Nazarbayev University

  • Kazakhstan

  • Kazakhstan

Research Output 1975 2020

2020
1 Citation (Scopus)

Idealized Sine Wave Approach to Determine Arrival Times of Shear Wave Signals Using Bender Elements

Khan, Q., Moon, S-W. & Ku, T., Jan 2020, In : Geotechnical Testing Journal. 43, 1, 20170121.

Research output: Contribution to journalArticle

Shear waves
arrival time
S-wave
Soils
Travel time

Image Analysis of Quantification Method on Salt Precipitation for Formation Damage Optimization

Ahmad Fadhil Jahari & Siti Rohaida Mohd Shafian, 2020, (Submitted) International Conference on Oil & Gas Engineering and Technology 2020 (ICOGET2020) .

Research output: Chapter in Book/Report/Conference proceedingConference contribution

image analysis
salt
damage
enhanced oil recovery
transport process

Impedimetric detection of Pseudomonas aeruginosa attachment on flexible ITO-coated polyethylene terephthalate substrates

Bharatula, L. D., Marsili, E. & Kwan, J. J., Feb 1 2020, In : Electrochimica Acta. 332, 135390.

Research output: Contribution to journalArticle

Polyethylene Terephthalates
Biofilms
Polyethylene terephthalates
Electrochemical impedance spectroscopy
Substrates

Improving the efficiency of an exhaust thermoelectric generator based on changes in the baffle distribution of the heat exchanger

Sheikh, R., Gholampour, S., Fallahsohi, H., Goodarzi, M., Mohammad Taheri, M. & Bagheri, M., Jan 1 2020, (Accepted/In press) In : Journal of Thermal Analysis and Calorimetry.

Research output: Contribution to journalArticle

thermoelectric generators
baffles
heat exchangers
Heat exchangers
electric power

Internationalization as a Mechanism of Higher Education Modernization in Kazakhstan

Kuzhabekova, A., 2020, (Accepted/In press) Handbook of Internationalization of Higher Education in Asia and the Pacific.

Research output: Chapter in Book/Report/Conference proceedingChapter (peer-reviewed)

Introduction to neuro-memristive systems

James Pappachen, A., Jan 1 2020, Modeling and Optimization in Science and Technologies. Springer Verlag, p. 3-12 10 p. (Modeling and Optimization in Science and Technologies; vol. 14).

Research output: Chapter in Book/Report/Conference proceedingChapter

Memristors
Hardware
Equipment and Supplies
Computing
Availability

Ismailism in Badakhshan: A Genealogical History

Beben, D., Gross, J-A. & Mamadsherzodshoev, U., 2020, (In preparation)

Research output: Book/ReportBook

Learning algorithms and implementation

Krestinskaya, O. & James Pappachen, A., Jan 1 2020, Modeling and Optimization in Science and Technologies. Springer Verlag, p. 91-102 12 p. (Modeling and Optimization in Science and Technologies; vol. 14).

Research output: Chapter in Book/Report/Conference proceedingChapter

Learning algorithms
Learning Algorithm
Learning
Hardware
Memristors

Maximizing Well Productivity With Meso Surfactant Based Filter Cake Breaker In Synthetic Based Mud Drill In Fluid

Totok R Biyanto, 2020, (Submitted) SPE Annual Technical Conference and Exhibition .

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface active agents
Sand
Productivity
Fluids
Barite

Maximum torsional reinforcement ratio of reinforced concrete beams

Ju, H., Lee, D., Kim, J. R. & Kim, K. S., Feb 2020, In : Structures. 23, p. 481-493 13 p.

Research output: Contribution to journalArticle

Open Access
Reinforced concrete
Reinforcement
Torsional stress
Concretes
Failure modes

Memristive deep convolutional neural networks

Krestinskaya, O. & James Pappachen, A., Jan 1 2020, Modeling and Optimization in Science and Technologies. Springer Verlag, p. 131-137 7 p. (Modeling and Optimization in Science and Technologies; vol. 14).

