CFD Study of Effects of Boundary Layer Suction on Transonic SC(2)-0714 Airfoil Performance

Ruslan Khamedov, Ruslan Baitlessov, Luis Rojas Solorzano

Research output: Contribution to conferencePaper

Abstract

The complete understanding of the aerodynamics of wings and blades under transonic conditions represents a substantial challenge in the design of modern airplanes and turbomachinery. Transonic flow over airfoils may result in appearance of shock waves, which lead to increase in drag if not properly considered during the design stage. Therefore, it is a major challenge to design transonic airfoils such that potential appearance of shock waves is foreseen and negative drag effects are minimized. This paper presents the computational study of the SC(2)-0714 airfoil, focusing on its aerodynamics characteristics at Reynolds number of 35 × 106 and angle of attack of 2 and 10 degrees which are the most common operational conditions of transonic wings using this airfoil. The study was undertaken at free-stream Mach 0.72. The numerical simulation was conducted using the finite volume method on platform ANSYS CFX™ and solving the Reynolds-Averaged Navier-Stokes, mass conservation and energy equations. Mesh verification and model validation are presented. The latter is developed by using two different isotropic turbulence models: k-ω and Shear Stress Transport (SST) and the comparison of results with NASA experimental data to determine the best among the treated models. Thereafter, effects of local boundary-layer suction on shock wave strength and characteristics during transonic speed are analyzed for the two aforementioned angles of attack. Two suction slots were placed along the airfoil contour to determine their control effectiveness when compared to standard closed-contour airfoil. Suction slots were placed at the leading edge and in the middle of the upper camber of the airfoil with inflow in the normal direction to the surface. The slot length was 2.5 % of the chord with inflow velocity of 30%, 40% and 50% of free-stream velocity. Effects of suction slots were assessed on the wake region and by computing the resulting lift-to-drag ratio. Concluding remarks on the turbulence model and global aerodynamics performance of the airfoil are presented.
Original languageEnglish
Pagespp. V007T09A063
Number of pages9
DOIs
Publication statusPublished - Nov 3 2017
EventASME 2017 International Mechanical Engineering Congress and Exposition - Tampa Convention Center, Tampa, United States
Duration: Nov 3 2017Nov 9 2017
http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=2669273

Conference

ConferenceASME 2017 International Mechanical Engineering Congress and Exposition
Abbreviated titleIMECE 2017
CountryUnited States
CityTampa
Period11/3/1711/9/17
Internet address

Fingerprint

Airfoils
Computational fluid dynamics
Boundary layers
Shock waves
Drag
Aerodynamics
Angle of attack
Turbulence models
Cambers
Transonic flow
Turbomachinery
Finite volume method
Mach number
NASA
Shear stress
Conservation
Reynolds number
Aircraft
Computer simulation

Cite this

Khamedov, R., Baitlessov, R., & Rojas Solorzano, L. (2017). CFD Study of Effects of Boundary Layer Suction on Transonic SC(2)-0714 Airfoil Performance. pp. V007T09A063. Paper presented at ASME 2017 International Mechanical Engineering Congress and Exposition, Tampa, United States. https://doi.org/10.1115/IMECE2017-70848

CFD Study of Effects of Boundary Layer Suction on Transonic SC(2)-0714 Airfoil Performance. / Khamedov, Ruslan; Baitlessov, Ruslan; Rojas Solorzano, Luis.

2017. pp. V007T09A063 Paper presented at ASME 2017 International Mechanical Engineering Congress and Exposition, Tampa, United States.

Research output: Contribution to conferencePaper

Khamedov, R, Baitlessov, R & Rojas Solorzano, L 2017, 'CFD Study of Effects of Boundary Layer Suction on Transonic SC(2)-0714 Airfoil Performance' Paper presented at ASME 2017 International Mechanical Engineering Congress and Exposition, Tampa, United States, 11/3/17 - 11/9/17, pp. pp. V007T09A063. https://doi.org/10.1115/IMECE2017-70848
Khamedov R, Baitlessov R, Rojas Solorzano L. CFD Study of Effects of Boundary Layer Suction on Transonic SC(2)-0714 Airfoil Performance. 2017. Paper presented at ASME 2017 International Mechanical Engineering Congress and Exposition, Tampa, United States. https://doi.org/10.1115/IMECE2017-70848
Khamedov, Ruslan ; Baitlessov, Ruslan ; Rojas Solorzano, Luis. / CFD Study of Effects of Boundary Layer Suction on Transonic SC(2)-0714 Airfoil Performance. Paper presented at ASME 2017 International Mechanical Engineering Congress and Exposition, Tampa, United States.9 p.
@conference{9080e18dec484fc7865ddeef911e74a0,
title = "CFD Study of Effects of Boundary Layer Suction on Transonic SC(2)-0714 Airfoil Performance",
abstract = "The complete understanding of the aerodynamics of wings and blades under transonic conditions represents a substantial challenge in the design of modern airplanes and turbomachinery. Transonic flow over airfoils may result in appearance of shock waves, which lead to increase in drag if not properly considered during the design stage. Therefore, it is a major challenge to design transonic airfoils such that potential appearance of shock waves is foreseen and negative drag effects are minimized. This paper presents the computational study of the SC(2)-0714 airfoil, focusing on its aerodynamics characteristics at Reynolds number of 35 × 106 and angle of attack of 2 and 10 degrees which are the most common operational conditions of transonic wings using this airfoil. The study was undertaken at free-stream Mach 0.72. The numerical simulation was conducted using the finite volume method on platform ANSYS CFX™ and solving the Reynolds-Averaged Navier-Stokes, mass conservation and energy equations. Mesh verification and model validation are presented. The latter is developed by using two different isotropic turbulence models: k-ω and Shear Stress Transport (SST) and the comparison of results with NASA experimental data to determine the best among the treated models. Thereafter, effects of local boundary-layer suction on shock wave strength and characteristics during transonic speed are analyzed for the two aforementioned angles of attack. Two suction slots were placed along the airfoil contour to determine their control effectiveness when compared to standard closed-contour airfoil. Suction slots were placed at the leading edge and in the middle of the upper camber of the airfoil with inflow in the normal direction to the surface. The slot length was 2.5 {\%} of the chord with inflow velocity of 30{\%}, 40{\%} and 50{\%} of free-stream velocity. Effects of suction slots were assessed on the wake region and by computing the resulting lift-to-drag ratio. Concluding remarks on the turbulence model and global aerodynamics performance of the airfoil are presented.",
author = "Ruslan Khamedov and Ruslan Baitlessov and {Rojas Solorzano}, Luis",
year = "2017",
month = "11",
day = "3",
doi = "10.1115/IMECE2017-70848",
language = "English",
pages = "pp. V007T09A063",
note = "ASME 2017 International Mechanical Engineering Congress and Exposition, IMECE 2017 ; Conference date: 03-11-2017 Through 09-11-2017",
url = "http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=2669273",

