Asymmetrical track-etched membranes prepared by double-sided irradiation on the DC-60 cyclotron

A. E. Kurakhmedov; I. A. Ivanov; V. V. Aleksandrenko; A. L. Kozlovskiy; Yelyzaveta Arkhangelsky; M. V. Zdorovets

doi:10.1134/S0965544117060056

Asymmetrical track-etched membranes prepared by double-sided irradiation on the DC-60 cyclotron

A. E. Kurakhmedov, I. A. Ivanov, V. V. Aleksandrenko, A. L. Kozlovskiy, Yelyzaveta Arkhangelsky, M. V. Zdorovets

Department of Civil and Environmental Engineering

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

Abstract

Asymmetric track-etched membranes based on polyethylene terephthalate have been prepared using two-sided irradiation on the heavy-ion accelerator DC-60. A process for cyclotron adjustment to bombardment of a polymer material has been described. A procedure for preparing asymmetric track-etched membranes with different pore lengths and sizes has been specified. The strength characteristics of the resulting membrane have been evaluated. It has been shown that the membrane can be used in processes in which the driving force is hydraulic or osmotic pressure.

Original language	English
Pages (from-to)	489-497
Number of pages	9
Journal	Petroleum Chemistry
Volume	57
Issue number	6
DOIs	https://doi.org/10.1134/S0965544117060056
Publication status	Published - 2017

Keywords

asymmetric track-etched membranes
cyclotron
hydraulic pressure
osmotic pressure
polyethylene terephthalate

ASJC Scopus subject areas

General Chemistry
General Chemical Engineering
Fuel Technology
Energy Engineering and Power Technology
Geochemistry and Petrology

Access to Document

10.1134/S0965544117060056

Cite this

@article{91964a18285741878cbcb3758eea32e7,

title = "Asymmetrical track-etched membranes prepared by double-sided irradiation on the DC-60 cyclotron",

abstract = "Asymmetric track-etched membranes based on polyethylene terephthalate have been prepared using two-sided irradiation on the heavy-ion accelerator DC-60. A process for cyclotron adjustment to bombardment of a polymer material has been described. A procedure for preparing asymmetric track-etched membranes with different pore lengths and sizes has been specified. The strength characteristics of the resulting membrane have been evaluated. It has been shown that the membrane can be used in processes in which the driving force is hydraulic or osmotic pressure.",

keywords = "asymmetric track-etched membranes, cyclotron, hydraulic pressure, osmotic pressure, polyethylene terephthalate",

author = "Kurakhmedov, {A. E.} and Ivanov, {I. A.} and Aleksandrenko, {V. V.} and Kozlovskiy, {A. L.} and Yelyzaveta Arkhangelsky and Zdorovets, {M. V.}",

note = "Publisher Copyright: {\textcopyright} 2017, Pleiades Publishing, Ltd.",

year = "2017",

doi = "10.1134/S0965544117060056",

language = "English",

volume = "57",

pages = "489--497",

journal = "Petroleum Chemistry",

issn = "0965-5441",

publisher = "Maik Nauka-Interperiodica Publishing",

number = "6",

}

TY - JOUR

T1 - Asymmetrical track-etched membranes prepared by double-sided irradiation on the DC-60 cyclotron

AU - Kurakhmedov, A. E.

AU - Ivanov, I. A.

AU - Aleksandrenko, V. V.

AU - Kozlovskiy, A. L.

AU - Arkhangelsky, Yelyzaveta

AU - Zdorovets, M. V.

PY - 2017

Y1 - 2017

N2 - Asymmetric track-etched membranes based on polyethylene terephthalate have been prepared using two-sided irradiation on the heavy-ion accelerator DC-60. A process for cyclotron adjustment to bombardment of a polymer material has been described. A procedure for preparing asymmetric track-etched membranes with different pore lengths and sizes has been specified. The strength characteristics of the resulting membrane have been evaluated. It has been shown that the membrane can be used in processes in which the driving force is hydraulic or osmotic pressure.

AB - Asymmetric track-etched membranes based on polyethylene terephthalate have been prepared using two-sided irradiation on the heavy-ion accelerator DC-60. A process for cyclotron adjustment to bombardment of a polymer material has been described. A procedure for preparing asymmetric track-etched membranes with different pore lengths and sizes has been specified. The strength characteristics of the resulting membrane have been evaluated. It has been shown that the membrane can be used in processes in which the driving force is hydraulic or osmotic pressure.

KW - asymmetric track-etched membranes

KW - cyclotron

KW - hydraulic pressure

KW - osmotic pressure

KW - polyethylene terephthalate

UR - http://www.scopus.com/inward/record.url?scp=85020821674&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85020821674&partnerID=8YFLogxK

U2 - 10.1134/S0965544117060056

DO - 10.1134/S0965544117060056

M3 - Article

AN - SCOPUS:85020821674

SN - 0965-5441

VL - 57

SP - 489

EP - 497

JO - Petroleum Chemistry

JF - Petroleum Chemistry

IS - 6

ER -

Asymmetrical track-etched membranes prepared by double-sided irradiation on the DC-60 cyclotron

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this