A study of the performance of the LSWA CO 2 EOR technique on improvement of oil recovery in sandstones

H. Al-Abri, P. Pourafshary, N. Mosavat, H. Al Hadhrami

Research output: Contribution to journalArticle

Abstract

Low salinity water is an emerging enhanced oil recovery (EOR) method that causes wettability alteration towards a favorable state to reduce residual oil saturation, while water alternating gas (WAG) is a proven EOR process that enhances oil recovery by controlling mobility of both water and gas. Therefore, combining the two EOR processes as low salinity water-alternating CO 2 EOR injection (LSWA CO 2 ) can further improve oil recovery by promoting the synergy of the mechanisms underlying these two methods. Core flooding experiments, contact angle, interfacial tension (IFT), and CO 2 solubility measurement in oil and brine were conducted to investigate the viability and performance of LSWA CO 2 in sandstone reservoirs. A favorable wettability alteration, along with IFT reduction and mobility control, are the mechanisms that contribute to residual oil mobilization efficiencies during the LSWA CO 2 EOR process. In addition, LSWA CO 2 core flooding experiments result in a significant incremental oil recovery. Three smart waters were tested in our research, to examine the impact of changing cationic composition on oil recovery. The solutions are designed brines as NaCl (SW1), MgCl 2 (SW2), and KCl (SW3). Of the three solutions, SW1 yields the highest incremental oil recovery and highest IFT reduction. In addition, it results in a favorable wettability alteration towards a more water-wet state. In all cases, introducing CO 2 to the brine/oil system shows a great advantage in terms of enhancing wettability modification, promoting IFT reduction, and controlling the displacement front of the injected fluid through mobility control.
Original languageEnglish
Pages (from-to)58-66
Number of pages9
JournalPetroleum
Volume5
Issue number1
DOIs
Publication statusPublished - Mar 1 2019

Fingerprint

enhanced oil recovery
Carbon Monoxide
Sandstone
Oils
sandstone
Recovery
Water
oil
wettability
Surface tension
Wetting
brine
flooding
water salinity
water
recovery method
gas
Gases
mobilization
Brines

Cite this

A study of the performance of the LSWA CO 2 EOR technique on improvement of oil recovery in sandstones. / Al-Abri, H.; Pourafshary, P.; Mosavat, N.; Al Hadhrami, H.

In: Petroleum, Vol. 5, No. 1, 01.03.2019, p. 58-66.

Research output: Contribution to journalArticle

Al-Abri, H. ; Pourafshary, P. ; Mosavat, N. ; Al Hadhrami, H. / A study of the performance of the LSWA CO 2 EOR technique on improvement of oil recovery in sandstones. In: Petroleum. 2019 ; Vol. 5, No. 1. pp. 58-66.
@article{ffeba8a9db7e4963bd0293b3a4c55775,
title = "A study of the performance of the LSWA CO 2 EOR technique on improvement of oil recovery in sandstones",
abstract = "Low salinity water is an emerging enhanced oil recovery (EOR) method that causes wettability alteration towards a favorable state to reduce residual oil saturation, while water alternating gas (WAG) is a proven EOR process that enhances oil recovery by controlling mobility of both water and gas. Therefore, combining the two EOR processes as low salinity water-alternating CO 2 EOR injection (LSWA CO 2 ) can further improve oil recovery by promoting the synergy of the mechanisms underlying these two methods. Core flooding experiments, contact angle, interfacial tension (IFT), and CO 2 solubility measurement in oil and brine were conducted to investigate the viability and performance of LSWA CO 2 in sandstone reservoirs. A favorable wettability alteration, along with IFT reduction and mobility control, are the mechanisms that contribute to residual oil mobilization efficiencies during the LSWA CO 2 EOR process. In addition, LSWA CO 2 core flooding experiments result in a significant incremental oil recovery. Three smart waters were tested in our research, to examine the impact of changing cationic composition on oil recovery. The solutions are designed brines as NaCl (SW1), MgCl 2 (SW2), and KCl (SW3). Of the three solutions, SW1 yields the highest incremental oil recovery and highest IFT reduction. In addition, it results in a favorable wettability alteration towards a more water-wet state. In all cases, introducing CO 2 to the brine/oil system shows a great advantage in terms of enhancing wettability modification, promoting IFT reduction, and controlling the displacement front of the injected fluid through mobility control.",
author = "H. Al-Abri and P. Pourafshary and N. Mosavat and {Al Hadhrami}, H.",
year = "2019",
month = "3",
day = "1",
doi = "10.1016/j.petlm.2018.07.003",
language = "English",
volume = "5",
pages = "58--66",
journal = "Petroleum",
issn = "2405-6561",
publisher = "KeAi Communications Co",
number = "1",

}

TY - JOUR

T1 - A study of the performance of the LSWA CO 2 EOR technique on improvement of oil recovery in sandstones

AU - Al-Abri, H.

AU - Pourafshary, P.

AU - Mosavat, N.

AU - Al Hadhrami, H.

PY - 2019/3/1

Y1 - 2019/3/1

N2 - Low salinity water is an emerging enhanced oil recovery (EOR) method that causes wettability alteration towards a favorable state to reduce residual oil saturation, while water alternating gas (WAG) is a proven EOR process that enhances oil recovery by controlling mobility of both water and gas. Therefore, combining the two EOR processes as low salinity water-alternating CO 2 EOR injection (LSWA CO 2 ) can further improve oil recovery by promoting the synergy of the mechanisms underlying these two methods. Core flooding experiments, contact angle, interfacial tension (IFT), and CO 2 solubility measurement in oil and brine were conducted to investigate the viability and performance of LSWA CO 2 in sandstone reservoirs. A favorable wettability alteration, along with IFT reduction and mobility control, are the mechanisms that contribute to residual oil mobilization efficiencies during the LSWA CO 2 EOR process. In addition, LSWA CO 2 core flooding experiments result in a significant incremental oil recovery. Three smart waters were tested in our research, to examine the impact of changing cationic composition on oil recovery. The solutions are designed brines as NaCl (SW1), MgCl 2 (SW2), and KCl (SW3). Of the three solutions, SW1 yields the highest incremental oil recovery and highest IFT reduction. In addition, it results in a favorable wettability alteration towards a more water-wet state. In all cases, introducing CO 2 to the brine/oil system shows a great advantage in terms of enhancing wettability modification, promoting IFT reduction, and controlling the displacement front of the injected fluid through mobility control.

AB - Low salinity water is an emerging enhanced oil recovery (EOR) method that causes wettability alteration towards a favorable state to reduce residual oil saturation, while water alternating gas (WAG) is a proven EOR process that enhances oil recovery by controlling mobility of both water and gas. Therefore, combining the two EOR processes as low salinity water-alternating CO 2 EOR injection (LSWA CO 2 ) can further improve oil recovery by promoting the synergy of the mechanisms underlying these two methods. Core flooding experiments, contact angle, interfacial tension (IFT), and CO 2 solubility measurement in oil and brine were conducted to investigate the viability and performance of LSWA CO 2 in sandstone reservoirs. A favorable wettability alteration, along with IFT reduction and mobility control, are the mechanisms that contribute to residual oil mobilization efficiencies during the LSWA CO 2 EOR process. In addition, LSWA CO 2 core flooding experiments result in a significant incremental oil recovery. Three smart waters were tested in our research, to examine the impact of changing cationic composition on oil recovery. The solutions are designed brines as NaCl (SW1), MgCl 2 (SW2), and KCl (SW3). Of the three solutions, SW1 yields the highest incremental oil recovery and highest IFT reduction. In addition, it results in a favorable wettability alteration towards a more water-wet state. In all cases, introducing CO 2 to the brine/oil system shows a great advantage in terms of enhancing wettability modification, promoting IFT reduction, and controlling the displacement front of the injected fluid through mobility control.

UR - http://www.mendeley.com/research/study-performance-lswa-co-2-eor-technique-improvement-oil-recovery-sandstones

U2 - 10.1016/j.petlm.2018.07.003

DO - 10.1016/j.petlm.2018.07.003

M3 - Article

VL - 5

SP - 58

EP - 66

JO - Petroleum

JF - Petroleum

SN - 2405-6561

IS - 1

ER -