School of Mining and Geosciences

  • Kazakhstan

Research Output

Filter
Conference contribution
2020

An RMR-based stability analysis for empirical design of underground excavation spans

Adoko, A. C. & Alipov, A., 2020, Rock Mechanics for Natural Resources and Infrastructure Development- Proceedings of the 14th International Congress on Rock Mechanics and Rock Engineering, ISRM 2019. da Fontoura, S. A. B., Rocca, R. J. & Mendoza, J. F. P. (eds.). CRC Press/Balkema, p. 671-677 7 p. (Rock Mechanics for Natural Resources and Infrastructure Development- Proceedings of the 14th International Congress on Rock Mechanics and Rock Engineering, ISRM 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

CoalBed Methane (CBM) Prospect in Tebulan Block, Sarawak- Malaysia

Irawann, S., Shafiq, N. & akbar Khan, J., 2020, (Accepted/In press) International Conference on Mining and Mineralogy (ICMM Germany 2020).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Correlations between crucial rock properties and drilling rate index for hard rock tunnels

Yagiz, S. & Yarali, O., 2020, World Tunnelling Congress, WTC2020 Malaysia. 5 p. 393

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of an Environment-Friendly Ester-based Drilling Fluid for Enhanced Rheological and Filtration Properties

Aftab Hussain Arain, Suppiah Raja Rajeswary & Aqsha, 2020, (Submitted) International Conference on Oil and Gas Engineering and Tchnology (ICOGET2020).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effective methods to reduce grade variability in iron ore mine operations

Trouchina, O. P. & Topal, E., 2020, Proceedings of the 28th International Symposium on Mine Planning and Equipment Selection, MPES 2019. Topal, E. (ed.). Springer, p. 67-74 8 p. (Springer Series in Geomechanics and Geoengineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Estimation of drilling rate of diamond driller using rock properties and driller specifications

Yazitova, A. & Yagiz, S., 2020, ISRM International Symposium - EUROCK 2020. p. 7p

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evaluation of rock brittleness indices to estimate Cerchar Abrasivity Index for disc cutter weariness

Yagiz, S., Frough, O. & Rostami, J., 2020, American Rock Mechanics and Geomechanics Symposium-ARMA2020.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Illumination of contributing parameters of uneven break in narrow vein mine

Jang, H., Taheri, S., Topal, E. & Kawamura, Y., 2020, Proceedings of the 28th International Symposium on Mine Planning and Equipment Selection, MPES 2019. Topal, E. (ed.). Springer, p. 457-466 10 p. (Springer Series in Geomechanics and Geoengineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Image Analysis of Quantification Method on Salt Precipitation for Formation Damage Optimization

Ahmad Fadhil Jahari & Siti Rohaida Mohd Shafian, 2020, (Submitted) International Conference on Oil & Gas Engineering and Technology 2020 (ICOGET2020) .

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Maximizing Well Productivity With Meso Surfactant Based Filter Cake Breaker In Synthetic Based Mud Drill In Fluid

Totok R Biyanto, 2020, (Submitted) SPE Annual Technical Conference and Exhibition .

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optimised pit scheduling including in-pit dumps for stratified deposit

Das, R., Topal, E. & Mardenah, E., 2020, Proceedings of the 28th International Symposium on Mine Planning and Equipment Selection, MPES 2019. Topal, E. (ed.). Springer, p. 33-41 9 p. (Springer Series in Geomechanics and Geoengineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Prediction of drilling rate utilizing common rock properties and driller specifications: percussion drilling

Yazitova, A. & Yagiz, S., 2020, World Tunnelling Congress, WTC2020, Malaysia. 5 p. 386

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Relationship between key rock properties and Cerchar abrasivity index for estimation of disc cutter wear life in rock tunneling applications

Massalov, T., Yagiz, S. & Rostami, J., 2020, ISRM International Symposium -Eurock2020. p. 7p

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2019

A quantitative estimation of open stope walls overbreak and slough in longhole blasting mining

