open Access
Incident solar radiation
Roofs
Life cycle
Electricity
Silicon
2015
1 Citation (Scopus)

An Integrated Aerospace Requirement Setting and Risk Analysis Tool for Life Cycle Cost Reduction and System Design Improvement

Estébanez, L. R., Shehab, E., Sydor, P., Mackley, T., John, P. & Harrison, A., 2015, Procedia CIRP. Elsevier B.V., p. 78-83 6 p. (Procedia CIRP; vol. 38).

Research output: Chapter in Book/Report/Conference proceedingChapter

Risk analysis
Cost reduction
Life cycle
Systems analysis
Aircraft engines

Enhancing service requirements of technical product-service systems

Estebanez, L. R., Shehab, E., Sydor, P., MacKley, T., John, P. & Harrison, A., 2015, Procedia CIRP. Elsevier B.V., p. 7-11 5 p. (Procedia CIRP; vol. 37).

Research output: Chapter in Book/Report/Conference proceedingChapter

Life cycle
Industry
Weibull distribution
Cost reduction
Costs

Fault tolerant control of electromagnetic suspension system with simultaneous sensor and actuator faults

Alizadeh, T. & Barzegari, S., Sep 8 2015, 2015 10th Asian Control Conference: Emerging Control Techniques for a Sustainable World, ASCC 2015. Institute of Electrical and Electronics Engineers Inc., 7244711

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Actuators
Sensors
Magnets
Controllers
3 Citations (Scopus)

Long tail uncertainty distributions in novel risk probability classification

Schwabe, O., Shehab, E. & Erkoyuncu, J., 2015. 6 p.

Research output: Contribution to conferencePaper

Uncertainty
Long tail
Manufacturing
Aerospace
Enterprise risk management
23 Citations (Scopus)

Nickel Hexacyanoferrate Nanoparticles as a Low Cost Cathode Material for Lithium-Ion Batteries

Omarova, M., Koishybay, A., Yesibolati, N., Mentbayeva, A., Umirov, N., Ismailov, K., Adair, D., Babaa, M. R., Kurmanbayeva, I. & Bakenov, Z., Dec 1 2015, In : Electrochimica Acta. 184, p. 58-63 6 p.

Research output: Contribution to journalArticle

Nickel
Cathodes
Lithium
Nanoparticles
Costs
2 Citations (Scopus)

Uncertainty of Net Present Value Calculations and the Impact on Applying Integrated Maintenance Approaches to the UK Rail Industry

Kirkwood, L., Shehab, E., Baguley, P. & Starr, A., 2015. 5 p.

Research output: Contribution to conferencePaper

Rails
Condition monitoring
Costs
Industry
Asset management
13 Citations (Scopus)

Uncertainty quantification metrics for whole product life cycle cost estimates in aerospace innovation

Schwabe, O., Shehab, E. & Erkoyuncu, J., Aug 1 2015, Progress in Aerospace Sciences. Elsevier, p. 1-24 24 p. (Progress in Aerospace Sciences; vol. 77).

Research output: Chapter in Book/Report/Conference proceedingChapter

Life cycle
Innovation
Costs
Airframes
Uncertainty
2014
10 Citations (Scopus)

A conceptual model for evaluating product-service systems leanness in UK manufacturing companies

Elnadi, M. & Shehab, E., 2014, Procedia CIRP. Elsevier B.V., p. 281-286 6 p. (Procedia CIRP; vol. 22).

Research output: Chapter in Book/Report/Conference proceedingChapter

Conceptual model
Product-service systems
Manufacturing companies
Excellence
Workforce
4 Citations (Scopus)

An aerospace requirements setting model to improve system design

Centrich, X. T., Shehab, E., Sydor, P., Mackley, T., John, P. & Harrison, A., 2014. 6 p.

Research output: Contribution to conferencePaper

Systems analysis
Industry
Engines
Weibull distribution
Distribution functions
4 Citations (Scopus)

Challenges in cost analysis of innovative maintenance of distributed high-value assets

Kirkwood, L., Shehab, E., Baguley, P., Amorim-Melo, P. & Durazo-Cardenas, I., 2014. 4 p.

Research output: Contribution to conferencePaper

Condition monitoring
Sensors
Costs
Processing
3 Citations (Scopus)

Cost drivers of integrated maintenance in high-value systems

Amorim-Melo, P., Shehab, E., Kirkwood, L. & Baguley, P., 2014. 5 p.

Research output: Contribution to conferencePaper

Costs
Rails
Model structures
Resource allocation
Health
2 Citations (Scopus)

Enhancement of digital design data availability in the aerospace industry

R., R. (ed.), Shehab, E., Bouin-Portet, M., Hole, R. & Fowler, C., 2014, 19th CIRP Design Conference: Competitive Design. R., R. & E., S. (eds.). Decision Engineering Centre, Cranfield University, Cranfield, Bedford, MK43 0AL, United Kingdom: Cranfield University Press, p. 589-594 6 p. (19th CIRP Design Conference: Competitive Design).

