If you made any changes in Pure these will be visible here soon.

Research Output 2001 2019

  • 425 Citations
  • 13 h-Index
  • 51 Article
  • 23 Conference contribution
  • 1 Chapter
  • 1 Conference article
Filter
Conference contribution
2016

Ice resistant structure optimisation of the steel conductor supported wellhead platform in the caspian sea

Tleshev, M., Spitas, C. & Kim, J., Jan 1 2016, Arctic Technology Conference 2016. Offshore Technology Conference

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wellheads
Steel
wellhead
Ice
steel
2014

Computational modelling of compact gear drives in consideration of interference and compliance

Amani, A. & Spitas, C., Oct 6 2014, International Conference of Computational Methods in Sciences and Engineering 2014, ICCMSE 2014. American Institute of Physics Inc., Vol. 1618. p. 674-694 21 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

interference
vibration
mesh
gear teeth
power transmission

Three ways of assessing the inertial biomechanics of a cyclist's leg

Rios Soltero, E. F., Spitas, C., Flipsen, S. F. J. & Savelberg, H. H. C. M., 2014, Procedia Engineering. Elsevier, Vol. 72. p. 232-237 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Biomechanics
Seats
Position measurement
Skin
Polynomials
2013
5 Citations (Scopus)

Beyond frames: A formal human-compatible representation of ideas in design using non-genetic ad-hoc and volatile class memberships and corresponding architecture for idea operators

Spitas, C., 2013, Proceedings of the International Conference on Engineering Design, ICED. Vol. 2 DS75-02. p. 31-42 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Volatiles
Semantic Web
Semantics
Operator
Semantic Network

Derivation of the equation of caustics for the experimental assessment of distributed contact loads with friction in two dimensions

Spitas, V., Spitas, C., Papadopoulos, G. & Costopoulos, T., 2013, Lecture Notes in Applied and Computational Mechanics. Vol. 56 LNACM. p. 337-350 14 p. (Lecture Notes in Applied and Computational Mechanics; vol. 56 LNACM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Loads (forces)
Friction
Cracks

Design of loboid gear pairs using involute discretization

Spitas, V. & Spitas, C., Jan 1 2013, Power Transmissions - Proceedings of the 4th International Conference. Dobre, G. (ed.). Springer Netherlands, p. 417-425 9 p. (Mechanisms and Machine Science; vol. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Gear teeth
Rotary pumps
Blowers
Pneumatics
1 Citation (Scopus)

Dynamical simulation and calculation of the load factor of spur gears with indexing errors and profile modifications for optimal gear design

Spitas, C., Spitas, V. & Rajabalinejad, M., Jan 1 2013, Power Transmissions - Proceedings of the 4th International Conference. Dobre, G. (ed.). Springer Netherlands, p. 183-196 14 p. (Mechanisms and Machine Science; vol. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Spur gears
Gears
Gear teeth
Geometry

Towards optimum involute gear design by combining addendum and thickness modifications

Spitas, V. & Spitas, C., Jan 1 2013, Power Transmissions - Proceedings of the 4th International Conference. Dobre, G. (ed.). Springer Netherlands, p. 173-181 9 p. (Mechanisms and Machine Science; vol. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Gear teeth
Photoelasticity
Cutting tools
Pitting
2012

A Bayesian framework for uncertainty formulation of engineering design process

Rajabalinejad, M. & Spitas, C., 2012, World Scientific Proc. Series on Computer Engineering and Information Science 7; Uncertainty Modeling in Knowledge Engineering and Decision Making - Proceedings of the 10th International FLINS Conf.. Vol. 7. p. 418-423 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Decision support systems
Probability distributions
Distribution functions
Engineers
Uncertainty
1 Citation (Scopus)

A Gaussian model of expert opinions for supporting design decisions

Rajabalinejad, M. & Spitas, C., 2012, Proceedings of International Design Conference, DESIGN. Vol. DS 70. p. 1579-1586 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Expert Opinion
Gaussian Model
Decision making
Decision Making
Design

Creating a research environment for the evaluation of design education in embodiment design

Spitas, C., Badke-Schaub, P., Spitas, V., Rajabalinejad, M. & Karana, E., 2012, Proceedings of International Design Conference, DESIGN. Vol. DS 70. p. 2075-2084 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Embodiment
Education
Evaluation
Design

