TY - GEN
T1 - BESS Sizing in an Isolated Microgrid Including PREVs and RERs
AU - Fouladi, Ehsan
AU - Baghaee, Hamid Reza
AU - Bagheri, Mehdi
AU - Lu, Maxim
AU - Gharehpetian, G. B.
N1 - Funding Information:
This research was supported by the targeted state program BR05236524 “Innovative Materials and Systems for Energy Conversion and Storage” from the Ministry of Education and Science of the Republic of Kazakhstan for 2018-2020.
Publisher Copyright:
© 2020 IEEE.
Copyright:
Copyright 2020 Elsevier B.V., All rights reserved.
PY - 2020/6
Y1 - 2020/6
N2 - In isolated microgrids (MGs), including plug-in hybrid electric vehicles (PHEVs) and renewable energy resources (RERs) sizing of battery energy storage systems (BESSs) is critical since MGs do not have the support of upstream utility grid in isolated mode. Hence, this paper suggests a sizing scheme for BESSs in an isolated MG, including PHEVs and RERs. The aim of the proposed scheme is continuously feeding all the load of the MG without any load shedding. In this paper, the load profile of the MG and output power of distributed generation (DG) units are calculated for four different seasons, and then, maximum rated power of the BESS is determined based on the load profile as well as the output power of DGs. To verify the effectiveness of the proposed scheme in sizing a BESS in an isolated MG in the presence of PHEVs and RERs with intermittent output power, we implemented it on the modified version of IEEE 33-bus test system which is being operated in isolated mode.
AB - In isolated microgrids (MGs), including plug-in hybrid electric vehicles (PHEVs) and renewable energy resources (RERs) sizing of battery energy storage systems (BESSs) is critical since MGs do not have the support of upstream utility grid in isolated mode. Hence, this paper suggests a sizing scheme for BESSs in an isolated MG, including PHEVs and RERs. The aim of the proposed scheme is continuously feeding all the load of the MG without any load shedding. In this paper, the load profile of the MG and output power of distributed generation (DG) units are calculated for four different seasons, and then, maximum rated power of the BESS is determined based on the load profile as well as the output power of DGs. To verify the effectiveness of the proposed scheme in sizing a BESS in an isolated MG in the presence of PHEVs and RERs with intermittent output power, we implemented it on the modified version of IEEE 33-bus test system which is being operated in isolated mode.
KW - Battery energy storage system
KW - Distributed generation
KW - Isolated
KW - Microgrid
KW - Off-grid
KW - Plug-in hybrid electric vehicle
KW - Renewable energy resources
KW - Sizing
UR - http://www.scopus.com/inward/record.url?scp=85090403587&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85090403587&partnerID=8YFLogxK
U2 - 10.1109/EEEIC/ICPSEurope49358.2020.9160640
DO - 10.1109/EEEIC/ICPSEurope49358.2020.9160640
M3 - Conference contribution
AN - SCOPUS:85090403587
T3 - Proceedings - 2020 IEEE International Conference on Environment and Electrical Engineering and 2020 IEEE Industrial and Commercial Power Systems Europe, EEEIC / I and CPS Europe 2020
BT - Proceedings - 2020 IEEE International Conference on Environment and Electrical Engineering and 2020 IEEE Industrial and Commercial Power Systems Europe, EEEIC / I and CPS Europe 2020
A2 - Leonowicz, Zhigniew
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 2020 IEEE International Conference on Environment and Electrical Engineering and 2020 IEEE Industrial and Commercial Power Systems Europe, EEEIC / I and CPS Europe 2020
Y2 - 9 June 2020 through 12 June 2020
ER -