Research output per year
Research output per year
- 1 - 50 out of 221 results
Search results
-
2025
Correction to: Construction 3D printing: a critical review and future research directions (Progress in Additive Manufacturing, (2023), 8, 6, (1393-1421), 10.1007/s40964-023-00409-8)
Baigarina, A., Shehab, E. & Ali, M. H., 2025, (Accepted/In press) In: Progress in Additive Manufacturing.Research output: Contribution to journal › Comment/debate › peer-review
-
Correction to: Construction 3D printing: a critical review and future research directions (Progress in Additive Manufacturing, (2023), 8, 6, (1393-1421), 10.1007/s40964-023-00409-8)
Baigarina, A., Shehab, E. & Ali, M. H., Apr 2025, In: Progress in Additive Manufacturing. 10, 4, p. 3067 1 p.Research output: Contribution to journal › Comment/debate › peer-review
1 Citation (Scopus) -
Cost-effective sensor-based digital twin for fused deposition modeling 3D printers
Shomenov, K., Ali, M. H., Jyeniskhan, N., Al-Ashaab, A. & Shehab, E., 2025, (Accepted/In press) In: International Journal of Computer Integrated Manufacturing.Research output: Contribution to journal › Article › peer-review
-
Development of cost-effective geopolymer mortars from low-grade metakaolin and bottom ash for 3D construction printing
Temirzakuly, B., Nurgaliuly, D., Kim, J. R., Shehab, E. & Ali, M. H., 2025, (Accepted/In press) In: Structural Concrete.Research output: Contribution to journal › Article › peer-review
-
Diffusion models for topology optimization in 3D printing applications
Bekbolat, A., Kurokawa, S., Kamaru Zaman, F. H., Samad Kamal, M. A., Shehab, E. & Ali, M. H., Apr 7 2025, In: Journal of Applied Physics. 137, 13, 135102.Research output: Contribution to journal › Article › peer-review
Open Access -
2024
An Empirical Analysis of Factors Influencing Industry 4.0 Implementation in Manufacturing SMEs
Aitzhanova, M., Dikhanbayeva, D., Turkyilmaz, A. & Shehab, E., 2024, Springer Series in Advanced Manufacturing. Springer Nature, p. 157-177 21 p. (Springer Series in Advanced Manufacturing; vol. Part F3409).Research output: Chapter in Book/Report/Conference proceeding › Chapter
-
Convolutional Neural Network-Based Defect Detection Technique in FDM Technology
Kozhay, K., Turarbek, S., Asselbekova, T., Ali, H. & Shehab, E., 2024, In: Procedia Computer Science. 231, p. 119-128 10 p.Research output: Contribution to journal › Conference article › peer-review
Open Access5 Citations (Scopus) -
DEVELOPMENT OF AUGMENTED REALITY SYSTEM FOR ADDITIVE MANUFACTURING
Rysbek, Y., Jyeniskhan, N., Hazrat Ali, M. & Shehab, E., 2024, SIST 2024 - 2024 IEEE 4th International Conference on Smart Information Systems and Technologies, Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 369-374 6 p. (SIST 2024 - 2024 IEEE 4th International Conference on Smart Information Systems and Technologies, Proceedings).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2 Citations (Scopus) -
Development of Digital Twin for FDM Printer with Preventive Cyber-Attack and Control Algorithms
Ali, M. H., Malik, A., Jyeniskhan, N., Mahmood, M. A., Shehab, E. & Liou, F., 2024, (Accepted/In press) In: IEEE Access.Research output: Contribution to journal › Article › peer-review
-
Experimental Study on Warpage Phenomenon of Wax Parts Manufactured by Fused Filament Fabrication
Mukhtarkhanov, M., Shehab, E. & Ali, M. H., Jan 11 2024, In: Polymers. 16, 2Research output: Contribution to journal › Article › peer-review
7 Citations (Scopus) -
Exploring the integration of digital twin and additive manufacturing technologies
Jyeniskhan, N., Shomenov, K., Ali, M. H. & Shehab, E., Nov 2024, In: International Journal of Lightweight Materials and Manufacture. 7, 6, p. 860-881 22 p.Research output: Contribution to journal › Review article › peer-review
Open Access4 Citations (Scopus) -
Performance evaluation of developed controllers for unmanned aerial vehicles with reference camera
Tassanbi, A., Ali Khan, A., Kashkynbayev, A., Shehab, E., Duc Do, T. & Ali, M. H., 2024, (Accepted/In press) In: Measurement and Control (United Kingdom).Research output: Contribution to journal › Article › peer-review
Open Access1 Citation (Scopus) -
Recent approaches of interface strengthening in fibre metal laminates: Processes, measurements, properties and numerical analysis
Bakhbergen, U., Abbassi, F., Kalimuldina, G., Montazami, R., Shehab, E. & Araby, S., Oct 2024, In: Composites Part B: Engineering. 285, 111744.Research output: Contribution to journal › Article › peer-review
10 Citations (Scopus) -
2023
3D Printed Large-Scale Insole and its Printing Challenges
Hazrat Ali, M., Trubayev, S. & Shehab, E., Jan 10 2023, 8th Brunei International Conference on Engineering and Technology 2021. Ali, M. Y., Karri, R. R., Shams, S., Rosli, R., Rahman, E. K. A. & Singh, R. (eds.). American Institute of Physics Inc., 050049. (AIP Conference Proceedings; vol. 2643).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
A Lean Knowledge-Based Decision Support System for Cost Estimation in the Foundry Industry
Khan, S. S., Sajid, M., Wasim, A., Shehab, E., Abdalla, H. & Hussain, S., 2023, In: Brazilian Archives of Biology and Technology. 66, e23220658.Research output: Contribution to journal › Article › peer-review
Open Access -
An uncertainty management framework to support model-based definition and enterprise
Goher, K., Al-Ashaab, A., Sarfraz, S. & Shehab, E., Sept 2023, In: Computers in Industry. 150, 103944.Research output: Contribution to journal › Article › peer-review
Open Access4 Citations (Scopus) -
Autonomous Print-Bed Calibration Technique for Large-Scale FDM 3D Printer
Ali, M. H., Sagynbayev, N., Mussabayev, A. & Shehab, E., 2023, 2023 IEEE 11th Conference on Systems, Process and Control, ICSPC 2023 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 299-303 5 p. (2023 IEEE 11th Conference on Systems, Process and Control, ICSPC 2023 - Proceedings).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Construction 3D printing: a critical review and future research directions
Baigarina, A., Shehab, E. & Ali, M. H., 2023, (Accepted/In press) In: Progress in Additive Manufacturing.Research output: Contribution to journal › Review article › peer-review
21 Citations (Scopus) -
Cost Modelling for Recycling Fiber-Reinforced Composites: State-of-the-Art and Future Research
Shehab, E., Meiirbekov, A., Amantayeva, A. & Tokbolat, S., Jan 2023, In: Polymers. 15, 1, 150.Research output: Contribution to journal › Review article › peer-review
Open Access14 Citations (Scopus) -
Development of a large-scale multi-extrusion FDM printer, and its challenges
Ali, M. H., Kurokawa, S., Shehab, E. & Mukhtarkhanov, M., Jun 2023, In: International Journal of Lightweight Materials and Manufacture. 6, 2, p. 198-213 16 p.Research output: Contribution to journal › Article › peer-review
Open Access30 Citations (Scopus) -
Development of a Multi-Material Selective Laser Sintering-Based 3D Printer
Ali, M. H., Zhantlessov, Y., Zhagiparova, A., Adair, D. & Shehab, E., 2023, 2023 IEEE 11th Conference on Systems, Process and Control, ICSPC 2023 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 177-181 5 p. (2023 IEEE 11th Conference on Systems, Process and Control, ICSPC 2023 - Proceedings).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Development of Middleware for Data-Centric Digital Twin of Additive Manufacturing
Shaimergenova, K., Ali, M. H. & Shehab, E., 2023, SIST 2023 - 2023 IEEE International Conference on Smart Information Systems and Technologies, Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 412-416 5 p. (SIST 2023 - 2023 IEEE International Conference on Smart Information Systems and Technologies, Proceedings).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Digital Twin for Additive Manufacturing: Challenges and Future Research Direction
Jyeniskhan, N., Shaimergenova, K., Ali, M. H. & Shehab, E., 2023, SIST 2023 - 2023 IEEE International Conference on Smart Information Systems and Technologies, Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 337-342 6 p. (SIST 2023 - 2023 IEEE International Conference on Smart Information Systems and Technologies, Proceedings).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
4 Citations (Scopus) -
Enhancing Mechanical Property of Multi-material Printed Object Through Machine-Learning
Ali, M. H., Sabyrov, N., Tanveer, M. H., Kurokawa, S. & Shehab, E., 2023, Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus - Proceedings of FAIM 2022. Kim, K.-Y., Rickli, J. & Monplaisir, L. (eds.). Springer Science and Business Media Deutschland GmbH, p. 19-27 9 p. (Lecture Notes in Mechanical Engineering).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Environmental Assessment of Recycling Carbon Fibre-Reinforced Composites: Current Challenges and Future Opportunities
Meiirbekov, A., Amantayeva, A., Tokbolat, S., Suleimen, A., Sarfraz, S. & Shehab, E., 2023, Materials Horizons: From Nature to Nanomaterials. Springer Nature, p. 25-49 25 p. (Materials Horizons: From Nature to Nanomaterials).Research output: Chapter in Book/Report/Conference proceeding › Chapter
-
Experimental study of wax-material support structure for fused deposition modeling printed parts with overhanging sections
Mukhtarkhanov, M., Shehab, E., Araby, S. & Ali, M. H., Dec 2023, In: International Journal of Lightweight Materials and Manufacture. 6, 4, p. 534-542 9 p.Research output: Contribution to journal › Article › peer-review
Open Access2 Citations (Scopus) -
Industry 4.0 Readiness Assessment of Enterprises in Kazakhstan
Dikhanbayeva, D., Aitzhanova, M., Lukhmanov, Y., Turkyilmaz, A., Shehab, E. & El-Thalji, I., 2023, Advances in Production Management Systems. Production Management Systems for Responsible Manufacturing, Service, and Logistics Futures - IFIP WG 5.7 International Conference, APMS 2023, Proceedings. Alfnes, E., Romsdal, A., Strandhagen, J. O., von Cieminski, G. & Romero, D. (eds.). Springer Science and Business Media Deutschland GmbH, p. 297-310 14 p. (IFIP Advances in Information and Communication Technology; vol. 689 AICT).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Integrating Machine Learning Model and Digital Twin System for Additive Manufacturing
Jyeniskhan, N., Keutayeva, A., Kazbek, G., Ali, M. H. & Shehab, E., 2023, In: IEEE Access. 11, p. 71113-71126 14 p.Research output: Contribution to journal › Article › peer-review
Open Access32 Citations (Scopus) -
Investigation of Multi-material Composite Parts Manufactured by Multi-extrusion FDM Printer
Mukhtarkanov, M., Shehab, E., Tanveer, M. H., Araby, S. & Ali, M. H., 2023, Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus - Proceedings of FAIM 2022. Kim, K.-Y., Rickli, J. & Monplaisir, L. (eds.). Springer Science and Business Media Deutschland GmbH, p. 12-18 7 p. (Lecture Notes in Mechanical Engineering).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
3 Citations (Scopus) -
Investigation of Solar Water Heating Systems (SWHS) and Their Implementation in Kazakhstan
Nabidollayeva, F., Pivovarova, S., Safin, S., Takisheva, A. & Shehab, E., 2023, SIST 2023 - 2023 IEEE International Conference on Smart Information Systems and Technologies, Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 445-450 6 p. (SIST 2023 - 2023 IEEE International Conference on Smart Information Systems and Technologies, Proceedings).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Machine Learning-Based Topology Optimization in 3D Printing
Askhatova, A., Gabdulla, Y., Bekbolat, A., Shehab, E. & Ali, M. H., 2023, 2023 International Conference on Smart Applications, Communications and Networking, SmartNets 2023. Institute of Electrical and Electronics Engineers Inc., (2023 International Conference on Smart Applications, Communications and Networking, SmartNets 2023).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Systems Engineering Approach for Designing Electrical Vehicle for Shell Eco-Marathon
Dukenderov, A., Abilez, A., Onabek, A., Aitbayev, A., Baimukhan, Y. & Shehab, E., 2023, SIST 2023 - 2023 IEEE International Conference on Smart Information Systems and Technologies, Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 451-456 6 p. (SIST 2023 - 2023 IEEE International Conference on Smart Information Systems and Technologies, Proceedings).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
2022
A critical review of 3D printing and digital manufacturing in construction engineering
Ali, M. H., Issayev, G., Shehab, E. & Sarfraz, S., 2022, (Accepted/In press) In: Rapid Prototyping Journal. 28, 7, p. 1312-1324 13 p.Research output: Contribution to journal › Review article › peer-review
85 Citations (Scopus) -
An advisory system to support Industry 4.0 readiness improvement
Lukhmanov, Y., Dikhanbayeva, D., Yertayev, B., Shehab, E. & Turkyilmaz, A., 2022, In: Procedia CIRP. 107, p. 1361-1366 6 p.Research output: Contribution to journal › Conference article › peer-review
Open Access7 Citations (Scopus) -
Analysis of Textile Manufacturing SMEs in Kazakhstan for Industry 4.0
Dikhanbayeva, D., Aitzhanova, M., Shehab, E. & Turkyilmaz, A., 2022, In: Procedia CIRP. 107, p. 888-893 6 p.Research output: Contribution to journal › Conference article › peer-review
Open Access10 Citations (Scopus) -
A System Engineering Investigation for Product-Service System Realization of Heat Pumps in Kazakhstan
Reshodko, A., Kabimoldina, I., Khozhamuratova, M., Khamit, K., Yermek, M. & Shehab, E., 2022, SIST 2022 - 2022 International Conference on Smart Information Systems and Technologies, Proceedings. Institute of Electrical and Electronics Engineers Inc., (SIST 2022 - 2022 International Conference on Smart Information Systems and Technologies, Proceedings).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Challenges of Developing Digital Twin for Additive Layer Manufacturing in the Aerospace Industry
Kozhay, K., Turarbek, S., Ali, M. H. & Shehab, E., 2022, International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022. Institute of Electrical and Electronics Engineers Inc., (International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2 Citations (Scopus) -
Design and Development of 3D Printed Geneva Wheel Mechanism
Yerubayeva, A., Shehab, E., Malik, K. I. & Ali, M. H., 2022, International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022. Institute of Electrical and Electronics Engineers Inc., (International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Design and development of a 3D printed water driven spinal posture corrector
Ijaz, M. K., Shomenov, K., Otegen, D., Shehab, E. & Ali, M. H., 2022, (Accepted/In press) In: International Journal of Advanced Manufacturing Technology.Research output: Contribution to journal › Article › peer-review
4 Citations (Scopus) -
Design and Development of a Small-Scale 5-DOF 3D Printed Robot Manipulator
Trubayev, S., Shehab, E. & Ali, M. H., 2022, 2022 IEEE 18th International Colloquium on Signal Processing and Applications, CSPA 2022 - Proceeding. Institute of Electrical and Electronics Engineers Inc., p. 260-265 6 p. (2022 IEEE 18th International Colloquium on Signal Processing and Applications, CSPA 2022 - Proceeding).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
3 Citations (Scopus) -
Developing a digital transformation process in the manufacturing sector: Egyptian case study
Abdallah, Y. O., Shehab, E. & Al-Ashaab, A., 2022, (Accepted/In press) In: Information Systems and e-Business Management. 20, 3, p. 613-630 18 p.Research output: Contribution to journal › Article › peer-review
Open Access16 Citations (Scopus) -
Industry 4.0: Clustering of concepts and characteristics
Suleiman, Z., Shaikholla, S., Dikhanbayeva, D., Shehab, E. & Turkyilmaz, A., 2022, In: Cogent Engineering. 9, 1, 2034264.Research output: Contribution to journal › Review article › peer-review
Open Access83 Citations (Scopus) -
IoT-Based Real-Time 3D Printing Monitoring System
Kazhymurat, T., Shehab, E. & Ali, M. H., 2022, SIST 2022 - 2022 International Conference on Smart Information Systems and Technologies, Proceedings. Institute of Electrical and Electronics Engineers Inc., (SIST 2022 - 2022 International Conference on Smart Information Systems and Technologies, Proceedings).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
6 Citations (Scopus) -
Powder bed fusion–laser melting (PBF–LM) process: latest review of materials, process parameter optimization, application, and up-to-date innovative technologies
Ali, M. H., Sabyrov, N. & Shehab, E., 2022, (Accepted/In press) In: Progress in Additive Manufacturing.Research output: Contribution to journal › Review article › peer-review
19 Citations (Scopus) -
Process Parameter Optimization for 3D Printed Investment Casting Wax Pattern and Its Post-Processing Technique
Mukhtarkhanov, M., Shehab, E. & Ali, M. H., Jul 1 2022, In: Applied Sciences (Switzerland). 12, 14, 6847.Research output: Contribution to journal › Article › peer-review
Open Access14 Citations (Scopus) -
Recent advances and application of Selective Laser Melting (SLM) technology in the aerospace industry
Yerubayeva, A., Shehab, E. & Ali, M. H., Apr 25 2022, International Conference on Informatics, Technology, and Engineering 2021, InCITE 2021: Leveraging Smart Engineering. Parung, J., Pah, N. D., Sutrisna, P. D. & Suciadi, M. F. S. (eds.). 1 ed. American Institute of Physics Inc., Vol. 2470. p. 30002 030002. (AIP Conference Proceedings; vol. 2470).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open Access7 Citations (Scopus) -
Sustainable Digital Transformation: The Role of Organisational Digital Culture
Abdallah, Y. O., Shehab, E. & Al-Ashaab, A., Nov 8 2022, Advances in Manufacturing Technology XXXV - Proceedings of the 19th International Conference on Manufacturing Research, Incorporating the 36th National Conference on Manufacturing Research. Shafik, M. & Case, K. (eds.). IOS Press BV, p. 60-66 7 p. (Advances in Transdisciplinary Engineering; vol. 25).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open Access2 Citations (Scopus) -
2021
A Cost Modelling System for Recycling Carbon Fiber-Reinforced Composites
Shehab, E., Meiirbekov, A., Amantayeva, A., Suleimen, A., Tokbolat, S. & Sarfraz, S., Dec 1 2021, In: Polymers. 13, 23Research output: Contribution to journal › Article › peer-review
21 Citations (Scopus) -
A Fuzzy Logic-Based Cost Modelling System for Recycling Carbon Fibre Reinforced Composites
Shehab, E., Meiirbekov, A., Amantayeva, A., Suleimen, A., Tokbolat, S., Sarfraz, S. & Ali, M. H., Dec 14 2021, In: Polymers. 13, 24, 4370.Research output: Contribution to journal › Article › peer-review
Open Access6 Citations (Scopus) -
A systems engineering study of integration reverse vending machines into the waste management system of Kazakhstan
Amantayeva, A., Alkuatova, A., Kanafin, I., Tokbolat, S. & Shehab, E., 2021, (Accepted/In press) In: Journal of Material Cycles and Waste Management. 23, 3, p. 872-884 13 p.Research output: Contribution to journal › Article › peer-review
Open Access8 Citations (Scopus)