Department of Mechanical and Aerospace Engineering

Research Output

Filter
Conference contribution
2020

Bayesian networks based policy making in the renewable energy sector

Zholdasbayeva, M., Zarikas, V. & Poulopoulos, S., Jan 1 2020, ICAART 2020 - Proceedings of the 12th International Conference on Agents and Artificial Intelligence. Rocha, A., Steels, L. & van den Herik, J. (eds.). SciTePress, p. 453-462 10 p. (ICAART 2020 - Proceedings of the 12th International Conference on Agents and Artificial Intelligence; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bending Behavior of Sandwich Composite Structures of 3D-Printed Materials

Ali, M. H. & Batai, S., Jan 1 2020, Advances in Materials and Manufacturing Engineering - Proceedings of ICAMME 2019. Li, L., Pratihar, D. K., Chakrabarty, S. & Mishra, P. C. (eds.). Springer, p. 281-287 7 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mechanical Performance Optimization of 3D Printing Materials

Batai, S. & Ali, M. H., Jan 1 2020, Advances in Materials and Manufacturing Engineering - Proceedings of ICAMME 2019. Li, L., Pratihar, D. K., Chakrabarty, S. & Mishra, P. C. (eds.). Springer, p. 257-263 7 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2019

A new algorithm to control dynamic stability of higher-order systems

Mir-Nasiri, N. & Ali, M. H., Apr 8 2019, Proceedings - 8th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2018. Institute of Electrical and Electronics Engineers Inc., p. 53-58 6 p. 8684988. (Proceedings - 8th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Application of the Adomian modified decomposition method for a beam with a single section discontinuity resting on an elastic foundation

Adair, D., Ibrayev, A., Kim, J. R. & Jaeger, M., Jan 1 2019, Proceedings of the 26th International Congress on Sound and Vibration, ICSV 2019. Canadian Acoustical Association, (Proceedings of the 26th International Congress on Sound and Vibration, ICSV 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Application of the Adomian modified decomposition method for a beam with a single section discontinuity resting on an elastic foundation

Adair, D., Ibrayev, A., Kim, J. R. & Jaeger, M., Jan 1 2019, Proceedings of the 26th International Congress on Sound and Vibration, ICSV 2019. Canadian Acoustical Association, (Proceedings of the 26th International Congress on Sound and Vibration, ICSV 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Assistive electro discharge machining of ain ceramics

Sarsen, A., Bilal, A., Ravi Sankar, M., Talamona, D. & Perveen, A., Jan 1 2019, Nano Engineering and Materials Technologies III. Umemura, K. (ed.). Trans Tech Publications, p. 109-113 5 p. (Materials Science Forum; vol. 947 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Audio-based Smart White Cane for Visually Impaired People

Zhangaskanov, D., Zhumatay, N. & Ali, M. H., Apr 2019, 2019 5th International Conference on Control, Automation and Robotics, ICCAR 2019. Institute of Electrical and Electronics Engineers Inc., p. 889-893 5 p. 8813508. (2019 5th International Conference on Control, Automation and Robotics, ICCAR 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Composite materials property determination by Rule of Mixture and Monte Carlo Simulation

Yerbolat, G., Amangeldi, S., Ali, M. H., Badanova, N., Ashirbeok, A. & Islam, G., Jan 16 2019, Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018. Meen, T-H. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 384-387 4 p. 8615034. (Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Development of an autonomous cupcake machine

Polichshuk, R., Khamzin, S., Mussin, K. & Ali, M. H., Feb 12 2019, 2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018. Institute of Electrical and Electronics Engineers Inc., p. 399-404 6 p. 8641035. (2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of trends and methodologies for shaping ceramics by electrical discharge machining: A review

Rashid, A., Jahan, M. P., Perveen, A. & Ma, J., Jan 1 2019, Advanced Manufacturing. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2A-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Efficient calculation of hingeless rotor blade flap-lag-torsion dynamics for helicopters

Adair, D. & Jaeger, M., Jan 1 2019, AIAA Scitech 2019 Forum. American Institute of Aeronautics and Astronautics Inc, AIAA, (AIAA Scitech 2019 Forum).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Industry perspective of engineering competencies in different socio-economic contexts - A comparative study from Kuwait and Kazakhstan

Jaeger, M. & Adair, D., Apr 1 2019, Proceedings of 2019 IEEE Global Engineering Education Conference, EDUCON 2019. Ashmawy, A. K. & Schreiter, S. (eds.). IEEE Computer Society, p. 166-172 7 p. 8725083. (IEEE Global Engineering Education Conference, EDUCON; vol. April-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Integral Sliding Mode Controller Design for Permanent Magnet Synchronous Machines

