• 115 Citations
  • 6 h-Index
20082020
If you made any changes in Pure these will be visible here soon.

Research Output 2008 2019

  • 115 Citations
  • 6 h-Index
  • 24 Conference contribution
  • 18 Article
  • 2 Conference article
  • 1 Review article
2019

3D printing: a critical review of current development and future prospects

Ali, M. H., Batai, S. & Sarbassov, D., Jan 1 2019, In : Rapid Prototyping Journal.

Research output: Contribution to journalReview article

Printing
3D printers
Topology
Mechanical properties
Processing

4D printing: a critical review of current developments, and future prospects

Ali, M. H., Abilgaziyev, A. & Adair, D., Jan 1 2019, (Accepted/In press) In : International Journal of Advanced Manufacturing Technology.

Research output: Contribution to journalArticle

3D printers
Printing
Topology
Mechanical properties
Processing

A comparative ANSYS-based force analysis of a new horizontal-axis semi-exposed wind turbine

Seitenov, D., Mir-Nasiri, N. & Ali, M. H., Jan 1 2019, In : Wind Engineering.

Research output: Contribution to journalArticle

Wind turbines
Turbomachine blades
Bearings (structural)
Wind power
Turbines

A new algorithm to control dynamic stability of higher-order systems

Mir-Nasiri, N. & Ali, M. H., Apr 8 2019, Proceedings - 8th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2018. Institute of Electrical and Electronics Engineers Inc., p. 53-58 6 p. 8684988. (Proceedings - 8th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Higher Order
Dynamic Systems
Dynamical systems
Characteristic polynomial
Coefficient
1 Citation (Scopus)

Composite materials property determination by Rule of Mixture and Monte Carlo Simulation

Yerbolat, G., Amangeldi, S., Ali, M. H., Badanova, N., Ashirbeok, A. & Islam, G., Jan 16 2019, Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018. Meen, T-H. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 384-387 4 p. 8615034. (Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Materials properties
3D printers
simulation
Composite materials
Printing

Development of an autonomous cupcake machine

Polichshuk, R., Khamzin, S., Mussin, K. & Ali, M. H., Feb 12 2019, 2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018. Institute of Electrical and Electronics Engineers Inc., p. 399-404 6 p. 8641035. (2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Customer Satisfaction
Microcontroller
Customer satisfaction
Production Systems
Microcontrollers

Material Optimization Method in 3D Printing

Ali, M. H., Yerbolat, G. & Amangeldi, S., Jan 16 2019, Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018. Meen, T-H. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 365-368 4 p. 8614886. (Proceedings of the 2018 IEEE International Conference on Advanced Manufacturing, ICAM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Printing
Materials properties
mechanical property
material
method
1 Citation (Scopus)

Mechanical property prediction method based on multi-material 3D printer

Yerbolat, G., Shynggys, A. & Ali, M. H., Feb 12 2019, 2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018. Institute of Electrical and Electronics Engineers Inc., p. 498-502 5 p. 8641073. (2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Mechanical Properties
Printing
Mechanical properties
Prediction

Parking gate control based on mobile application

Kasym, K., Sarsenen, A., Segizbayev, Z., Junuskaliyeva, D. & Ali, M. H., Feb 12 2019, 2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018. Institute of Electrical and Electronics Engineers Inc., p. 399-402 4 p. 8640954. (2018 Joint 7th International Conference on Informatics, Electronics and Vision and 2nd International Conference on Imaging, Vision and Pattern Recognition, ICIEV-IVPR 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mobile Applications
Parking
Application programs
Bluetooth
Mobile phones
1 Citation (Scopus)

Shape optimization for composite polymers in 3D printing

Ali, M. H., Yerbolat, G., Islam, G., Amangeldi, S. & Zhao, M. Y., Apr 1 2019, In : International Journal of Innovative Technology and Exploring Engineering. 8, 6, p. 55-61 7 p.

Research output: Contribution to journalArticle

Shape optimization
Printing
Composite materials
Polymers
Composite structures
2018

Challenges for flood risk management in flood-prone Sirajganj region of Bangladesh

Ali, M. H., Bhattacharya, B., Islam, A. K. M. S., Islam, G. M. T., Hossain, M. S. & Khan, A. S., Jan 1 2018, (Accepted/In press) In : Journal of Flood Risk Management.

Research output: Contribution to journalArticle

Risk management
risk management
Bangladesh
natural disaster
damages

Modelling surface runoff in a large-scale paddy field in Malaysia

Ali, M. H., Bhattacharya, B. & Katimon, A., Jan 1 2018, In : International Journal of Hydrology Science and Technology. 8, 1, p. 69-90 22 p.

Research output: Contribution to journalArticle

Runoff
paddy field
runoff
modeling
Irrigation
2 Citations (Scopus)

Portable Autonomous Window Cleaning Robot

Mir-Nasiri, N., Hudyjaya Siswoyo, J. & Ali, M. H., Jan 1 2018, In : Procedia Computer Science. 133, p. 197-204 8 p.

Research output: Contribution to journalConference article

Cleaning
Robots
Pulleys
Office buildings
Optical sensors
1 Citation (Scopus)

Vision-based Robot Manipulator for Industrial Applications

Ali, M. H., Aizat, K., Yerkhan, K., Zhandos, T. & Anuar, O., Jan 1 2018, In : Procedia Computer Science. 133, p. 205-212 8 p.

Research output: Contribution to journalConference article

Industrial applications
Manipulators
Robots
Cameras
Grippers
2017
2 Citations (Scopus)
Active suspension systems
Railroad cars
Damping
Controllers
Vehicle suspensions

Design of an Automated Pepper Sorting Machine

Ali, M. H. & Mir-Nasiri, N., Jun 7 2017, 2017 3rd International Conference on Control, Automation and Robotics, ICCAR 2017. Institute of Electrical and Electronics Engineers Inc., p. 622-626 5 p. 7942772

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sorting
Suction
Gantry cranes
Pulleys
Microcontroller
3 Citations (Scopus)

Development of Arduino glove-based autonomous car

Ruslan, T., Yerden, K. & Ali, M. H., Nov 13 2017, 2017 21st International Conference on System Theory, Control and Computing, ICSTCC 2017. Institute of Electrical and Electronics Engineers Inc., p. 212-216 5 p. 8107036

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Railroad cars
Sensor
Sensors
Human computer interaction
Costs

Efficient human motion detection with adaptive background for vision-based security system

Zaman, F. H. K., Ali, M. H., Shafie, A. A. & Rizman, Z. I., Jan 1 2017, In : International Journal on Advanced Science, Engineering and Information Technology. 7, 3, p. 1026-1031 6 p.

Research output: Contribution to journalArticle

Security systems
Pixels
Cameras
Image compression
Noise abatement
2016

Camera based monitoring system for deep hole measurement

Ali, M. H. & Katsuki, A., Jan 18 2016, IEEM 2015 - 2015 IEEE International Conference on Industrial Engineering and Engineering Management. IEEE Computer Society, Vol. 2016-January. p. 109-114 6 p. 7385618

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cameras
Monitoring
Units of measurement
Security systems
Monitoring system
1 Citation (Scopus)

Small scale sun tracking power plant

Mir-Nasiri, N. & Ali, M. H., Nov 28 2016, 2016 5th International Conference on Informatics, Electronics and Vision, ICIEV 2016. Institute of Electrical and Electronics Engineers Inc., p. 281-286 6 p. 7760011

Research output: Chapter in Book/Report/Conference proceedingConference contribution

power plants
Sun
Solar energy
Power plants
sun
2015
1 Citation (Scopus)

Automated secure room system

Ali, M. H., Kamaruzaman, F., Rahman, M. A. & Shafie, A. A., Nov 20 2015, 2015 4th International Conference on Software Engineering and Computer Systems, ICSECS 2015: Virtuous Software Solutions for Big Data. Institute of Electrical and Electronics Engineers Inc., p. 73-78 6 p. 7333086

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Security systems
Geometry
Experiments
3 Citations (Scopus)

Design and development of multi-nozzle extrusion system for 3D printer

Abilgaziyev, A., Kulzhan, T., Raissov, N., Ali, M. H., Match, W. L. K. O. & Mir-Nasiri, N., Nov 20 2015, 2015 4th International Conference on Informatics, Electronics and Vision, ICIEV 2015. Institute of Electrical and Electronics Engineers Inc., 7333982

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Extrusion
Printing
Nozzles
Color

Development of 3D printer with integrated temperature control system

Mir-Nasiri, N., Ali, M. H. & Kurokawa, S., Nov 20 2015, 2015 4th International Conference on Informatics, Electronics and Vision, ICIEV 2015. Institute of Electrical and Electronics Engineers Inc., 7333996

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Integrated control
Temperature control
Conceptual design
Control systems

Development of a laser-guided deep small-sized hole-measurement system: Measurement accuracy

Katsuki, A., Sajima, T., Murakami, H., Hazrat, A. M., Ohnishi, O. & Akashi, K., 2015, Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015. euspen, p. 201-202 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lasers
lasers
Units of measurement
Measurement errors
Optical systems
12 Citations (Scopus)

Multi-nozzle extrusion system for 3D printer and its control mechanism

Ali, M. H., Mir-Nasiri, N. & Ko, W. L., Dec 30 2015, (Accepted/In press) In : International Journal of Advanced Manufacturing Technology. p. 1-12 12 p.

Research output: Contribution to journalArticle

3D printers
Extrusion
Nozzles
Printing
Color
2014
7 Citations (Scopus)

Application of machine vision in improving safety and reliability for gear profile measurement

Ali, M. H., Kurokawa, S. & Uesugi, K., 2014, In : Machine Vision and Applications. 25, 6, p. 1549-1559 11 p.

Research output: Contribution to journalArticle

Computer vision
Gears
Cameras
Precision engineering
Gear teeth
8 Citations (Scopus)

Camera based precision measurement in improving measurement accuracy

Hazrat Ali, M., Kurokawa, S. & Uesugi, K., Mar 2014, In : Measurement: Journal of the International Measurement Confederation. 49, 1, p. 138-147 10 p.

Research output: Contribution to journalArticle

Camera
Cameras
cameras
Performance Measurement
Measurement System
2013
6 Citations (Scopus)

Autonomous road surveillance system: A proposed model for vehicle detection and traffic signal control

Ali, M. H., Kurokawa, S. & Shafie, A. A., 2013, Procedia Computer Science. Elsevier, Vol. 19. p. 963-970 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Traffic signals
Traffic control
Control systems
Statistics
1 Citation (Scopus)

Camera based 3D probe control in measuring gear profile

Ali, M. H., Kurokawa, S. & Uesugi, K., 2013, Proceedings - 2013 2nd International Conference on Robot, Vision and Signal Processing, RVSP 2013. IEEE Computer Society, p. 242-246 5 p. 6830022

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Cameras
Measurement errors
Control theory
Computer systems
1 Citation (Scopus)

Control strategy of developed mechanical actuator in measuring hole surface parameter

Ali, M. H., Katsuki, A., Sajima, T., Murakami, H. & Kurokawa, S., 2013, (Accepted/In press) In : International Journal of Advanced Manufacturing Technology. p. 1-10 10 p.

Research output: Contribution to journalArticle

Mechanical actuators
Actuators
Units of measurement
Optical systems
Interferometers
1 Citation (Scopus)

Design of mechanical actuator in 3D CAD software

Ali, H., Katsuki, A., Kurokawa, S. & Sajima, T., 2013, Procedia Engineering. Vol. 64. p. 473-478 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mechanical actuators
Computer aided design
Measurement errors
Industry
Costs

Development of a laser-guided deep-hole measurement system: Adjustment to a small size

K, A., Ali, M. D. H., S, T., Hiroshi, M., O, O. & K, S., 2013, Proceedings of the 28th Annual Meeting of the American Society for Precision Engineering, ASPE 2013. p. 431-436 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

laser
Lasers
5 Citations (Scopus)

Vision based measurement system for gear profile

Ali, M. H., Kurokawa, S. & Uesugi, K., 2013, 2013 International Conference on Informatics, Electronics and Vision, ICIEV 2013. 6572652

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gears
Precision engineering
Measurement errors
Inspection
Cameras
2012
1 Citation (Scopus)

Development of mechanical actuator for deep-hole measurement system

Ali, M. H., Katsuki, A., Sajima, T., Murakami, H. & Kurokawa, S., 2012, Communications in Computer and Information Science. Vol. 330 CCIS. p. 280-287 8 p. (Communications in Computer and Information Science; vol. 330 CCIS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mechanical actuators
Actuators
Optical systems
Interferometers
Semiconductor lasers
2011
1 Citation (Scopus)

Development of a laser-guided deep-hole evaluating system

Katsuki, A., Onikura, H., Sajima, T., Murakami, H., Doi, T., Sato, T., Nishi, H., Pietri, V. & Ali, M. H., Oct 2011, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 77, 10, p. 977-984 8 p.

Research output: Contribution to journalArticle

Units of measurement
Lasers
Skids
Prisms
Interferometers
1 Citation (Scopus)

Development of a laser-guided deep-hole measurement system with high-performance mechanical actuators

Katsuki, A., Sato, T., Ali, H., Sajima, T., Murakami, H., Berjaud, A., Ohnishi, O. & Doi, T., 2011, Proceedings - ASPE 2011 Annual Meeting. Vol. 52. p. 488-491 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mechanical actuators
Lasers
7 Citations (Scopus)

Smart video surveillance system for vehicle detection and traffic flow control

Shafie, A. A., Ali, M. H., Hafiz, F. & Ali, R. M., Aug 2011, In : Journal of Engineering Science and Technology. 6, 4, p. 469-480 12 p.

Research output: Contribution to journalArticle

Flow control
Traffic signals
Traffic control
Railroad cars
Statistics
3 Citations (Scopus)

Study on high-speed on-machine measurement of deep-hole accuracy

Katsuki, A., Onikura, H., Sajima, T., Murakami, H., Sato, T., Caetano, T., Ali, H. & Ohnishi, O., Jul 2011, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 77, 7, p. 681-687 7 p.

Research output: Contribution to journalArticle

Lathes
Boring machines (machine tools)
Drilling machines (machine tools)
Machining centers
Units of measurement
2010
3 Citations (Scopus)

Advance video analysis system and its applications

Ali, M. H., Shafie, A. A., Hafiz, F. & Ali, R. M., 2010, In : European Journal of Scientific Research. 41, 1, p. 72-83 12 p.

Research output: Contribution to journalArticle

Video Analysis
systems analysis
Software
Research
monitoring
2 Citations (Scopus)

Development of a flexible video analysis system for motion detection and alarm generation

Shafie, A. A., Ali, M. H., Hafiz, F. & Ali, R. M., 2010, International Conference on Computer and Communication Engineering, ICCCE'10. 5556768

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cameras
Railroad cars
Lighting
Processing
Costs
9 Citations (Scopus)

Foreground segmentation-based human detection with shadow removal

Hafiz, F., Shafie, A. A., Khalifa, O. & Ali, M. H., 2010, International Conference on Computer and Communication Engineering, ICCCE'10. 5556763

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Processing
2009

Development of an efficient CVT using electromecanical System

Shafie, A. A. & Ali, M. H., Aug 2009, In : World Academy of Science, Engineering and Technology. 56, p. 555-558 4 p.

Research output: Contribution to journalArticle

Pulleys
Gears
Lead screws
Clamping devices
Energy utilization
1 Citation (Scopus)

Development of autonomous line-following soccer robots

Shafie, A. A., Alias, M. F. & Ali, M. H., Aug 2009, In : World Academy of Science, Engineering and Technology. 56, p. 562-564 3 p.

Research output: Contribution to journalArticle

Microcontrollers
Robots
DC motors
Resistors
Mobile robots
30 Citations (Scopus)

Motion detection techniques using optical flow

Shafie, A. A., Hafiz, F. & Ali, M. H., Aug 2009, In : World Academy of Science, Engineering and Technology. 56, p. 559-561 3 p.

Research output: Contribution to journalArticle

Optical flows
Flow velocity
Luminance
Image processing
2008

Damage index: Assessment of mould growth on building materials using digital image processing technique

Bamgbopa, I. A., Aibinu, A. M., Salami, M. J. E., Shafie, A., Ali, M. & Jahn Kassim, P. S., 2008, Proceedings of the International Conference on Computer and Communication Engineering 2008, ICCCE08: Global Links for Human Development. p. 584-588 5 p. 4580671

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Image processing
Inspection
Health
Image segmentation
Dams