Research output: Chapter in Book/Report/Conference proceedingChapter

Learning
Neural Networks
Neural networks
Cover
Deep neural networks

Memristive hierarchical temporal memory

Krestinskaya, O., Dolzhikova, I. & James Pappachen, A., Jan 1 2020, Modeling and Optimization in Science and Technologies. Springer Verlag, p. 181-194 14 p. (Modeling and Optimization in Science and Technologies; vol. 14).

Research output: Chapter in Book/Report/Conference proceedingChapter

Nearest Neighbor Method
Feature Extraction
Feature extraction
Encoding
Hardware

Memristive LSTM architectures

Adam, K., Smagulova, K. & James Pappachen, A., Jan 1 2020, Modeling and Optimization in Science and Technologies. Springer Verlag, p. 155-167 13 p. (Modeling and Optimization in Science and Technologies; vol. 14).

Research output: Chapter in Book/Report/Conference proceedingChapter

Analog circuits
Libraries
Hardware
Analog Circuits
Architecture

Memristive threshold logic networks

Dolzhikova, I., Kumar Maan, A. & James Pappachen, A., Jan 1 2020, Modeling and Optimization in Science and Technologies. Springer Verlag, p. 117-130 14 p. (Modeling and Optimization in Science and Technologies; vol. 14).

Research output: Chapter in Book/Report/Conference proceedingChapter

Threshold logic
Logic circuits
Logic
Memristors
Memory architecture

Memristors: Properties, models, materials

Krestinskaya, O., Irmanova, A. & James Pappachen, A., Jan 1 2020, Modeling and Optimization in Science and Technologies. Springer Verlag, p. 13-40 28 p. (Modeling and Optimization in Science and Technologies; vol. 14).

Research output: Chapter in Book/Report/Conference proceedingChapter

Memristors
Equipment and Supplies
Network architecture
Process Variation
Model

Monoethanolamine based DESs for CO2 absorption: Insights from molecular dynamics simulations

Kussainova, D. & Shah, D., Jan 16 2020, In : Separation and Purification Technology. 231, 115931.

Research output: Contribution to journalArticle

Ethanolamine
Eutectics
Molecular dynamics
Computer simulation
Amines

Multicultural Citizenship : 25 Yars Later

Caron, J-F. & Boucher, F., Sep 1 2020, (In preparation)

Research output: Book/ReportScholarly edition

Multi-level memristive memory for neural networks

Irmanova, A., Myrzakhmet, S. & James Pappachen, A., Jan 1 2020, Modeling and Optimization in Science and Technologies. Springer Verlag, p. 103-116 14 p. (Modeling and Optimization in Science and Technologies; vol. 14).

Research output: Chapter in Book/Report/Conference proceedingChapter

Memristors
Neural Networks
Neural networks
Data storage equipment
Equipment and Supplies

new year, old problems

Pelizzo, R., Jan 22 2020

Research output: Non-textual formWeb publication/site

Open Access

Novel nanostructured iron oxide cryogels for arsenic (As(III)) removal

Otero-González, L., Mikhalovsky, S., Václavíková, M., Trenikhin, M. V., Cundy, A. B. & Savina, I. N., Jan 5 2020, In : Journal of Hazardous Materials. 381, 120996.

Research output: Contribution to journalArticle

Cryogels
Arsenic
Iron oxides
iron oxide
arsenic

Novel silane-treated polyacrylonitrile as a promising negative electrode binder for LIBs

Umirov, N., Moon, S., Park, G., Kim, H. Y., Lee, K. J. & Kim, S. S., Jan 30 2020, In : Journal of Alloys and Compounds. 815, 152481.

