Department of Mechanical and Aerospace Engineering

Research output

Research output per year 1984 2021

• 6318 Citations
• 31 h-Index
• 288 Article
• 125 Conference contribution
• 50 Chapter
• 41 Paper
• 61 More
  • 29 Conference article
  • 12 Chapter (peer-reviewed)
  • 10 Review article
  • 3 Abstract
  • 3 Editorial
  • 2 Book
  • 1 Poster
  • 1 Comment/debate

Research output per year

Research output per year

Search results

• 2019

  Synthesis and optimization considerations for a knee orthosis based on a Watt’s six-bar linkage

  Xydas, E., Abdikadirova, B. & Konstantinos, K., 2019, Biosystems and Biorobotics. Springer International Publishing, p. 18-22 5 p. (Biosystems and Biorobotics; vol. 22).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Cost effectiveness
  • Energy harvesting
  • Kinematics
  • Trajectories
  • Costs
• 2018

  Effectiveness and prospects of implementing a solar water heating system in Astana, Kazakhstan

  Absemetov, A., Mukushev, M., Yerubayev, A., Zhumanalina, Z. & Rojas Solorzano, L., 2018, Green Energy and Technology. Springer Verlag, p. 603-615 13 p. (Green Energy and Technology).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Heating
  • heating
  • Water
  • Electric heating
  • Economics

• Effectiveness of a Helix Tube to Water Cool a Battery Module

  Adair, D., Ismailov, K. & Bakenov, Z., Sep 20 2018, Heat and Mass Transfer - Advances in Modelling and Experimental Study for Industrial Applications. InTech, (Heat and Mass Transfer - Advances in Modelling and Experimental Study for Industrial Applications).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Traveling wave tubes
  • Battery Pack
  • Water
  • Hot Temperature
  • Temperature

• Micro-EDM Drilling

  Oliaei, S. N. B., Jahan, M. P. & Perveen, A., Dec 16 2018, Micro-electrical Discharge Machining Processes: Technologies and Applications. Kibria, G., Jahan, M. P. & Bhattacharyya, B. (eds.). Singapore: Springer Singapore, p. 1-21 21 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Drilling
  • Alloy steel
  • Industrial applications
  • Machining
  • Fabrication

• Sequential Micro-EDM

  Rashef Mahbub, MD., Perveen, A. & Jahan, M. P., Dec 16 2018, Micro-electrical Discharge Machining Processes: Technologies and Applications. Kibria, G., Jahan, M. P. & Bhattacharyya, B. (eds.). Singapore: Springer Singapore, p. 209-229 21 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Military electronic countermeasures
  • Milling (machining)
  • Micromachining
  • Drilling
  • Lasers

• Technical and economic prefeasibility analysis of residential solar PV system in South Kazakhstan

  Assamidanov, A., Nogerbek, N. & Rojas-Solorzano, L., 2018, Green Energy and Technology. Springer Verlag, p. 783-792 10 p. (Green Energy and Technology).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • photovoltaic system
  • economic analysis
  • Economic analysis
  • cost-benefit
  • subsidy
  1 Citation (Scopus)

• Technical and economic prefeasibility study of mini-hydro power plants in Venezuela case study: El Valle river

  Trejo, V., Diaz, G. & Rojas-Solorzano, L., 2018, Green Energy and Technology. Springer Verlag, p. 715-724 10 p. (Green Energy and Technology).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Rivers
  • power plant
  • Power plants
  • Economics
  • economics
• 2017

  A review of digital wayfinding technologies in the transportation industry

  Peña Miñano, S., Kirkwood, L., Court, S., Farnsworth, M., Orlovs, I., Shehab, E. & Tinworth, N., 2017, Advances in Transdisciplinary Engineering. IOS Press BV, p. 207-212 6 p. (Advances in Transdisciplinary Engineering; vol. 6).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • industry
  • information system
  • station
  • consumer information
  • demand
  6 Citations (Scopus)

• A review of technical challenges of laser drilling manufacturing process

  Sarfraz, S., Shehab, E. & Salonitis, K., 2017, Advances in Transdisciplinary Engineering. (Advances in Transdisciplinary Engineering; vol. 6).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Methicillin-Resistant Staphylococcus aureus
  • Lasers
  • Chromosomes
  • Panton-Valentine leukocidin
  • Multilocus Sequence Typing
  3 Citations (Scopus)