Research output: Chapter in Book/Report/Conference proceedingChapter

Aerospace industry
Availability
Aerospace engineering
Coloring
Product design

Measurement and Analysis of Physicochemical Parameters Concerning Thermopylae Natural Hot Spring Waters

Zarikas, V., Anagnostou, K. E., Avlakiotis, P., Kotsopoulo, S., Liolios, C., Latsos, T., Perantzaki, G., Lygdis, A., Lykourgiot, A. & Antoniou, D., Dec 1 2014, In : Journal of Applied Sciences. 14, 19, p. 2331-2340

Research output: Contribution to journalArticle

Hot springs
Water
2013
18 Citations (Scopus)

A3 thinking approach to support knowledge-driven design

Mohd Saad, N., Al-Ashaab, A., Maksimovic, M., Zhu, L., Shehab, E., Ewers, P. & Kassam, A., 2013, In : International Journal of Advanced Manufacturing Technology. p. 1371-1386 16 p.

Research output: Contribution to journalArticle

Electromagnetic compatibility
Product design
Product development
Life cycle
Productivity

Design of loboid gear pairs using involute discretization

Spitas, V. & Spitas, C., Jan 1 2013, Power Transmissions - Proceedings of the 4th International Conference. Dobre, G. (ed.). Springer Netherlands, p. 417-425 9 p. (Mechanisms and Machine Science; vol. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Gear teeth
Rotary pumps
Blowers
Pneumatics
1 Citation (Scopus)

Dynamical simulation and calculation of the load factor of spur gears with indexing errors and profile modifications for optimal gear design

Spitas, C., Spitas, V. & Rajabalinejad, M., Jan 1 2013, Power Transmissions - Proceedings of the 4th International Conference. Dobre, G. (ed.). Springer Netherlands, p. 183-196 14 p. (Mechanisms and Machine Science; vol. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Spur gears
Gears
Gear teeth
Geometry

Emission fluxes of different metals in aerosol emitted during frying-effect of frying pan

Torkmahalleh, M., Zhao, Y., Goldasteh, I., Rossner, A., Hopke, P. K. & Ferro, A. R., 2013, Conference Environment and Health – Bridging South, North, East and West. Basel, Switzerland

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Enhancement of product information collaboration and access in the aerospace industry

Shehab, E., Fowler, C., Rodriguez Gil, A., Abdalla, H., Darwish, M., Abdulhafed, H., Ahmed, A., Ahouie, H., Alechnovic, A., Paumes, C., Tacchini, E., Urbane, I. & Richardson, M., Jun 1 2013, International Journal of Production Research. p. 3225-3240 16 p. (International Journal of Production Research; vol. 51).

Research output: Chapter in Book/Report/Conference proceedingChapter

Aerospace industry
Cost reduction
Product development
Information management
Costs

Influence of food surface area on PM2.5 and particle number concentration during frying

Torkmahalleh, M., Zhao, Y., Goldasteh, I., Rossner, A., Hopke, P. K. & Ferro, A. R., 2013, European Aerosol Conference. Prague, Czech Republic

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Performance evaluation of LPG desulfurization by adsorption for hydrogen production.

Kazerooni, M. R. M., Farahbod, F., Zhang, Y., Zhao, Y., Konarov, A., Gosselink, D., Soboleski, HG., Chen, P., Hosseinkhani, M. & Montazer, M., 2013, In : Journal of Environmental Science and Technology. 9, 1, p. 517-521 5 p.

Research output: Contribution to journalArticle

Service design process for result oriented product service system (RPSS): Challenges and future trends in the healthcare sector

Abu-Salim, T. & Shehab, E., 2013, Journal of Neuroscience and Neuroengineering. American Scientific Publishers (E-mail: jnn@rug.nl girard@lirmm.fr wolfram.schommers@iwr.fzk.de jbmbe.mohanty@gmail.com ), p. 324-334 11 p. (Journal of Neuroscience and Neuroengineering; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingChapter

Biomedical equipment
Health care
Industrial applications
Sustainable development
Industry

Thermal modelling of a lithium-Ion aqueous battery

Adair, D., Kalimuldina, G. & Bakenov, Z., 2013.

Research output: Contribution to conferencePaper

Towards optimum involute gear design by combining addendum and thickness modifications

Spitas, V. & Spitas, C., Jan 1 2013, Power Transmissions - Proceedings of the 4th International Conference. Dobre, G. (ed.). Springer Netherlands, p. 173-181 9 p. (Mechanisms and Machine Science; vol. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Gear teeth
Photoelasticity
Cutting tools
Pitting