Generic form of bayesian monte carlo for models with partial monotonicity

Rajabalinejad, M. & Spitas, C., 2012, 11th International Probabilistic Safety Assessment and Management Conference and the Annual European Safety and Reliability Conference 2012, PSAM11 ESREL 2012. Vol. 1. p. 549-556 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Interpolation
Monte Carlo methods

Reliability based design of engineering systems with monotonic models

Rajabalinejad, M. & Spitas, C., 2012, Advances in Safety, Reliability and Risk Management - Proceedings of the European Safety and Reliability Conference, ESREL 2011. p. 112-115 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Systems engineering
Monte Carlo methods
Gaussian distribution
2010

A C++ -LISP-CAD interface for virtual 2-D gear prototyping

Spitas, V. & Spitas, C., 2010, Proceedings of the 8th International Symposium on Tools and Methods of Competitive Engineering, TMCE 2010. Vol. 1. p. 399-405 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Interfaces (computer)
Gears
Computer aided design
Geometry
Computer aided engineering
1 Citation (Scopus)

Complexity of the gear cutter: A focused discussion of competitive gear manufacturing techno-economics

Spitas, C. & Spitas, V., 2010, Proceedings of the 8th International Symposium on Tools and Methods of Competitive Engineering, TMCE 2010. Vol. 2. p. 817-827 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gear cutters
Gears
Economics
Geometry
2007

Modeling of residual service life of gas turbine rotors for minimizing replacement costs

Zouridaki, E., Spitas, V. & Spitas, C., 2007, Proceedings of the IASTED International Conference on Modelling, Identification, and Control, MIC. p. 253-258 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gas Turbine
Service life
Rotor
Replacement
Gas turbines

Numerical modeling of wire-prestressed gear teeth

Spitas, V. & Spitas, C., 2007, Proceedings of the IASTED International Conference on Modelling, Identification, and Control, MIC. p. 241-246 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gear teeth
Numerical Modeling
Wire rope
Wire
Spur gears
2006
1 Citation (Scopus)

Dynamic modeling and simulation of impact loading during short concrete columns testing

Spitas, V., Spitas, C., Zouridaki, E. & Providakis, C., 2006, Proceedings of the IASTED International Conference on Modelling, Identification, and Control, MIC. p. 297-302 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dynamic Modeling
Dynamic Simulation
Modeling and Simulation
Strain rate
Concretes
3 Citations (Scopus)

Experimental evaluation of stress intensity factors in spur gear teeth

Spitas, V., Papadopoulos, G., Costopoulos, T. & Spitas, C., 2006, Fracture of Nano and Engineering Materials and Structures - Proceedings of the 16th European Conference of Fracture. Kluwer Academic Publishers, p. 1239-1240 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Spur gears
Gear teeth
Stress intensity factors
Teeth
Evaluation
1 Citation (Scopus)

Non-linear dynamical simulation of spur gears with indexing errors and profile modifications

Spitas, V. & Spitas, C., 2006, Proceedings of the IASTED International Conference on Modelling, Identification, and Control, MIC. p. 354-359 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Spur gears
Indexing
Trace
Gears
Simulation

Technical aspects of the manufacture of 4 grease pad assemblies for the CMS experiment

Barone, M., Riboni, P. L., Spitas, C. & Spitas, V., 2006, Astroparticle, Particle and Space Physics, Detectors and Medical Physics Applications - Proceedings of the 9th Conference. p. 539-545 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

greases
machining
assemblies
cost effectiveness
positioning
2002

A new model of improved accuracy for the dynamic behavior of spur gears

Spitas, C. A. & Costopoulos, T. N., 2002, American Society of Mechanical Engineers, Dynamic Systems and Control Division (Publication) DSC. Franchek, M. A. (ed.). Vol. 70. p. 345-353 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Spur gears
Gears
Elastohydrodynamics
Mountings
Lubricants
2001
2 Citations (Scopus)

A new model of improved accuracy for the dynamic behavior of spur gears

Spitas, C. A. & Costopoulos, T. N., 2001, ASME International Mechanical Engineering Congress and Exposition, Proceedings. Vol. 2. p. 1297-1305 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Spur gears
Gears
Elastohydrodynamics
Mountings
Lubricants