• Challenges and Benefits of Digital Workflow Implementation in Aerospace Manufacturing Engineering

  Rojo Abollado, J., Shehab, E. & Bamforth, P., 2017, Procedia CIRP. Elsevier B.V., p. 80-85 6 p. (Procedia CIRP; vol. 60).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Aerospace
  • Manufacturing
  • Business Process
  • Automation
  • Product Development
  12 Citations (Scopus)

• Introduction to structural ageing-specific functions for computational models based on synaptic networks

  Mavrikas, G., Spitas, V. & Spitas, C., Nov 23 2017, The Ageing of Materials and Structures: Towards Scientific Solutions for the Ageing of Our Assets. Springer International Publishing, p. 197-215 19 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Aging of materials
  • Large scale systems
  • savings
  • Helicopters
  • Systems analysis

• Machining of Glass Materials: An Overview

  Perveen, A. & Molardi, C., Apr 30 2017, Advanced Manufacturing Technologies: Modern Machining, Advanced Joining, Sustainable Manufacturing. Gupta, K. (ed.). Cham: Springer International Publishing AG, p. 23-47 25 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • glass
  • material
  • damage

• Machining of Microshapes and Features

  Perveen, A. & Molardi, C., Oct 17 2017, Micro and Precision Manufacturing. Gupta, K. (ed.). Cham: Springer International Publishing AG, p. 1-19 19 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Machining
  • Fabrication
  • Engineers

• Optimisation strategy for efficient platform train interface activity

  Farnsworth, M., Kirkwood, L., Court, S., Shehab, E. & Tinworth, N., 2017, Advances in Transdisciplinary Engineering. IOS Press BV, p. 233-238 6 p. (Advances in Transdisciplinary Engineering; vol. 6).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Customer satisfaction
  • Seats
  • Rails
  3 Citations (Scopus)

• Requirements analysis of digital technology for the rail industry

  Court, S., Kirkwood, L., Farnsworth, M., Orlovs, I., Shehab, E. & Tinworth, N., 2017, Advances in Transdisciplinary Engineering. IOS Press BV, p. 201-206 6 p. (Advances in Transdisciplinary Engineering; vol. 6).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Rails
  • Industry
  • Smart cards
  • Cellular telephones
  • Economics
  1 Citation (Scopus)

• Uncertainty Assessment for Measurement Processes in the Aerospace Manufacturing Industry

  Rojo Abollado, J., Shehab, E., Rose, M. & Schröter, T., 2017, Procedia CIRP. Elsevier B.V., p. 326-331 6 p. (Procedia CIRP; vol. 60).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Uncertainty
  • Industry
  • Aerospace industry
  • Strain gages
  • Calibration
  6 Citations (Scopus)

• Validation of a numerical model of smoke propagation in a semi-enclosed space

  Malik, A. & Rojas-Solórzano, L. R., 2017, Chemical Engineering Transactions. Bakalis, S., Piazza, L., Pierucci, S. & Klemes, J. J. (eds.). Italian Association of Chemical Engineering - AIDIC, Vol. 57. p. 1471-1476 6 p. (Chemical Engineering Transactions; vol. 57).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Smoke
  • Numerical models
  • Tunnels
  • Boundary conditions
  • Mesh generation
• 2016

  Development of a Whole Life Cycle Cost Model for Electrification options on the UK Rail System

  Kirkwood, L., Giuntini, L., Shehab, E. & Baguley, P., 2016, Procedia CIRP. Elsevier B.V., p. 1-5 5 p. (Procedia CIRP; vol. 47).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Life Cycle Stages
  • Capital Expenditures
  • Costs and Cost Analysis
  • Equipment and Supplies
  • Health Expenditures
  22 Citations (Scopus)

• Integration of Cost-risk Assessment of Denial of Service within an Intelligent Maintenance System

  Carlander, L., Kirkwood, L., Shehab, E., Baguley, P. & Durazo-Cardenas, I., 2016, Procedia CIRP. Elsevier B.V., p. 66-71 6 p. (Procedia CIRP; vol. 47).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Risk assessment
  • Costs
  • Industry
  • Rails
  • Uncertainty
  4 Citations (Scopus)
• 2015

  An Integrated Aerospace Requirement Setting and Risk Analysis Tool for Life Cycle Cost Reduction and System Design Improvement

