Projects per year
Personal profile
Personal profile
Dr. Md. Hazrat Ali obtained his Ph.D. degree in Mechanical Engineering from Kyushu University, Japan. He earned B.Sc. and M.Sc. degrees in Mechatronics Engineering from IIUM, Malaysia. His Ph.D. thesis focused on developing integrated control systems in precision measurement for variable deep-holes applying laser beam, optical components, CCD camera, servo, and stepper motors. The research was carried out under the Japanese Government Scholarship (MEXT).
Dr. Ali has attracted over $ 1.0 Million in research grants funded by internal and external organizations. He has published over 100 scientific papers in high-impact journals, top-tier conferences, and symposiums. He has supervised over 40 students including Ph.D. and M.Sc. thesis, as well as Capstone projects.
Dr. Ali achieved 1 silver and 1 bronze medals for his innovative technology at an international exhibition held in Malaysia. He has 1 patent (EPO) and 1 commercialized research output. He organized a special session at the FAIMS 2022 conference, USA. He has served as the session chair and technical program committee member of over 10 international conferences. He is also a regular reviewer of several high-impact journals.
Research interests
1. Linear/non-linear, Fuzzy, and Intelligent Control Systems
2. Industrial Automation
3. Mechatronic Systems Design and Development
4. Robotics, Sensor, Actuator, and UAV
5. Precision Engineering
6. Smart Manufacturing
7. Additive Manufacturing and 3D Printing
8. Digital Twin
Teaching
1. Control Systems
2. Industrial Automation
3. Modern Control Engineering
4. Engineering Dynamics
5. Numerical Methods in Engineering
6. Materials and Manufacturing I
Professional Information
Membership
1. Senior Member, IEEE
2. Member, IEEE Robotics and Automation Society
3. Member, IEEE Young Professionals
4. Member, IEEE Control Systems Society
5. IMechE, coordinator for Kazakhstan Chapter
6. IMechE SC, Advisor at Nazarbayev Univesrity
Fingerprint
- 1 Similar Profiles
Network
-
Data-Driven Digital Twin (DT) Framework for Additive Manufacturing
Shehab, E., Ali, M. H., Hashmi, M., Abibullaev, B., Erkoyuncu, J. A. & Mahmoud, K.
1/1/22 → 12/31/24
Project: FDCRGP
-
Synchronization analysis of shunting inhibitory cellular neural networks
1/1/22 → 12/31/24
Project: CRP
-
АР13068039: Development of next-generation 3D construction printer for geopolymers made from industrial by-products in Kazakhstan
Ali, M. H., Mukhametkaliyev, T., Baiharina, A., Satkhan, A., Iskakov, A., Temirzakuly, B., Sultangazin, S., Baigarina, A. & Bekbolat, A.
1/1/22 → 12/31/24
Project: MES RK
-
Design and Development of Next Generation Multi-material SLS-based 3D Printer (MMS3DP)
Ali, M. H., Shehab, E., Hu, J., Kurokawa, S., Mahmoud, K. & Kamal, M.
1/1/21 → 12/31/23
Project: FDCRGP
-
Optimal design and development of multi-nozzle and multi-material based lower cost 3D printer
Ali, M. H., Kurokawa, S., Zhao, Y., Samad Kamal, A. & Shariff Ullah, A.
3/20/18 → 4/30/21
Project: FDCRGP
-
3D Printed Large-Scale Insole and its Printing Challenges
Hazrat Ali, M., Trubayev, S. & Shehab, E., Jan 10 2023, 8th Brunei International Conference on Engineering and Technology 2021. Ali, M. Y., Karri, R. R., Shams, S., Rosli, R., Rahman, E. K. A. & Singh, R. (eds.). American Institute of Physics Inc., 050049. (AIP Conference Proceedings; vol. 2643).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Construction 3D printing: a critical review and future research directions
Baigarina, A., Shehab, E. & Ali, M. H., 2023, (Accepted/In press) In: Progress in Additive Manufacturing.Research output: Contribution to journal › Review article › peer-review
-
Development of a large-scale multi-extrusion FDM printer, and its challenges
Ali, M. H., Kurokawa, S., Shehab, E. & Mukhtarkhanov, M., Jun 2023, In: International Journal of Lightweight Materials and Manufacture. 6, 2, p. 198-213 16 p.Research output: Contribution to journal › Article › peer-review
Open Access -
Enhancing Mechanical Property of Multi-material Printed Object Through Machine-Learning
Ali, M. H., Sabyrov, N., Tanveer, M. H., Kurokawa, S. & Shehab, E., 2023, Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus - Proceedings of FAIM 2022. Kim, K-Y., Rickli, J. & Monplaisir, L. (eds.). Springer Science and Business Media Deutschland GmbH, p. 19-27 9 p. (Lecture Notes in Mechanical Engineering).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Investigation of Multi-material Composite Parts Manufactured by Multi-extrusion FDM Printer
Mukhtarkanov, M., Shehab, E., Tanveer, M. H., Araby, S. & Ali, M. H., 2023, Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus - Proceedings of FAIM 2022. Kim, K-Y., Rickli, J. & Monplaisir, L. (eds.). Springer Science and Business Media Deutschland GmbH, p. 12-18 7 p. (Lecture Notes in Mechanical Engineering).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution