Projects per year
Personal profile
Research interests
Professor Didier Talamona, Associate Professor of the school of engineering and digital sciences (SEDS), Mechanical and Aerospace Engineering Department, Nazarbayev University. Didier Talamona received his PhD in engineering sciences from the University Blaise Pascal, France. He is the Chair of the Institutional Research Ethics Committee at NU. His current research interest is in additive manufacturing, green materials and sustainability. He was appointed as expert evaluator for EU – Horizon 2020 in Sustainability. He has been awarded over $1m in research funding in the EU, Singapore and Australia.
His current research interests are: Additive Manufacturing, 3D printing, Production of metal powders, metal powders properties, sustainable development.
His lab is well equipped with: SLA printers (2 Formlabs XL, FFF printer (several Ultimaker S3 and S5), Metal printer Renishaw AM400, atomizer Atolab+, Tensile test machine, CMM (Zeiss 3d scanning system T10 and Duramax 5/5/5), Rheometer for metal powder etc.
He was recently awarded an Economy of the Future grand for the Ministry of Industry, Infrastructure and development (RoK 2021-2023) entitled: “Additive Manufacturing Systems and Metal Powders for the Kazakhstani industry”.
External positions
Fingerprint
- 1 Similar Profiles
Collaborations and top research areas from the last five years
-
Additive manufacturing systems and metal powders for the Kazakh industry
Talamona, D., Perveen, A., Golman, B., Howie, P. & Kostas, K.
9/1/22 → 12/31/23
Project: MES RK
-
Multi scale powder mixed EDM induced Functional Surfaces on Biomedical alloys for enhanced mechanical, electrochemical corrosion, tribological and biological performances
Perveen, A., Talamona, D., Jahan, M. P., Nuta, O., Molardi, C. & Rahman, M.
1/1/22 → 12/31/24
Project: FDCRGP
-
MLS: Design, fabrication & characterization of metal lattice structures using ultrasonically atomized powder
Talamona, D., Perveen, A., Wei, D., Folgheraiter, M., Qureshi, A. & Zhakiyev, N.
1/1/24 → 12/31/26
Project: CRP
-
3DBATT: Three-Dimensional All Solid State Rechargeable Batteries
Bakenov, Z., Nurpeissova, A., Talamona, D., Tazhbayev, Y. & Adair, D.
1/1/20 → 12/31/22
Project: CRP
-
CEHCMCS: Cost effective hybrid casting methods for cellular structures
Talamona, D., Perveen, A. & Qureshi, A.
1/1/20 → 12/31/22
Project: FDCRGP
-
A numerical investigation on material removal mechanism of electro discharge machining of non-conductive ceramics
Razeghiyadaki, A., Molardi, C., Talamona, D., Jahan, M. P. & Perveen, A., 2023, (Accepted/In press) In: International Journal on Interactive Design and Manufacturing.Research output: Contribution to journal › Article › peer-review
-
Compression Behavior of Pilar Octahedral Lattice Structures
Syrlybayev, D., Perveen, A. & Talamona, D., 2023, Materials Science Forum. Trans Tech Publications, p. 143-148 6 p. (Materials Science Forum; vol. 1087).Research output: Chapter in Book/Report/Conference proceeding › Chapter
-
Experimental investigation of mechanical properties and energy absorption capabilities of hybrid lattice structures manufactured using fused filament fabrication
Syrlybayev, D., Perveen, A. & Talamona, D., 2023, (Accepted/In press) In: International Journal of Advanced Manufacturing Technology.Research output: Contribution to journal › Article › peer-review
Open Access2 Citations (Scopus) -
Influence of fused filament fabrication parameters on the flexural strength of nylon
Dairabayeva, D., Perveen, A. & Talamona, D., Aug 2023, In: Manufacturing Letters. 35, p. 502-508 7 p.Research output: Contribution to journal › Article › peer-review
-
Optimization of Dimensional Accuracy and Surface Roughness of SLA Patterns and SLA-Based IC Components
Mukhangaliyeva, A., Dairabayeva, D., Perveen, A. & Talamona, D., Oct 2023, In: Polymers. 15, 20, 4038.Research output: Contribution to journal › Article › peer-review
Open Access