  Estébanez, L. R., Shehab, E., Sydor, P., Mackley, T., John, P. & Harrison, A., 2015, Procedia CIRP. Elsevier B.V., p. 78-83 6 p. (Procedia CIRP; vol. 38).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Risk analysis
  • Cost reduction
  • Life cycle
  • Systems analysis
  • Aircraft engines
  1 Citation (Scopus)

• Enhancing service requirements of technical product-service systems

  Estebanez, L. R., Shehab, E., Sydor, P., MacKley, T., John, P. & Harrison, A., 2015, Procedia CIRP. Elsevier B.V., p. 7-11 5 p. (Procedia CIRP; vol. 37).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Product-service Systems
  • Product Reliability
  • Weibull Distribution
  • Product Strategy
  • Life Cycle Cost

• Uncertainty quantification metrics for whole product life cycle cost estimates in aerospace innovation

  Schwabe, O., Shehab, E. & Erkoyuncu, J., Aug 1 2015, Progress in Aerospace Sciences. Elsevier, p. 1-24 24 p. (Progress in Aerospace Sciences; vol. 77).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Life Cycle Cost
  • Cost Estimates
  • Quantification
  • Aerospace
  • Product Lifecycle
  17 Citations (Scopus)
• 2014

  A conceptual model for evaluating product-service systems leanness in UK manufacturing companies

  Elnadi, M. & Shehab, E., 2014, Procedia CIRP. Elsevier B.V., p. 281-286 6 p. (Procedia CIRP; vol. 22).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Product-service Systems
  • Manufacturing Companies
  • Conceptual Model
  • Supplier Relationship Management
  • Process Optimization
  15 Citations (Scopus)

• Enhancement of digital design data availability in the aerospace industry

  R., R. (ed.), Shehab, E., Bouin-Portet, M., Hole, R. & Fowler, C., 2014, 19th CIRP Design Conference: Competitive Design. R., R. & E., S. (eds.). Decision Engineering Centre, Cranfield University, Cranfield, Bedford, MK43 0AL, United Kingdom: Cranfield University Press, p. 589-594 6 p. (19th CIRP Design Conference: Competitive Design).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Aerospace industry
  • Availability
  • Aerospace engineering
  • Coloring
  • Product development
  2 Citations (Scopus)
• 2013

  A probabilistic scoring method in multiple-choice testing incorporating partial knowledge

  Adair, D. & Jaeger, M., May 1 2013, Curriculum Development, Innovation and Reform. Nova Science Publishers, Inc., p. 109-124 16 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • student

• Enhancement of product information collaboration and access in the aerospace industry

  Shehab, E., Fowler, C., Rodriguez Gil, A., Abdalla, H., Darwish, M., Abdulhafed, H., Ahmed, A., Ahouie, H., Alechnovic, A., Paumes, C., Tacchini, E., Urbane, I. & Richardson, M., Jun 1 2013, International Journal of Production Research. p. 3225-3240 16 p. (International Journal of Production Research; vol. 51).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Aerospace Industry
  • Product Information
  • Enhancement
  • Scenarios
  • Original Equipment Manufacturers
  6 Citations (Scopus)

• Service design process for result oriented product service system (RPSS): Challenges and future trends in the healthcare sector

  Abu-Salim, T. & Shehab, E., 2013, Journal of Neuroscience and Neuroengineering. American Scientific Publishers (E-mail: jnn@rug.nl girard@lirmm.fr wolfram.schommers@iwr.fzk.de jbmbe.mohanty@gmail.com ), p. 324-334 11 p. (Journal of Neuroscience and Neuroengineering; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Product-service Systems
  • Service Design
  • Future Trends
  • Design Process
  • Healthcare
• 2012

  A cost estimating framework for electronic, electrical and electromechanical (EEE) components obsolescence within the use-oriented product-service systems contracts

  Romero Rojo, F. J., Roy, R., Shehab, E., Cheruvu, K. & Mason, P., Jan 2012, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. p. 154-166 13 p. (Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture; vol. 226).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Cost estimating
  • Obsolescence
  • Life cycle
  • Costs
  16 Citations (Scopus)

• A study on obsolescence resolution profiles

  Romero Rojo, F. J., Roy, R., Shehab, E. & Cheruvu, K., Jan 2012, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. p. 167-177 11 p. (Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture; vol. 226).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Obsolescence
  4 Citations (Scopus)

• Biogas home-production assessment using a selective sample of organic vegetable waste. A preliminary study

  Durán-García, M., Ramírez, Y., Bravo, R. & Rojas-Solorzano, L., Feb 2012, Interciencia. p. 128-132 5 p. (Interciencia; vol. 37).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • vegetable waste
  • biogas
  • substrate
  • catalyst
  • environmental liability

• Cost engineering for manufacturing: Current and future research

  Xu, Y., Elgh, F., Erkoyuncu, J. A., Bankole, O., Goh, Y., Cheung, W. M., Baguley, P., Wang, Q., Arundachawat, P., Shehab, E., Newnes, L. & Roy, R., Apr 1 2012, International Journal of Computer Integrated Manufacturing. p. 300-314 15 p. (International Journal of Computer Integrated Manufacturing; vol. 25).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Cost Engineering
  • Manufacturing
  • Risk Management
  • Uncertainty Management
  • Brainstorming
  53 Citations (Scopus)

• Influence of vegetation on compound-channel turbulent field

  Azevedo, R., Leal, J. B. & Rojas-Solórzano, L., 2012, River Flow 2012 - Proceedings of the International Conference on Fluvial Hydraulics. p. 209-216 8 p. (River Flow 2012 - Proceedings of the International Conference on Fluvial Hydraulics; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • floodplain
  • vegetation
  • momentum transfer
  • river
  • dissipation

• Knowledge visualization in product development using trade-off curves

  Maksimovic, M., Al-Ashaab, A., Sulowski, R. & Shehab, E., 2012, IEEE International Conference on Industrial Engineering and Engineering Management. IEEE Computer Society, p. 708-711 4 p. (IEEE International Conference on Industrial Engineering and Engineering Management).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Product Development
  • Visualization
  • Trade-offs
  • European Commission
  • Lean Thinking
  12 Citations (Scopus)
• 2011

  A Framework for E-Service Implementation in the Developing Countries

  Hassan, H. S., Shehab, E. & Peppard, J., Jan 2011, International Journal of Customer Relationship Marketing and Management. p. 55-68 14 p. (International Journal of Customer Relationship Marketing and Management; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • developing world
  • services
  • public
  • conceptual framework
  • citizen

• Detailed cost estimating in the automotive industry: Data and information requirements

  Roy, R., Souchoroukov, P. & Shehab, E., 2011, Intern. Journal of Production Economics. p. 694-707 14 p. (Intern. Journal of Production Economics; vol. 133).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Cost Estimating
  • Information Requirements
  • Industry Data
  • Automotive Industry
  • Cost Estimates
  37 Citations (Scopus)

• Integrated new product introduction challenges in aerospace manufacturing engineering

  Maginness, M., Shehab, E. & Beadle, C., 2011, Global Product Development - Proceedings of the 20th CIRP Design Conference. Springer Berlin, p. 247-252 6 p. (Global Product Development - Proceedings of the 20th CIRP Design Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • New Product Introduction
  • Aerospace
  • Integrated
  • Manufacturing
  • Design Engineering

• Recent advances in e-service in the public sector: State-of-the-art and future trends

  Hassan, H. S., Shehab, E. & Peppard, J., Jun 2011, Business Process Management Journal. p. 526-545 20 p. (Business Process Management Journal; vol. 17).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Public Sector
  • Publications
  • Research Personnel

• Semantic knowledge based approach for product maintenance support

  Sanya, I., Shehab, E., Roy, R., Houseman, O. & Jonik, M., 2011, Global Product Development - Proceedings of the 20th CIRP Design Conference. Springer Berlin, p. 73-80 8 p. (Global Product Development - Proceedings of the 20th CIRP Design Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Semantics
  • Knowledge management
  • Reusability
  • Maintainability
  • Industry

• Towards a cost modelling framework for outsourcing ERP systems

  Shehab, E., Thomassin, M. & Badawy, M., 2011, Advanced Concurrent Engineering. p. 401-408 8 p. (Advanced Concurrent Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Cost Modeling
  • Outsourcing
  • ERP Systems
  • Costs
  • Economics
  1 Citation (Scopus)
• 2010

  Challenges in enterprise resource planning implementation: State-of-the-art

  Momoh, A., Roy, R. & Shehab, E., Jul 27 2010, Business Process Management Journal. p. 537-565 29 p. (Business Process Management Journal; vol. 16).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Change Management
  • Search Engine
  • Data Accuracy
  • Industry
  • Organizations
  91 Citations (Scopus)

• Enhancing digital design data availability in the aerospace industry

  Shehab, E., Bouin-Portet, M., Hole, R. & Fowler, C., 2010, CIRP Journal of Manufacturing Science and Technology. p. 240-246 7 p. (CIRP Journal of Manufacturing Science and Technology; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Aerospace Industry
  • Product Design and Development
  • Airbus
  • Timeliness
  • Visualization
  7 Citations (Scopus)
• 2009

  A Methodology for Variability Reduction in Manufacturing Cost Estimating in the Automotive Industry based on Design Features

  Rojo, F. J. R., Roy, R. & Shehab, E., 2009, Structure. p. 197-201 5 p. (Structure).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Cost Estimating
  • Cost Estimates
  • Manufacturing Cost
  • Automotive Industry
  • Methodology

• Developing a current capability design for manufacture framework in the aerospace industry

  Whiteside, A., Shehab, E., Beadle, C. & Percival, M., 2009, 19th CIRP Design Conference. p. 223-228 6 p. (19th CIRP Design Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Design for Manufacture
  • Aerospace Industry
  • Product Design and Development
  • Product Complexity
  • Information Requirements

• Technical product-service systems: Some implications for the machine tool industry

  Azarenko, A., Roy, R., Shehab, E. & Tiwari, A., 2009, Journal of Manufacturing Technology Management. p. 700-722 23 p. (Journal of Manufacturing Technology Management; vol. 20).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Industry
  • Manufacturing Industry
  • Technology
  • Costs and Cost Analysis
  1151 Citations (Scopus)
• 2007

  State-of-the-art in product-service systems

  Baines, T. S., Lightfoot, H. W., Evans, S., Neely, A., Greenough, R., Peppard, J., Roy, R., Shehab, E., Braganza, A., Tiwari, A., Alcock, J. R., Angus, J. P., Basti, M., Cousens, A., Irving, P., Johnson, M., Kingston, J., Lockett, H., Martinez, V., Michele, P. & 3 others, Tranfield, D., Walton, I. M. & Wilson, H., 2007, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. p. 1543-1552 10 p. (Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture; vol. 221).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Outcome Assessment (Health Care)
  1209 Citations (Scopus)
• 2005

  The PALIO Framework for Adaptive Information Services

  Stephanidis, C., Paramythis, A., Zarikas, V. & Savidis, A., Aug 18 2005, Multiple User Interfaces: Cross-Platform Applications and Context-Aware Interfaces. wiley, p. 69-92 24 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
  18 Citations (Scopus)
• 2004

  3-D CFD modeling-investigation of potential vortex formation at the intakes of Caruachi Powerhouse

  Marcano, A., Rojas-Solorzano, L., Reyes, M. & Marin, J., 2004, HYDRAULICS OF DAMS AND RIVER STRUCTURES. p. 61-68 8 p. (HYDRAULICS OF DAMS AND RIVER STRUCTURES).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • cofferdam
  • vortex
  • modeling
  • savings
  • entrainment
• 2003

  Parallel computation of unsteady three-dimensional incompressible viscous flow using an unstructured multigrid method

  Tai, C. H., Zhao, Y. & Liew, K. M., Jun 2 2003, Computational Fluid and Solid Mechanics 2003. Elsevier, p. 1148-1152 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Viscous flow
  • Compressibility
  • Unsteady flow
  • Message passing
  • Decomposition
• 2002

  An intelligent knowledge-based system for product cost modelling

  Shehab, E. & Abdalla, H., 2002, International Journal of Advanced Manufacturing Technology. p. 49-65 17 p. (International Journal of Advanced Manufacturing Technology; vol. 19).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Knowledge based systems
  • Costs
  • Knowledge representation
  • Product development
  • Machining
  92 Citations (Scopus)
• 1999

  Run life enlargement methodology for ball-and-seat check valves used in artificial lift pumping units

  Zarea, S., Kabboul, F. & Rojas-Solorzano, L., 1999, SPE Latin American and Caribbean Petroleum Engineering Conference Proceedings. (SPE Latin American and Caribbean Petroleum Engineering Conference Proceedings; vol. 1999-Janua).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Seats
  • Pressure drop
  • Oils
  • Leakage (fluid)
  • Test facilities