Suleimenov, K., Hazrat Ali, M. & Duc Do, T., Jul 2019, Proceedings of 2019 International Conference on System Science and Engineering, ICSSE 2019. Institute of Electrical and Electronics Engineers Inc., p. 537-542 6 p. 8823325. (Proceedings of 2019 International Conference on System Science and Engineering, ICSSE 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Investigation of the Optic Nerve Head Morphology Influence to the Optic Nerve Head Biomechanics -Patient Specific Model

Satekenova, E., Ko, M. W. L. & Kim, J. R., Jul 2019, 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2019. Institute of Electrical and Electronics Engineers Inc., p. 5370-5373 4 p. 8856743. (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of the Optic Nerve Head Morphology Influence to the Optic Nerve Head Biomechanics -Population Specific Model

Ko, M. W. L., Lai, C. C. C., Ng, P. C. K., Chow, B. H. Y., Woo, M. J. S., Yim, K. H. C. & Kim, J. R., Jul 2019, 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2019. Institute of Electrical and Electronics Engineers Inc., p. 5374-5377 4 p. 8856300. (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lattice Boltzmann modelling of contact angle and hysteresis under homogeneous and heterogeneous dynamic wetting regime

Zhumatay, N., Dauyeshova, B., Adair, D., Rojas-Solorzano, L. & Monaco, E., Jan 1 2019, Fluids Engineering. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Material Optimization Method in 3D Printing

Ali, M. H., Yerbolat, G. & Amangeldi, S., Jan 16 2019, Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018. Meen, T-H. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 365-368 4 p. 8614886. (Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mechanical property prediction method based on multi-material 3D printer

Yerbolat, G., Shynggys, A. & Ali, M. H., Feb 12 2019, 2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018. Institute of Electrical and Electronics Engineers Inc., p. 498-502 5 p. 8641073. (2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Parking gate control based on mobile application

Kasym, K., Sarsenen, A., Segizbayev, Z., Junuskaliyeva, D. & Ali, M. H., Feb 12 2019, 2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018. Institute of Electrical and Electronics Engineers Inc., p. 399-402 4 p. 8640954. (2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Probabilistic method for estimation of spinning reserves in multi-connected power systems with Bayesian network-based rescheduling algorithm

Bapin, Y. & Zarikas, V., 2019, ICAART 2019 - Proceedings of the 11th International Conference on Agents and Artificial Intelligence. Rocha, A., Steels, L. & van den Herik, J. (eds.). SciTePress, p. 840-849 10 p. (ICAART 2019 - Proceedings of the 11th International Conference on Agents and Artificial Intelligence; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
3 Citations (Scopus)

Process teaching simulator: Trial and error, thinking, learning effectiveness

Jaeger, M. & Adair, D., Apr 1 2019, Proceedings of 2019 IEEE Global Engineering Education Conference, EDUCON 2019. Ashmawy, A. K. & Schreiter, S. (eds.). IEEE Computer Society, p. 160-165 6 p. 8725190. (IEEE Global Engineering Education Conference, EDUCON; vol. April-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Simulation of viscous fingering in microchannels with hybrid-patterned surface using lattice Boltzmann method

Tursynkhan, M., Dauyeshova, B., Adair, D., Monaco, E. & Rojas-Solórzano, L., Jan 1 2019, Fluids Engineering. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2018

Comparative micro-EDM studies on Ni based X-alloy using coated and uncoated tools

Perveen, A. & Jahan, M. P., Jan 1 2018, Manufacturing Sciences and Technologies VIII - 8th ICMST 2017. Debnath, S. (ed.). Trans Tech Publications, p. 13-19 7 p. (Materials Science Forum; vol. 911 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of a network-based autonomous firefighting robot

Ali, M. H., Shamishev, S. & Aitmaganbayev, A., Jan 1 2018, ICINCO 2018 - Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics. Madani, K. & Gusikhin, O. (eds.). SciTePress, p. 525-533 9 p. (ICINCO 2018 - Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of a robot for boiler tube inspection

Ali, M. H., Zharakhmet, T., Atykhan, M., Yerbolat, A. & Batai, S., Jan 1 2018, ICINCO 2018 - Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics. Madani, K. & Gusikhin, O. (eds.). SciTePress, p. 534-541 8 p. (ICINCO 2018 - Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Finite element modelling for the detection of breast tumor

Mukhmetov, O., Igali, D., Zhao, Y., Fok, S. C., Teh, S. L., Mashekova, A. & Kwee, N. Y., Dec 6 2018, Proceedings - 2018 IEEE 18th International Conference on Bioinformatics and Bioengineering, BIBE 2018. Institute of Electrical and Electronics Engineers Inc., p. 360-363 4 p. 8567517. (Proceedings - 2018 IEEE 18th International Conference on Bioinformatics and Bioengineering, BIBE 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flexibility in upper limb rehabilitation with the use of 1-DOF fourbar linkages

Kurrnashev, S., Ospanov, S., Malik, A., Xydas, E. & Mueller, A., 2018, 42nd Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5A-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Illumination Improvement in a Commercial Building in Coimbatore, India

Lopez, L. F., Saji, S., Usmonova, S., Velasquez, S. & Rojas Solorzano, L., Aug 27 2018, 2018 3rd International Conference on Smart and Sustainable Technologies, SpliTech 2018. Rodrigues, J. J. P. C., Nizetic, S., Patrono, L., Rodrigues, J. J. P. C., Solic, P., Perkovic, T., Vukojevic, K. & Milanovic, Z. (eds.). Institute of Electrical and Electronics Engineers Inc., 8448346. (2018 3rd International Conference on Smart and Sustainable Technologies, SpliTech 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Impact of PBL on engineering students' motivation in the GCC region: Case study

Jaeger, M. & Adair, D., Jun 8 2018, 2018 Advances in Science and Engineering Technology International Conferences, ASET 2018. Institute of Electrical and Electronics Engineers Inc., p. 1-7 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Minimally actuated four-bar linkages for upper limb rehabilitation

Xydas, E., Mueller, A. & Louca, L. S., Jan 1 2018, New Trends in Medical and Service Robots - Design, Analysis and Control. Hofbaur, M. & Husty, M. (eds.). Springer Netherlands, p. 131-146 16 p. (Mechanisms and Machine Science; vol. 48).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Technical and economic prefeasibility study of mini-hydro power plants in Venezuela. Case study: El Valle River

Trejo, V., Díaz, G. & Rojas Solorzano, L., Aug 23 2018, Exergy for A Better Environment and Improved Sustainability, Volume 2: Applications. Aloui, F. & Dincer, I. (eds.). 1 ed. Springer International Publishing, Vol. 2. p. 715-724 10 p. (Green Energy and Technology).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vibrations of an Euler-Bernoulli Nanobeam on a Winkler/Pasternak-Type Elastic Foundation

Adair, D., Segizbayev, Z., Geng, X. & Jaeger, M., Dec 3 2018, NEMS 2018 - 13th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems. Institute of Electrical and Electronics Engineers Inc., p. 181-184 4 p. 8556885

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

Design of an Automated Pepper Sorting Machine

Ali, M. H. & Mir-Nasiri, N., Jun 7 2017, 2017 3rd International Conference on Control, Automation and Robotics, ICCAR 2017. Institute of Electrical and Electronics Engineers Inc., p. 622-626 5 p. 7942772

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of Arduino glove-based autonomous car

Ruslan, T., Yerden, K. & Ali, M. H., Nov 13 2017, 2017 21st International Conference on System Theory, Control and Computing, ICSTCC 2017. Institute of Electrical and Electronics Engineers Inc., p. 212-216 5 p. 8107036

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Effect of texturing on the friction characteristic of carbide and steel material by grinding process

Perveen, A. & Feng, L., Jan 1 2017, Manufacturing Engineering and Process V. Adiguzel, O., Ming Kong, M. S. & Li, K. (eds.). Trans Tech Publications, p. 83-88 6 p. (Materials Science Forum; vol. 887 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of tool coated with conductive and non-conductive layer on micro-EDM characteristic of Ni based X alloy

Lu, M., Perveen, A. & Jahan, M. P., Jan 1 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. euspen, p. 199-200 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wave-resistance computation via CFD and IGA-BEM solvers: A comparative study

Wang, X., Chouliaras, S. P., Kaklis, P. D., Ginnis, A. A. I., Politis, C. G. & Kostas, K. V., Jan 1 2017, Proceedings of the 27th International Ocean and Polar Engineering Conference, ISOPE 2017. Springer Verlag, p. 706-712 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2016

Automated segmentation of optic nerve head for the topological assessment

Ko, M. W. L., Leung, C. K. S. & Yuen, T. Y. P., Jul 5 2016, 2016 Global Medical Engineering Physics Exchanges/Pan American Health Care Exchanges, GMEPE/PAHCE 2016. Institute of Electrical and Electronics Engineers Inc., 7504611. (2016 Global Medical Engineering Physics Exchanges/Pan American Health Care Exchanges, GMEPE/PAHCE 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Camera based monitoring system for deep hole measurement

Ali, M. H. & Katsuki, A., Jan 18 2016, IEEM 2015 - 2015 IEEE International Conference on Industrial Engineering and Engineering Management. IEEE Computer Society, Vol. 2016-January. p. 109-114 6 p. 7385618. (IEEE International Conference on Industrial Engineering and Engineering Management; vol. 2016-January).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of links’ center of gravity position on the performance of a four-bar linkage as an upper limb rehabilitation mechanism: A parametric study

Xydas, E., Herodotou, P., Louca, L. S. & Mueller, A., Jan 1 2016, XIV Mediterranean Conference on Medical and Biological Engineering and Computing, MEDICON 2016. Kyriacou, E., Christofides, S. & Pattichis, C. S. (eds.). Springer Verlag, p. 590-595 6 p. (IFMBE Proceedings; vol. 57).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Ground-source heat pump cooling systems in temperate cities. Case study: Mexico City

Gómez-Campos, A., Hardikar, P. A., Prabandani, M. N., Osorio-Silva, A. F. & Rojas-Solórzano, L., 2016, IET Conference Publications. CP688 ed. Institution of Engineering and Technology, (IET Conference Publications; vol. 2016, no. CP688).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ice resistant structure optimisation of the steel conductor supported wellhead platform in the caspian sea

Tleshev, M., Spitas, C. & Kim, J., Jan 1 2016, Arctic Technology Conference 2016. Offshore Technology Conference

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Propeller wing aerodynamic interference for small UAVs during VSTOL

Adair, D. & Alimaganbetov, M., 2016, IACAS 2016 - 56th Israel Annual Conference on Aerospace Sciences. Israel Annual Conference on Aerospace Sciences

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Review design of concrete structures: Evaluating learning effectiveness

Jaeger, M., Al-Mughrabi, A., Reda, M. & Adair, D., May 19 2016, Proceedings of 2016 IEEE Global Engineering Education Conference, EDUCON 2016: "Smart Education in Smart Cities". IEEE Computer Society, Vol. 10-13-April-2016. p. 87-92 6 p. 7474536

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Simulations of fluid-structure interaction of a wind turbine

Zheng, S., Chua, L. P. & Zhao, Y., Jan 1 2016, Fluid-Structure-Sound Interactions and Control - Proceedings of the 3rd Symposium on Fluid-Structure-Sound Interactions and Control. Lucey, A. D., Liu, Y., Huang, L. & Zhou, Y. (eds.). Springer Heidelberg, p. 407-413 7 p. (Lecture Notes in Mechanical Engineering; vol. Part F3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
2015

Automated secure room system

Ali, M. H., Kamaruzaman, F., Rahman, M. A. & Shafie, A. A., Nov 20 2015, 2015 4th International Conference on Software Engineering and Computer Systems, ICSECS 2015: Virtuous Software Solutions for Big Data. Zain, J. M., Majid, M. A., Ameedeen, M. A., Arshah, R. A., Azmi, Z. R. M. & Mustaffa, Z. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 73-78 6 p. 7333086. (2015 4th International Conference on Software Engineering and Computer Systems, ICSECS 2015: Virtuous Software Solutions for Big Data).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Development of a laser-guided deep small-sized hole-measurement system: Measurement accuracy

Katsuki, A., Sajima, T., Murakami, H., Hazrat, A. M., Ohnishi, O. & Akashi, K., Jan 1 2015, Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015. Leach, R. (ed.). euspen, p. 201-202 2 p. (Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modeling of vertical micro grinding

Perveen, A., Rahman, M. & Wong, Y. S., Jan 1 2015, Precision Engineering and Nanotechnology V. Trans Tech Publications, p. 463-468 6 p. (Key Engineering Materials; vol. 625).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Risk analysis with reference class forecasting adopting tolerance regions

Zarikas, V. & Kitsos, C. P., Jan 1 2015, Theory and Practice of Risk Assessment - ICRA5 2013. Rigas, A., Kitsos, C. P., Gulati, S. & Oliveira, T. A. (eds.). Springer New York, p. 235-247 13 p. (Springer Proceedings in Mathematics and Statistics; vol. 136).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)