Department of Mechanical and Aerospace Engineering

Research Output 1999 2019

Filter
Conference contribution
Conference contribution

A new algorithm to control dynamic stability of higher-order systems

Mir-Nasiri, N. & Ali, M. H., Apr 8 2019, Proceedings - 8th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2018. Institute of Electrical and Electronics Engineers Inc., p. 53-58 6 p. 8684988. (Proceedings - 8th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Higher Order
Dynamic Systems
Dynamical systems
Characteristic polynomial
Coefficient

Application of the Adomian modified decomposition method for a beam with a single section discontinuity resting on an elastic foundation

Adair, D., Ibrayev, A., Kim, J. R. & Jaeger, M., Jan 1 2019, Proceedings of the 26th International Congress on Sound and Vibration, ICSV 2019. Canadian Acoustical Association, (Proceedings of the 26th International Congress on Sound and Vibration, ICSV 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

discontinuity
decomposition
Euler-Bernoulli beams
modal response
free vibration

Assistive electro discharge machining of ain ceramics

Sarsen, A., Bilal, A., Ravi Sankar, M., Talamona, D. & Perveen, A., Jan 1 2019, Nano Engineering and Materials Technologies III. Umemura, K. (ed.). Trans Tech Publications, p. 109-113 5 p. (Materials Science Forum; vol. 947 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric discharge machining
machining
Silver
ceramics
coatings

Audio-based Smart White Cane for Visually Impaired People

Zhangaskanov, D., Zhumatay, N. & Ali, M. H., Apr 2019, 2019 5th International Conference on Control, Automation and Robotics, ICCAR 2019. Institute of Electrical and Electronics Engineers Inc., p. 889-893 5 p. 8813508. (2019 5th International Conference on Control, Automation and Robotics, ICCAR 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrasonic sensors
Visually Impaired
Obstacle Detection
Digital control systems
Sensor

Camera based monitoring system for deep hole measurement

Ali, M. H. & Katsuki, A., Jan 18 2016, IEEM 2015 - 2015 IEEE International Conference on Industrial Engineering and Engineering Management. IEEE Computer Society, Vol. 2016-January. p. 109-114 6 p. 7385618

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cameras
Monitoring
Units of measurement
Security systems
Monitoring system

Comparative micro-EDM studies on Ni based X-alloy using coated and uncoated tools

Perveen, A. & Jahan, M. P., Jan 1 2018, Manufacturing Sciences and Technologies VIII - 8th ICMST 2017. Debnath, S. (ed.). Trans Tech Publications, p. 13-19 7 p. (Materials Science Forum; vol. 911 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

machining
Machining
craters
energy
aerospace industry
1 Citation (Scopus)

Composite materials property determination by Rule of Mixture and Monte Carlo Simulation

Yerbolat, G., Amangeldi, S., Ali, M. H., Badanova, N., Ashirbeok, A. & Islam, G., Jan 16 2019, Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018. Meen, T-H. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 384-387 4 p. 8615034. (Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Materials properties
3D printers
simulation
Composite materials
Printing

Design of an Automated Pepper Sorting Machine

Ali, M. H. & Mir-Nasiri, N., Jun 7 2017, 2017 3rd International Conference on Control, Automation and Robotics, ICCAR 2017. Institute of Electrical and Electronics Engineers Inc., p. 622-626 5 p. 7942772

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sorting
Suction
Gantry cranes
Pulleys
Microcontroller

Design of loboid gear pairs using involute discretization

Spitas, V. & Spitas, C., Jan 1 2013, Power Transmissions - Proceedings of the 4th International Conference. Dobre, G. (ed.). Springer Netherlands, p. 417-425 9 p. (Mechanisms and Machine Science; vol. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Gear teeth
Rotary pumps
Blowers
Pneumatics

Development of an autonomous cupcake machine

Polichshuk, R., Khamzin, S., Mussin, K. & Ali, M. H., Feb 12 2019, 2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018. Institute of Electrical and Electronics Engineers Inc., p. 399-404 6 p. 8641035. (2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Customer Satisfaction
Microcontroller
Customer satisfaction
Production Systems
Microcontrollers

Development of a network-based autonomous firefighting robot

Ali, M. H., Shamishev, S. & Aitmaganbayev, A., Jan 1 2018, ICINCO 2018 - Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics. Gusikhin, O. & Madani, K. (eds.). SciTePress, p. 525-533 9 p. (ICINCO 2018 - Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fires
Robots
Spray guns
Washers
Collision avoidance
5 Citations (Scopus)

Development of Arduino glove-based autonomous car

Ruslan, T., Yerden, K. & Ali, M. H., Nov 13 2017, 2017 21st International Conference on System Theory, Control and Computing, ICSTCC 2017. Institute of Electrical and Electronics Engineers Inc., p. 212-216 5 p. 8107036

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Railroad cars
Sensor
Sensors
Human computer interaction
Costs

Development of a robot for boiler tube inspection

Ali, M. H., Zharakhmet, T., Atykhan, M., Yerbolat, A. & Batai, S., Jan 1 2018, ICINCO 2018 - Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics. Gusikhin, O. & Madani, K. (eds.). SciTePress, p. 534-541 8 p. (ICINCO 2018 - Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Boilers
Inspection
Robots
Fans
Ultrasonic sensors
1 Citation (Scopus)

Dynamical simulation and calculation of the load factor of spur gears with indexing errors and profile modifications for optimal gear design

Spitas, C., Spitas, V. & Rajabalinejad, M., Jan 1 2013, Power Transmissions - Proceedings of the 4th International Conference. Dobre, G. (ed.). Springer Netherlands, p. 183-196 14 p. (Mechanisms and Machine Science; vol. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Spur gears
Gears
Gear teeth
Geometry

Effect of texturing on the friction characteristic of carbide and steel material by grinding process

Perveen, A. & Feng, L., 2017, Manufacturing Engineering and Process V. Trans Tech Publications, Vol. 887 MSF. p. 83-88 6 p. (Materials Science Forum; vol. 887 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Texturing
Steel
grinding
carbides
Carbides

Effect of tool coated with conductive and non-conductive layer on micro-EDM characteristic of Ni based X alloy

Lu, M., Perveen, A. & Jahan, M. P., Jan 1 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. euspen, p. 199-200 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

machining
Machining
coatings
Coatings
Wear of materials

Efficient calculation of hingeless rotor blade flap-lag-torsion dynamics for helicopters

Adair, D. & Jaeger, M., Jan 1 2019, AIAA Scitech 2019 Forum. American Institute of Aeronautics and Astronautics Inc, AIAA, (AIAA Scitech 2019 Forum).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flaps
Ordinary differential equations
Helicopters
Torsional stress
Dynamic analysis

Emission fluxes of different metals in aerosol emitted during frying-effect of frying pan

Torkmahalleh, M., Zhao, Y., Goldasteh, I., Rossner, A., Hopke, P. K. & Ferro, A. R., 2013, Conference Environment and Health – Bridging South, North, East and West. Basel, Switzerland

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Exposure to different commercial oils

Torkmahalleh, M., Goldasteh, I., Zhao, Y., Rossner, A., Hopke, P. K. & Ferro, A. R., 2010, AAAR 29th Annual Conference. Portland, OR, USA

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fault tolerant control of electromagnetic suspension system with simultaneous sensor and actuator faults

Alizadeh, T. & Barzegari, S., Sep 8 2015, 2015 10th Asian Control Conference: Emerging Control Techniques for a Sustainable World, ASCC 2015. Institute of Electrical and Electronics Engineers Inc., 7244711

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Actuators
Sensors
Magnets
Controllers

Finite element modelling for the detection of breast tumor

Mukhmetov, O., Igali, D., Zhao, Y., Fok, S. C., Teh, S. L., Mashekova, A. & Kwee, N. Y., Dec 6 2018, Proceedings - 2018 IEEE 18th International Conference on Bioinformatics and Bioengineering, BIBE 2018. Institute of Electrical and Electronics Engineers Inc., p. 360-363 4 p. 8567517

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tumors
Breast
Breast Neoplasms
Hot Temperature
Finite element method

Flexibility in upper limb rehabilitation with the use of 1-DOF fourbar linkages

Kurrnashev, S., Ospanov, S., Malik, A., Xydas, E. & Mueller, A., Jan 1 2018, 42nd Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), Vol. 5A-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rehabilitation
Degrees of freedom (mechanics)
Patient rehabilitation
Linkage
Kinematics

Ice resistant structure optimisation of the steel conductor supported wellhead platform in the caspian sea

Tleshev, M., Spitas, C. & Kim, J., Jan 1 2016, Arctic Technology Conference 2016. Offshore Technology Conference

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wellheads
Steel
wellhead
Ice
steel

Illumination Improvement in a Commercial Building in Coimbatore, India

Lopez, L. F., Saji, S., Usmonova, S., Velasquez, S. & Rojas Solorzano, L., Aug 27 2018, 2018 3rd International Conference on Smart and Sustainable Technologies, SpliTech 2018. Rodrigues, J. J. P. C., Nizetic, S., Patrono, L., Rodrigues, J. J. P. C., Solic, P., Perkovic, T., Vukojevic, K. & Milanovic, Z. (eds.). Institute of Electrical and Electronics Engineers Inc., 8448346

Research output: Chapter in Book/Report/Conference proceedingConference contribution

India
Illumination
Lighting
Incandescent lamps
Fluorescent lamps
1 Citation (Scopus)

Impact of PBL on engineering students' motivation in the GCC region: Case study

Jaeger, M. & Adair, D., Jun 8 2018, 2018 Advances in Science and Engineering Technology International Conferences, ASET 2018. Institute of Electrical and Electronics Engineers Inc., p. 1-7 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

student
Students
engineering
learning
self determination

Industry perspective of engineering competencies in different socio-economic contexts - A comparative study from Kuwait and Kazakhstan

Jaeger, M. & Adair, D., Apr 1 2019, Proceedings of 2019 IEEE Global Engineering Education Conference, EDUCON 2019. Ashmawy, A. K. & Schreiter, S. (eds.). IEEE Computer Society, p. 166-172 7 p. 8725083. (IEEE Global Engineering Education Conference, EDUCON; vol. April-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kuwait
Kazakhstan
engineering
Economics
industry

Influence of food surface area on PM2.5 and particle number concentration during frying

Torkmahalleh, M., Zhao, Y., Goldasteh, I., Rossner, A., Hopke, P. K. & Ferro, A. R., 2013, European Aerosol Conference. Prague, Czech Republic

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Integral Sliding Mode Controller Design for Permanent Magnet Synchronous Machines

Suleimenov, K., Hazrat Ali, M. & Duc Do, T., Jul 2019, Proceedings of 2019 International Conference on System Science and Engineering, ICSSE 2019. Institute of Electrical and Electronics Engineers Inc., p. 537-542 6 p. 8823325. (Proceedings of 2019 International Conference on System Science and Engineering, ICSSE 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Synchronous Machine
Permanent Magnet
Sliding Mode
Controller Design
Permanent magnets
3 Citations (Scopus)

Lean manufacturing for SMEs: Enabling rapid response to demand changes

Achanga, P., Shehab, E., Roy, R. & Nelder, G., Dec 1 2005, Proceedings ICED 05, the 15th International Conference on Engineering Design. Vol. DS 35.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lean production

Material Optimization Method in 3D Printing

Ali, M. H., Yerbolat, G. & Amangeldi, S., Jan 16 2019, Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018. Meen, T-H. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 365-368 4 p. 8614886. (Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Printing
Materials properties
mechanical property
material
method
1 Citation (Scopus)

Mechanical property prediction method based on multi-material 3D printer

Yerbolat, G., Shynggys, A. & Ali, M. H., Feb 12 2019, 2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018. Institute of Electrical and Electronics Engineers Inc., p. 498-502 5 p. 8641073. (2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Mechanical Properties
Printing
Mechanical properties
Prediction
2 Citations (Scopus)

Minimally actuated four-bar linkages for upper limb rehabilitation

Xydas, E., Mueller, A. & Louca, L. S., Jan 1 2018, New Trends in Medical and Service Robots - Design, Analysis and Control. Hofbaur, M. & Husty, M. (eds.). Springer Netherlands, p. 131-146 16 p. (Mechanisms and Machine Science; vol. 48).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Patient rehabilitation
Kinematics
Trajectories
Robots
Degrees of freedom (mechanics)

Parking gate control based on mobile application

Kasym, K., Sarsenen, A., Segizbayev, Z., Junuskaliyeva, D. & Ali, M. H., Feb 12 2019, 2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018. Institute of Electrical and Electronics Engineers Inc., p. 399-402 4 p. 8640954. (2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mobile Applications
Parking
Application programs
Bluetooth
Mobile phones

Physical Characteristics of Particle Emission from Multiple Cooking Activities

Zhao, Y., Torkmahalleh, M., Goldasteh, I., Rossner, A., Hopke, P. K. & Ferro, A. R., 2012, AAAR 31st Annual Conference. Minneapolis, Minnesota, USA

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Probabilistic method for estimation of spinning reserves in multi-connected power systems with Bayesian network-based rescheduling algorithm

Bapin, Y. & Zarikas, V., Jan 1 2019, ICAART 2019 - Proceedings of the 11th International Conference on Agents and Artificial Intelligence. Steels, L., Rocha, A. & van den Herik, J. (eds.). SciTePress, p. 840-849 10 p. (ICAART 2019 - Proceedings of the 11th International Conference on Agents and Artificial Intelligence; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bayesian networks
Outages
Costs

Process teaching simulator: Trial and error, thinking, learning effectiveness

Jaeger, M. & Adair, D., Apr 1 2019, Proceedings of 2019 IEEE Global Engineering Education Conference, EDUCON 2019. Ashmawy, A. K. & Schreiter, S. (eds.). IEEE Computer Society, p. 160-165 6 p. 8725190. (IEEE Global Engineering Education Conference, EDUCON; vol. April-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Teaching
Simulators
Feedback
Students
learning

Propeller wing aerodynamic interference for small UAVs during VSTOL

Adair, D. & Alimaganbetov, M., 2016, IACAS 2016 - 56th Israel Annual Conference on Aerospace Sciences. Israel Annual Conference on Aerospace Sciences

Research output: Chapter in Book/Report/Conference proceedingConference contribution

aerodynamic interference
propellers
Propellers
Unmanned aerial vehicles (UAV)
pilotless aircraft
1 Citation (Scopus)

Review design of concrete structures: Evaluating learning effectiveness

Jaeger, M., Al-Mughrabi, A., Reda, M. & Adair, D., May 19 2016, Proceedings of 2016 IEEE Global Engineering Education Conference, EDUCON 2016: "Smart Education in Smart Cities". IEEE Computer Society, Vol. 10-13-April-2016. p. 87-92 6 p. 7474536

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Concrete construction
Students
learning
Group theory
Statistical tests
2 Citations (Scopus)

Simulations of fluid-structure interaction of a wind turbine

Zheng, S., Chua, L. P. & Zhao, Y., Jan 1 2016, Fluid-Structure-Sound Interactions and Control - Proceedings of the 3rd Symposium on Fluid-Structure-Sound Interactions and Control. Lucey, A. D., Liu, Y., Huang, L. & Zhou, Y. (eds.). Springer Heidelberg, p. 407-413 7 p. (Lecture Notes in Mechanical Engineering; vol. Part F3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fluid structure interaction
Wind turbines
Flow fields
Turbomachine blades
Momentum

Technical and economic prefeasibility study of mini-hydro power plants in Venezuela. Case study: El Valle River

Trejo, V., Díaz, G. & Rojas Solorzano, L., Aug 23 2018, Exergy for A Better Environment and Improved Sustainability, Volume 2: Applications. Aloui, F. & Dincer, I. (eds.). 1 ed. Springer International Publishing, Vol. 2. p. 715-724 10 p. (Green Energy and Technology).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

power plant
economics
river
hydroelectric power plant
energetics
26 Citations (Scopus)

Thermal management of mobile phone using phase change material

Tan, F. L. & Fok, S. C., 2007, 9th Electronics Packaging Technology Conference, EPTC 2007. IEEE, p. 836-842 7 p. 4469773. (2007 9th Electronics Packaging Technology Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Phase change materials
Mobile phones
Temperature control
Heat storage
Latent heat

Towards optimum involute gear design by combining addendum and thickness modifications

Spitas, V. & Spitas, C., Jan 1 2013, Power Transmissions - Proceedings of the 4th International Conference. Dobre, G. (ed.). Springer Netherlands, p. 173-181 9 p. (Mechanisms and Machine Science; vol. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Gear teeth
Photoelasticity
Cutting tools
Pitting
1 Citation (Scopus)

Transient two-phase-flow model for predicting column formation in intermittent gas lift systems

Sandoval, S., Rojas Solorzano, L. & Gasbarri, S., Jan 1 2005, Society of Petroleum Engineers - SPE Latin American and Caribbean Petroleum Engineering Conference 2005, LACPEC 2005. Society of Petroleum Engineers (SPE), Vol. 2005-June.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gas lifts
Two phase flow
Fluids
Multiphase flow
Distillation columns

Verification and validation of computational fluid dynamics simulations of compound channel flow

Filonovich, M. S., Azevedo, R., Rojas, L. & Leal, J. B., Jan 1 2011, 34th IAHR Congress 2011 - Balance and Uncertainty: Water in a Changing World, Incorporating the 33rd Hydrology and Water Resources Symposium and the 10th Conference on Hydraulics in Water Engineering. International Association for Hydro-Environment Engineering and Research (IAHR), p. 4430-4437 8 p. (34th IAHR Congress 2011 - Balance and Uncertainty: Water in a Changing World, Incorporating the 33rd Hydrology and Water Resources Symposium and the 10th Conference on Hydraulics in Water Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

channel flow
Channel flow
computational fluid dynamics
Computational fluid dynamics
Computer simulation

Vibrations of an Euler-Bernoulli Nanobeam on a Winkler/Pasternak-Type Elastic Foundation

Adair, D., Segizbayev, Z., Geng, X. & Jaeger, M., Dec 3 2018, NEMS 2018 - 13th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems. Institute of Electrical and Electronics Engineers Inc., p. 181-184 4 p. 8556885

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nonlinear equations
Stretching
Equations of motion
Boundary conditions
Decomposition

Wave-resistance computation via CFD and IGA-BEM solvers: A comparative study

Wang, X., Chouliaras, S. P., Kaklis, P. D., Ginnis, A. A. I., Politis, C. G. & Kostas, K. V., Jan 1 2017, Proceedings of the 27th International Ocean and Polar Engineering Conference, ISOPE 2017. Springer Verlag, p. 706-712 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Computer aided design
Computational fluid dynamics
Ships
Turbulence models
Splines