Application of transfer functions to model water injection in hydrocarbon reservoir

Mohammad Sayyafzadeh, Peyman Pourafshary, Manouchehr Haghighi, Fariborz Rashidi

Research output: Contribution to journalArticle

11 Citations (Scopus)

Abstract

Water flooding is one of the most economical methods to increase oil recovery. In order to improve the ultimate oil recovery during waterflooding, it is essential to provide an accurate forecast of reservoir performance. Hence, various methods have been utilized to simulate reservoirs. Although grid-based simulation is the most common and accurate method, time-consuming computation and the demand for large quantities of data restrict the use of this method. Sometimes, a quick overview of reservoir performance is sufficient or all required data are not accessible. Therefore, in this study a fast simulator is introduced to provide a quick overview with the minimum amount of data.A new method is presented to forecast the performance of water injection based on Transfer Function (TF). In this approach, it is assumed that a reservoir consists of a combination of TFs. The order and arrangement of TFs are chosen based on the physical conditions of the reservoir which are ascertained by examining several cases. The selected arrangement and orders can be extended to any other reservoirs. Injection and production rates act as input and output signals to these TFs, respectively. After analyzing input and output signals, the unknown parameters of TFs are calculated. Subsequently, it is possible to predict reservoir performance.Four different cases are employed to validate the derived equation. The results reveal a good agreement with those obtained from the common grid-based simulators. In addition, it has been demonstrated that the TF parameters depend on the characteristics and the pattern of different sections of the reservoir.This approach is a quick way to forecast waterflooding performance and can be a new window for the future of fast simulators. It provides the prediction with higher certainty in comparison with the other fast simulators. Furthermore, the only requirements for the method are injection and production rates. The analytical solution of the method enables its utilization in finding optimum rates for water injection in a short period of time. The method also presents some key parameters such as well connectivity. The use of the model is limited to situations when a rapid estimation is looked for and/or adequate data is not accessible.

Original languageEnglish
Pages (from-to)139-148
Number of pages10
JournalJournal of Petroleum Science and Engineering
Volume78
Issue number1
DOIs
Publication statusPublished - Jul 1 2011
Externally publishedYes

Fingerprint

Water injection
hydrocarbon reservoir
transfer function
Transfer functions
Simulators
Hydrocarbons
Well flooding
simulator
Recovery
water
method
oil
connectivity
Water
flooding
Oils
prediction

Keywords

  • Injection rates
  • Rapid estimation
  • Reservoir simulation
  • Transfer functions
  • Water flooding
  • Well connectivity

ASJC Scopus subject areas

  • Fuel Technology
  • Geotechnical Engineering and Engineering Geology

Cite this

Application of transfer functions to model water injection in hydrocarbon reservoir. / Sayyafzadeh, Mohammad; Pourafshary, Peyman; Haghighi, Manouchehr; Rashidi, Fariborz.

In: Journal of Petroleum Science and Engineering, Vol. 78, No. 1, 01.07.2011, p. 139-148.

Research output: Contribution to journalArticle

Sayyafzadeh, Mohammad ; Pourafshary, Peyman ; Haghighi, Manouchehr ; Rashidi, Fariborz. / Application of transfer functions to model water injection in hydrocarbon reservoir. In: Journal of Petroleum Science and Engineering. 2011 ; Vol. 78, No. 1. pp. 139-148.
@article{ce2696a428bb4ca480ef65410e493616,
title = "Application of transfer functions to model water injection in hydrocarbon reservoir",
abstract = "Water flooding is one of the most economical methods to increase oil recovery. In order to improve the ultimate oil recovery during waterflooding, it is essential to provide an accurate forecast of reservoir performance. Hence, various methods have been utilized to simulate reservoirs. Although grid-based simulation is the most common and accurate method, time-consuming computation and the demand for large quantities of data restrict the use of this method. Sometimes, a quick overview of reservoir performance is sufficient or all required data are not accessible. Therefore, in this study a fast simulator is introduced to provide a quick overview with the minimum amount of data.A new method is presented to forecast the performance of water injection based on Transfer Function (TF). In this approach, it is assumed that a reservoir consists of a combination of TFs. The order and arrangement of TFs are chosen based on the physical conditions of the reservoir which are ascertained by examining several cases. The selected arrangement and orders can be extended to any other reservoirs. Injection and production rates act as input and output signals to these TFs, respectively. After analyzing input and output signals, the unknown parameters of TFs are calculated. Subsequently, it is possible to predict reservoir performance.Four different cases are employed to validate the derived equation. The results reveal a good agreement with those obtained from the common grid-based simulators. In addition, it has been demonstrated that the TF parameters depend on the characteristics and the pattern of different sections of the reservoir.This approach is a quick way to forecast waterflooding performance and can be a new window for the future of fast simulators. It provides the prediction with higher certainty in comparison with the other fast simulators. Furthermore, the only requirements for the method are injection and production rates. The analytical solution of the method enables its utilization in finding optimum rates for water injection in a short period of time. The method also presents some key parameters such as well connectivity. The use of the model is limited to situations when a rapid estimation is looked for and/or adequate data is not accessible.",
keywords = "Injection rates, Rapid estimation, Reservoir simulation, Transfer functions, Water flooding, Well connectivity",
author = "Mohammad Sayyafzadeh and Peyman Pourafshary and Manouchehr Haghighi and Fariborz Rashidi",
year = "2011",
month = "7",
day = "1",
doi = "10.1016/j.petrol.2011.05.009",
language = "English",
volume = "78",
pages = "139--148",
journal = "Journal of Petroleum Science and Engineering",
issn = "0920-4105",
publisher = "Elsevier",
number = "1",

