Projects per year
Personal profile
Personal profile
Dr. Md. Hazrat Ali obtained his Ph.D. degree in Mechanical Engineering from Kyushu University, Japan. He earned B.Sc. and M.Sc. degrees in Mechatronics Engineering from IIUM, Malaysia. His Ph.D. thesis focused on developing integrated control systems in precision measurement for variable deep-holes applying laser beam, optical components, CCD camera, servo, and stepper motors. The research was carried out under the Japanese Government Scholarship (MEXT).
Dr. Ali has attracted over $ 1.0 Million in research grants funded by internal and external organizations. He has published over 100 scientific papers in high-impact journals, top-tier conferences, and symposiums. He has supervised over 40 students including Ph.D. and M.Sc. thesis, as well as Capstone projects.
Dr. Ali achieved 1 silver and 1 bronze medals for his innovative technology at an international exhibition held in Malaysia. He has 1 patent (EPO) and 1 commercialized research output. He organized a special session at the FAIMS 2022 conference, USA. He has served as the session chair and technical program committee member of over 10 international conferences. He is also a regular reviewer of several high-impact journals.
Research interests
1. Linear/non-linear, Fuzzy, and Intelligent Control Systems
2. Industrial Automation
3. Mechatronic Systems Design and Development
4. Robotics, Sensor, Actuator, and UAV
5. Precision Engineering
6. Smart Manufacturing
7. Additive Manufacturing and 3D Printing
8. Digital Twin
Teaching
1. Control Systems
2. Industrial Automation
3. Modern Control Engineering
4. Engineering Dynamics
5. Numerical Methods in Engineering
6. Materials and Manufacturing I
Professional Information
Membership
1. Senior Member, IEEE
2. Member, IEEE Robotics and Automation Society
3. Member, IEEE Young Professionals
4. Member, IEEE Control Systems Society
5. IMechE, coordinator for Kazakhstan Chapter
6. IMechE SC, Advisor at Nazarbayev Univesrity
Fingerprint
Dive into the research topics where Md. Hazrat Ali is active. These topic labels come from the works of this person. Together they form a unique fingerprint.
- 6 Similar Profiles
Collaborations and top research areas from the last five years
Recent external collaboration on country/territory level. Dive into details by clicking on the dots or
-
Sustainable Construction 3D Printing: Utilization of Kazakhstan’s Industrial Waste and Green Cement
Ali, M. H. (PI), Shon, C. (Co-PI), Shehab, E. (Other Faculty/Researcher) & Scrivener , K. (Other participant)
2/4/25 → 12/31/27
Project: FDCRGP
-
Cost Effective Design and Manufacture of Flexible Metallic Fine Adjustment Mechanisms for Aerospace Application using Rapid Investment Casting
Shehab, E. (PI), Ali, M. H. (Other Faculty/Researcher), Mukhtarkhanov, M. (Postdoctoral scholar (PhD degree holder)), Erkoyuncu, J. A. (Other Faculty/Researcher), Al-Ashaab, A. (Other Faculty/Researcher) & Mahmoud, K. (Other Faculty/Researcher)
2/4/25 → 12/31/27
Project: FDCRGP
-
Novel material development for sustainable construction printing using Kazakhstan’s industrial byproducts
Ali, M. H. (PI)
1/1/25 → 12/31/27
Project: Government
-
АР13068039: Development of next-generation 3D construction printer for geopolymers made from industrial by-products in Kazakhstan
Ali, M. H. (PI), Mukhametkaliyev, T. (Other Faculty/Researcher), Baigarina, A. (Other Faculty/Researcher), Satkhan, A. (Undergraduate student), Iskakov, A. (Undergraduate student), Temirzakuly, B. (Undergraduate student), Sultangazin, S. (Other participant) & Bekbolat, A. (Other participant)
1/1/22 → 12/31/24
Project: Government
-
Synchronization analysis of shunting inhibitory cellular neural networks
Kashkynbayev, A. (PI) & Ali, M. H. (Co-PI)
1/1/22 → 12/31/24
Project: CRP
-
A novel method to enhance interlayer bond in 3D-printed concrete using dry-powder application of supplementary cementitious materials
Omarov, B., Ali, M. H. & Memon, S. A., Jul 2026, In: Case Studies in Construction Materials. 24, e06008.Research output: Contribution to journal › Article › peer-review
Open Access1 Link opens in a new tab Citation (Scopus) -
Design and Development of a Rotating Nozzle for Large-Scale Construction 3D Printer
Sarsenova, B., Uskembayeva, A., Dursunov, R., Temirzakuly, B., Shehab, E. & Ali, M. H., Feb 2026, In: Buildings. 16, 3, 611.Research output: Contribution to journal › Article › peer-review
Open Access -
Development of a Digital Twin for Construction 3D Printer with Machine Learning Defect Detection Algorithm
Khader, K., Shomenov, K., Yermekbayev, B., Ali, M. H. & Shehab, E., 2026, (Accepted/In press) In: IEEE Access.Research output: Contribution to journal › Article › peer-review
Open Access -
Early Diagnosis of Dental Conditions Through Intelligent Imaging
Roy, K., Khan, M. E., Das, P., Niloy, S. B., Al Emran, M., Tanmoy, O. B. & Ali, M. H., 2026, 2026 IEEE 2nd International Conference on Quantum Photonics, Artificial Intelligence and Networking, QPAIN 2026. Shah, M. S. (ed.). Institute of Electrical and Electronics Engineers Inc., (2026 IEEE 2nd International Conference on Quantum Photonics, Artificial Intelligence and Networking, QPAIN 2026).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Machine Learning-Based Optimization of Sustainable Mix Design for 3D-Printed Concrete Using Recycled Materials
Kravchenko, E., Zhelnin, M., Minkina, T., Jelagin, D., Ali, M. H. & Cheeseman, C., Aug 1 2026, In: Journal of Materials in Civil Engineering. 38, 8, 04026214.Research output: Contribution to journal › Article › peer-review