Adoko, A. C., Yakubov, K. & Alipov, A., 2019, 5th ISRM Young Scholars' Symposium on Rock Mechanics and International Symposium on Rock Engineering for Innovative Future, YSRM 2019. International Society for Rock Mechanics and Rock Engineering, p. 549-554 6 p. (5th ISRM Young Scholars' Symposium on Rock Mechanics and International Symposium on Rock Engineering for Innovative Future, YSRM 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mine stope performance assessment in unfavorable rock mass conditions using neural network-based classifiers

Adoko, A. C., Yakubov, K. & Alipov, A., 2019, 5th ISRM Young Scholars' Symposium on Rock Mechanics and International Symposium on Rock Engineering for Innovative Future, YSRM 2019. International Society for Rock Mechanics and Rock Engineering, p. 451-456 6 p. (5th ISRM Young Scholars' Symposium on Rock Mechanics and International Symposium on Rock Engineering for Innovative Future, YSRM 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Multi-collocated cokriging: An application to grade estimation in the mining industry

Madani, N., Jan 1 2019, Mining Goes Digital - Proceedings of the 39th international symposium on Application of Computers and Operations Research in the Mineral Industry, APCOM 2019. Mueller, C., Assibey-Bonsu, W., Baafi, E., Dauber, C., Doran, C., Jaszczuk, M. J. & Nagovitsyn, O. (eds.). CRC Press/Balkema, p. 158-167 10 p. (Mining Goes Digital - Proceedings of the 39th international symposium on Application of Computers and Operations Research in the Mineral Industry, APCOM 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Using intact rock brittleness for assessing TBM penetration

Yagiz, S. & Yazitova, A., 2019, The 4th International Conference on Geotechnical Research and Engineering.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2018

Design and performance of smart water shock injection SWSI in carbonate reservoirs

Al-Kharusi, B., Pourafshary, P., Mosavat, N. & Al-Wahaibi, Y., Jan 1 2018, Society of Petroleum Engineers - SPE Annual Caspian Technical Conference and Exhibition 2018, CTCE 2018. Society of Petroleum Engineers, (Society of Petroleum Engineers - SPE Annual Caspian Technical Conference and Exhibition 2018, CTCE 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Uncertainty quantification of rock quality designation at the Gazestan Phosphate deposit

Madani, N., Yagiz, S., Adoko, A. C. & Battalgazy, N., Jun 14 2018, Geometallurgy Conference: Back to the Future 2018. p. 207-220 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

Quantifying rock mass behavior around underground

Adoko, A. C., Phumaphi, P. T. & Zvarivadza, T., Jan 1 2017, 51st US Rock Mechanics / Geomechanics Symposium 2017. American Rock Mechanics Association (ARMA), Vol. 4. p. 2759-2767 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

Physical and mechanical properties of travertines utilized for constructions: an example from Denizli

Yagiz, S., 2016, 12th International Congress on Advances in Civil Engineering, International Society of Civil Engineering, . 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Utilizing rock brittleness for estimating TBM penetration rate in rocks

Yagiz, S., 2016, 12th International Congress on Advances in Civil Engineering. 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Geomechanical aspects of gypsums and dolomites in Kizilyer (Denizli)

Yagiz, S., Gireson, K., Kaval, O. & Arsay, A. A., 2014, 5th Global Stone Congress Proceedings, 22-25 October 2014. Tugrul et al, A. (ed.). Antalya Turkey, p. 149-159 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Joint conditional simulation of an iron ore deposit using Minimum or Maximum Autocorrelation Factor transformation

Mai, N. L., Erten, O. & Topal, E., Jan 1 2014, Proceedings of the 16th International Association for Mathematical Geosciences - Geostatistical and Geospatial Approaches for the Characterization of Natural Resources in the Environment: Challenges, Processes and Strategies, IAMG 2014. Raju, N. J. (ed.). Capital Publishing Company, p. 333-336 4 p. (Proceedings of the 16th International Association for Mathematical Geosciences - Geostatistical and Geospatial Approaches for the Characterization of Natural Resources in the Environment: Challenges, Processes and Strategies, IAMG 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2012

Effect of rock mass conditions on TBM utilization factor in Karaj-Tehran Water Conveyance Tunnel

Frough, O., Yagiz, S. & Torabi, SR., 2012, ITA-AITES World Tunnel Congress 2012, International Tunnelling Association. p. 18-23 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Geomechanical and industrial aspects of natural stones quarried in Denizli Surroundings (in Turkish with English abstract)

Yagiz, S., Gireson, K. & Kaval, O., 2012, 8th International Marble and Natural Stone Congress. Ersoy et al, B. (ed.). Afyon, p. 235-247 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2011

On sampling strategies for small and continuous data with the modeling of Genetic Programming and ANFIS

Sen, S., Sezer, EA., Gokceoglu, C. & Yagiz, S., 2011, The International Fuzzy Systems Association (IFSA) . p. 199-202 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sustainability assessment methods in oil shale mine closure

Sabanov, S., Pastarus, J. R. & Shommet, J., Jan 1 2011, Proceedings of the 8th International Scientific and Practical Conference on Environment, Technology and Resources. Rezekne Higher Education Institution, p. 271-275 5 p. (Vide. Tehnologija. Resursi - Environment, Technology, Resources; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2010

Travertine as construction and building material

YAGIZ, S., 2010, 2nd International Symposium on Sustainable Development 8-9 June 2010 Sarajevo Bosna-Herzegovina. Padem et al, H. (ed.). p. 667-673 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2009

Adjusted real option valuation to maximise mining project value - A case study using century mine

Shafiee, S., Topal, E. & Nehring, M., Dec 1 2009, Project Evaluation Conference 2009. 3 ed. p. 125-134 10 p. (Australasian Institute of Mining and Metallurgy Publication Series; no. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Citations (Scopus)

Geotechnical considerations on TBM tunneling in rock mass

Yagiz, S., 2009, Proceedings of the Second International Conference on New Developments in Soil Mechanics and Geotechnical Engineering. Atalar et al., C. (ed.). Nicosia-Cyprus, Vol. 1. p. 504-511 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Priority Assessment of Investment in Development of Nanotechnology in Upstream Petroleum Industry

Pourafshary, P., Azimipour, S. S., Motamedi, P., Samet, M., Taheri, S. A., Bargozin, H. & Hendi, S. S., 2009, SPE Saudi Arabia Section Technical Symposium. (SPE Saudi Arabia Section Technical Symposium).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

48 Citations (Scopus)

The Use of Capacitance-Resistive Model for Estimation of Fracture Distribution in the Hydrocarbon Reservoir

Delshad, M., Bastami, A. & Pourafshary, P., Apr 4 2009, SPE.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)
2008

Laboratory tests suggested for mechanical excavation in rock mass (in Turkish with English Abstract)

Yagiz, S., Ozdemir, L. & Rostami, J., 2008, IX. Regional Rock Mechanics Symposium, 30-31 October, 2008, DEU, İzmir Turkey. Turk et al, N. (ed.). p. 225-244 20 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Statistical evaluation of the relationship between Schmidt hardness values and basic physical properties of weak rocks (in Turkish with English Abstract)

Yagiz, S., Uysal, M. & Tuzcuoglu, B., Jun 27 2008, 6th International Marble and Natural Stone Congress. Ersoy et al, B. (ed.). Afyon, p. 303-312 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2007

Analysis of earthquakes available influence on 'Estonia' mine underground construction stability

Nikitin, O., Sabanov, S. & Pastarus, J. R., Jan 1 2007, Environment. Technology. Resources - Proceedings of the 6th International Scientific and Practical Conference. Rezeknes Augstskola, p. 78-84 7 p. (Environment. Technology. Resources - Proceedings of the 6th International Scientific and Practical Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Production schedule optimisation in underground hard rock mining using mixed integer programming