Research output: Contribution to journalArticle

Silanes
Polyacrylonitriles
Binders
Electrodes
Anodes

Optimal power tracking of PMSG based wind energy conversion systems by constrained direct control with fast convergence rates

The Nguyen, H., Al-Sumaiti, A. S., Vu, V. P., Al-Durra, A. & Do, T. D., Jun 2020, In : International Journal of Electrical Power and Energy Systems. 118, 105807.

Research output: Contribution to journalArticle

Synchronous generators
Energy conversion
Wind power
Permanent magnets
Aerodynamics

Overview of long short-term memory neural networks

Smagulova, K. & James Pappachen, A., Jan 1 2020, Modeling and Optimization in Science and Technologies. Springer Verlag, p. 139-153 15 p. (Modeling and Optimization in Science and Technologies; vol. 14).

Research output: Chapter in Book/Report/Conference proceedingChapter

Long-Term Memory
Memory Term
Recurrent neural networks
Short-Term Memory
Neural Networks

Photoluminescence quenching of WS2 nanoflakes upon Ga ion irradiation

Bozheyev, F., Nemkayeva, R., Guseinov, N., Kaikanov, M. & Tikhonov, A., Jan 2020, In : Journal of Luminescence. 217, 116786.

Research output: Contribution to journalArticle

Ion bombardment
ion irradiation
Ion beams
Dosimetry
Quenching

Poly-L-arginine modifications alter the organization and secretion of collagen in SKH1-E mice

Boddupalli, A., Akilbekova, D. & Bratlie, K. M., Jan 1 2020, In : Materials Science and Engineering C. 106, 110143.

Research output: Contribution to journalArticle

Arginine
secretions
collagens
Collagen
mice

Practical configured Microtremor Array Measurements (MAM) for geological investigation of underground space

Ku, T., Subramaniam, P., Zhang, Y., Moon, S-W., Wei, X., Huang, E. S., Kumarasamy, J. & Goh, K. H., 2020, (Accepted/In press) In : Underground Space.

Research output: Contribution to journalArticle

microtremor
borehole
rock
soil
geophysical method

Prediction of drilling rate utilizing common rock properties and driller specifications: percussion drilling

Yazitova, A. & Yagiz, S., 2020, (Accepted/In press).

Research output: Contribution to conferencePaper

Preface

James Pappachen, A., Jan 1 2020, In : Modeling and Optimization in Science and Technologies. 14, p. vii

Research output: Contribution to journalEditorial

Prevalence of use and reported side effects of herbal medicine among adults in Saudi Arabia

Alkhamaisah, S. & Aljofan, M., 2020, Complementary Therapies in Medicine, 102255.

Research output: Contribution to specialist publicationArticle

Quantitative evaluation of thermal performance and energy saving potential of the building integrated with PCM in a subarctic climate

Kenzhekhanov, S., Memon, S. A. & Adilkhanova, I., Feb 1 2020, In : Energy. 192, 116607.

Research output: Contribution to journalArticle

Pulse code modulation
Energy conservation
Temperature
Energy efficiency
Melting point

Rapid synthesis of nontoxic and photostable carbon nanoparticles for bioimaging applications

Molkenova, A., Toleshova, A., Song, S. J., Kang, M. S., Abduraimova, A., Han, D. W. & Atabaev, T. S., Feb 15 2020, In : Materials Letters. 261, 127012.

Research output: Contribution to journalArticle

Carbon
Nanoparticles
nanoparticles
carbon
synthesis
civil religion
Kazakhstan
cultural heritage
national identity
symbol

Speech recognition application using deep learning neural network

Izbassarova, A., Duisembay, A. & James Pappachen, A., Jan 1 2020, Modeling and Optimization in Science and Technologies. Springer Verlag, p. 69-79 11 p. (Modeling and Optimization in Science and Technologies; vol. 14).

Research output: Chapter in Book/Report/Conference proceedingChapter

Neural Networks (Computer)
Speech Recognition
Speech recognition
Neural Network Model
Learning

Stability of Sn-Pd-Kaolinite catalyst during heat treatment and nitrate reduction in continuous flow Reaction

Golagana, S., Hamid, S., Han, S., Lee, G., Babaa, M-R. & Lee, W., 2020, In : Chemosphere. 241, p. 125115 241.

Research output: Contribution to journalArticle

Study of the transportation behavior of nanoparticles through low-porosity sand pack in the absence and presence of oil

Irawann, S., 2020, (Submitted) Nano- and Micro-Encapsulation - Techniques and Applications. Abu Thabit, N. (ed.). IntechOpen Publisher

Research output: Chapter in Book/Report/Conference proceedingChapter

Oils
Sand
Porosity
Nanoparticles
Metals

Th

Taherkermani, R., May 2020, (Accepted/In press) Edinburgh University Press. 280 p.

Research output: Book/ReportOther report

The Fight against Heaven-sent Insects: Dealing with Locust Plagues in the Emirate of Bukhara

Dagyeli, J., Feb 2020, In : Environment and History. 26, 1, p. 79-104 25 p.

Research output: Contribution to journalArticle

locust
insect
superstition
import
agricultural product

The Hungry Steppe: Famine, Violence, and the Making of Soviet Kazakhstan by Sarah Cameron (review)

Chokobaeva, A., 2020, (Accepted/In press) In : Ab Imperio.

Research output: Contribution to journalArticle

The Persian Presence in Victorian Poetry

Taherkermani, R., May 2020, Edinburgh University Press. 272 p.

Research output: Book/ReportBook

Persia
Poetry
Victorian Era
Poem
Literary Works

the state of africa: the universities

Pelizzo, R., Jan 27 2020

Research output: Non-textual formWeb publication/site

Open Access

Understanding the effect of p-, n-type dopants and vinyl carbonate electrolyte additive on electrochemical performance of Si thin film anodes for lithium-ion battery

Mukanova, A., Serikkazyyeva, A., Nurpeissova, A., Kim, S. S., Myronov, M. & Bakenov, Z., Jan 10 2020, In : Electrochimica Acta. 330, 135179.

Research output: Contribution to journalArticle

Carbonates
Silicon
Electrolytes
Anodes
Doping (additives)

Отечество для кочевников: история автономизации Киргизии

Translated title of the contribution: Fatherland for Nomads: History of the Kyrgyz AutonomyChokobaeva, A., 2020, (Submitted) Ислам в России и Евразии - Сборник статей памяти Д. Ю. Арапова. Kotiukova, T. (ed.). The Russian Academy of Sciences

Research output: Chapter in Book/Report/Conference proceedingChapter

3D Laser scanning in the mining underground in Kazakhstan

Moon, S-W., Nikitenko, S. & Koshan, Y., Aug 2019, AOGS 2019 - Asia Oceania Geosciences Society.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

laser
subsoil
surveying
cavity
dust
1 Citation (Scopus)

3D-printed poly(lactic acid) scaffolds for trabecular bone repair and regeneration: scaffold and native bone characterization

Velioglu, Z., Pulat, D., Demirbakan, B., Ozcan, B., Bayrak, E. & Erisken, C., 2019, In : Connective Tissue Research. 60, 3, p. 274-282

Research output: Contribution to journalArticle

Bone Regeneration
Mesenchymal Stromal Cells
Scaffolds
Bone
Repair
2 Citations (Scopus)

3D printing: a critical review of current development and future prospects

Ali, M. H., Batai, S. & Sarbassov, D., Jan 1 2019, In : Rapid Prototyping Journal.

Research output: Contribution to journalReview article

Printing
3D printers
Topology
Mechanical properties
Processing

4D printing: a critical review of current developments, and future prospects

Ali, M. H., Abilgaziyev, A. & Adair, D., Jan 1 2019, (Accepted/In press) In : International Journal of Advanced Manufacturing Technology.

Research output: Contribution to journalArticle

Printing
3D printers
Topology
Mechanical properties
Processing