}

TY - CONF

T1 - CFD Study of Effects of Boundary Layer Suction on Transonic SC(2)-0714 Airfoil Performance

AU - Khamedov, Ruslan

AU - Baitlessov, Ruslan

AU - Rojas Solorzano, Luis

PY - 2017/11/3

Y1 - 2017/11/3

N2 - The complete understanding of the aerodynamics of wings and blades under transonic conditions represents a substantial challenge in the design of modern airplanes and turbomachinery. Transonic flow over airfoils may result in appearance of shock waves, which lead to increase in drag if not properly considered during the design stage. Therefore, it is a major challenge to design transonic airfoils such that potential appearance of shock waves is foreseen and negative drag effects are minimized. This paper presents the computational study of the SC(2)-0714 airfoil, focusing on its aerodynamics characteristics at Reynolds number of 35 × 106 and angle of attack of 2 and 10 degrees which are the most common operational conditions of transonic wings using this airfoil. The study was undertaken at free-stream Mach 0.72. The numerical simulation was conducted using the finite volume method on platform ANSYS CFX™ and solving the Reynolds-Averaged Navier-Stokes, mass conservation and energy equations. Mesh verification and model validation are presented. The latter is developed by using two different isotropic turbulence models: k-ω and Shear Stress Transport (SST) and the comparison of results with NASA experimental data to determine the best among the treated models. Thereafter, effects of local boundary-layer suction on shock wave strength and characteristics during transonic speed are analyzed for the two aforementioned angles of attack. Two suction slots were placed along the airfoil contour to determine their control effectiveness when compared to standard closed-contour airfoil. Suction slots were placed at the leading edge and in the middle of the upper camber of the airfoil with inflow in the normal direction to the surface. The slot length was 2.5 % of the chord with inflow velocity of 30%, 40% and 50% of free-stream velocity. Effects of suction slots were assessed on the wake region and by computing the resulting lift-to-drag ratio. Concluding remarks on the turbulence model and global aerodynamics performance of the airfoil are presented.

AB - The complete understanding of the aerodynamics of wings and blades under transonic conditions represents a substantial challenge in the design of modern airplanes and turbomachinery. Transonic flow over airfoils may result in appearance of shock waves, which lead to increase in drag if not properly considered during the design stage. Therefore, it is a major challenge to design transonic airfoils such that potential appearance of shock waves is foreseen and negative drag effects are minimized. This paper presents the computational study of the SC(2)-0714 airfoil, focusing on its aerodynamics characteristics at Reynolds number of 35 × 106 and angle of attack of 2 and 10 degrees which are the most common operational conditions of transonic wings using this airfoil. The study was undertaken at free-stream Mach 0.72. The numerical simulation was conducted using the finite volume method on platform ANSYS CFX™ and solving the Reynolds-Averaged Navier-Stokes, mass conservation and energy equations. Mesh verification and model validation are presented. The latter is developed by using two different isotropic turbulence models: k-ω and Shear Stress Transport (SST) and the comparison of results with NASA experimental data to determine the best among the treated models. Thereafter, effects of local boundary-layer suction on shock wave strength and characteristics during transonic speed are analyzed for the two aforementioned angles of attack. Two suction slots were placed along the airfoil contour to determine their control effectiveness when compared to standard closed-contour airfoil. Suction slots were placed at the leading edge and in the middle of the upper camber of the airfoil with inflow in the normal direction to the surface. The slot length was 2.5 % of the chord with inflow velocity of 30%, 40% and 50% of free-stream velocity. Effects of suction slots were assessed on the wake region and by computing the resulting lift-to-drag ratio. Concluding remarks on the turbulence model and global aerodynamics performance of the airfoil are presented.

UR - http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=2669273

U2 - 10.1115/IMECE2017-70848

DO - 10.1115/IMECE2017-70848

M3 - Paper

SP - pp. V007T09A063

ER -