}

TY - JOUR

T1 - Application of transfer functions to model water injection in hydrocarbon reservoir

AU - Sayyafzadeh, Mohammad

AU - Pourafshary, Peyman

AU - Haghighi, Manouchehr

AU - Rashidi, Fariborz

PY - 2011/7/1

Y1 - 2011/7/1

N2 - Water flooding is one of the most economical methods to increase oil recovery. In order to improve the ultimate oil recovery during waterflooding, it is essential to provide an accurate forecast of reservoir performance. Hence, various methods have been utilized to simulate reservoirs. Although grid-based simulation is the most common and accurate method, time-consuming computation and the demand for large quantities of data restrict the use of this method. Sometimes, a quick overview of reservoir performance is sufficient or all required data are not accessible. Therefore, in this study a fast simulator is introduced to provide a quick overview with the minimum amount of data.A new method is presented to forecast the performance of water injection based on Transfer Function (TF). In this approach, it is assumed that a reservoir consists of a combination of TFs. The order and arrangement of TFs are chosen based on the physical conditions of the reservoir which are ascertained by examining several cases. The selected arrangement and orders can be extended to any other reservoirs. Injection and production rates act as input and output signals to these TFs, respectively. After analyzing input and output signals, the unknown parameters of TFs are calculated. Subsequently, it is possible to predict reservoir performance.Four different cases are employed to validate the derived equation. The results reveal a good agreement with those obtained from the common grid-based simulators. In addition, it has been demonstrated that the TF parameters depend on the characteristics and the pattern of different sections of the reservoir.This approach is a quick way to forecast waterflooding performance and can be a new window for the future of fast simulators. It provides the prediction with higher certainty in comparison with the other fast simulators. Furthermore, the only requirements for the method are injection and production rates. The analytical solution of the method enables its utilization in finding optimum rates for water injection in a short period of time. The method also presents some key parameters such as well connectivity. The use of the model is limited to situations when a rapid estimation is looked for and/or adequate data is not accessible.

AB - Water flooding is one of the most economical methods to increase oil recovery. In order to improve the ultimate oil recovery during waterflooding, it is essential to provide an accurate forecast of reservoir performance. Hence, various methods have been utilized to simulate reservoirs. Although grid-based simulation is the most common and accurate method, time-consuming computation and the demand for large quantities of data restrict the use of this method. Sometimes, a quick overview of reservoir performance is sufficient or all required data are not accessible. Therefore, in this study a fast simulator is introduced to provide a quick overview with the minimum amount of data.A new method is presented to forecast the performance of water injection based on Transfer Function (TF). In this approach, it is assumed that a reservoir consists of a combination of TFs. The order and arrangement of TFs are chosen based on the physical conditions of the reservoir which are ascertained by examining several cases. The selected arrangement and orders can be extended to any other reservoirs. Injection and production rates act as input and output signals to these TFs, respectively. After analyzing input and output signals, the unknown parameters of TFs are calculated. Subsequently, it is possible to predict reservoir performance.Four different cases are employed to validate the derived equation. The results reveal a good agreement with those obtained from the common grid-based simulators. In addition, it has been demonstrated that the TF parameters depend on the characteristics and the pattern of different sections of the reservoir.This approach is a quick way to forecast waterflooding performance and can be a new window for the future of fast simulators. It provides the prediction with higher certainty in comparison with the other fast simulators. Furthermore, the only requirements for the method are injection and production rates. The analytical solution of the method enables its utilization in finding optimum rates for water injection in a short period of time. The method also presents some key parameters such as well connectivity. The use of the model is limited to situations when a rapid estimation is looked for and/or adequate data is not accessible.

KW - Injection rates

KW - Rapid estimation

KW - Reservoir simulation

KW - Transfer functions

KW - Water flooding

KW - Well connectivity

UR - http://www.scopus.com/inward/record.url?scp=80052299830&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80052299830&partnerID=8YFLogxK

U2 - 10.1016/j.petrol.2011.05.009

DO - 10.1016/j.petrol.2011.05.009

M3 - Article

AN - SCOPUS:80052299830

VL - 78

SP - 139

EP - 148

JO - Journal of Petroleum Science and Engineering

JF - Journal of Petroleum Science and Engineering

SN - 0920-4105

IS - 1

ER -