Nehring, M. & Topal, E., Dec 1 2007, Project Evaluation Conference 2007 - Proceedings. p. 169-175 7 p. (Australasian Institute of Mining and Metallurgy Publication Series).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

17 Citations (Scopus)

The surface miner sustainable technology introduction for oil-shale mining in Estonia

Nikitin, O., Väli, E., Sabanov, S. & Pastarus, J. R., Jan 1 2007, Environment. Technology. Resources - Proceedings of the 6th International Scientific and Practical Conference. Rezeknes Augstskola, p. 55-61 7 p. (Environment. Technology. Resources - Proceedings of the 6th International Scientific and Practical Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)
2006

A model for the prediction of tunnel boring machine performance

Yagiz, S., 2006, IAEG2006: Engineering Geology for Tomorrow's Cities: 10th IAEG International Congress. p. 1-10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An investigation on the relationship between linear cutting force and some engineering properties of rocks (in Turkish with English abstract)

Yagiz, S., 2006, VIII. Regional Rock Mechanics Symposium, Istanbul Technical University, . Vardar et al, M. (ed.). Istanbul, p. 99-106 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering geology studies for urban areas: An example of Denizli Industrial Area (in Turkish with English abstract)

Yagiz, S., Kumsar, H., Özkul, M. & Sen, G., 2006, Symposium on Recent Applications in Engineering Geology, 25-27 May 2006. Kumsar et al, H. (ed.). p. 573-582 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Geological and geotechnical investigation of areas around the Denizli Ring Road for site selection in urbanization (in Turkish with English abstract)

Kumsar, H., Özkul, M., Yagiz, S., Tasdelen, S., Kaya, A., Hançer, M., Kaya, M., Topal, S. & Erten, H., 2006, Symposium on Recent Applications in Engineering Geology, 25-27 May 2006. Kumsar et al, H. (ed.). p. 533-542 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Geotechnical investigations on natural stone operation: Karatas Territory (Denizli) natural stone exploration (in Turkish with English abstract)

Yagiz, S. & Aydin, A., 2006, 5th Marble and Natural Stone Symposium, 2-3 March 2006, Afyon . Ersoy et al, M. (ed.). p. 229-239 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Machine Selection Criteria for Mechanical Excavation of Natural Materials

Yagiz, S., 2006, 11th International Material Symposium, 13-117. April 19-21, 2006, Denizli, Turkey. Kovan et al, V. (ed.). 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Recent advancement in predicting TBM performance

Yagiz, S., 2006, 7th International Congress on Advances in Civil Engineering, Int. Society of Civil Engineerng. p. 06-247 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Using GPR (Ground Penetration Radar) and seismic refraction methods at the natural stone quarries (in Turkish with English abstract)

Aydin, A. & Yagiz, S., 2006, Symposium on Recent Applications in Engineering Geology, 25-27 May 2006. Kumsar et al, H. (ed.). Denizli Turkey, p. 415-422 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2005

Concept of risk assessment for Estonian oil shale mines

Pastarus, J. R. & Sabanov, S., Jan 1 2005, Proceedings of the 5th International Scientific and Practical Conference on Environment, Technology and Resources. Rezekne Higher Education Institution, p. 237-242 6 p. (Vide. Tehnologija. Resursi - Environment, Technology, Resources).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Geomechanical assessment of travertine in Antalya Region, Turkey

Yagiz, S. & Akyol, E., 2005, Proceeding of First International Symposium on Travertine. Turkey, p. 235-239 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Immediate roof stability analysis for new room-and-pillar mining technology in "Estonia" mine

Nikitin, O. & Sabanov, S., Jan 1 2005, Proceedings of the 5th International Scientific and Practical Conference on Environment, Technology and Resources. Rezekne Higher Education Institution, p. 262-269 8 p. (Vide. Tehnologija. Resursi - Environment, Technology, Resources).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Influence of regional tectonics and geological structures on marble quarry operation: An example from Antalya region

Kaya, A. & Yagiz, S., 2005, Proceedings of First International Symposium on Travertine. p. 135-141 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution