Correction to: Construction 3D printing: a critical review and future research directions (Progress in Additive Manufacturing, (2023), 8, 6, (1393-1421), 10.1007/s40964-023-00409-8)

Akerke Baigarina; Essam Shehab; Md Hazrat Ali

doi:10.1007/s40964-025-01027-2

Correction to: Construction 3D printing: a critical review and future research directions (Progress in Additive Manufacturing, (2023), 8, 6, (1393-1421), 10.1007/s40964-023-00409-8)

Akerke Baigarina
, Essam Shehab
, Md Hazrat Ali

School of Engineering and Digital Sciences

Nazarbayev University

Research output: Contribution to journal › Comment/debate › peer-review

1 Citation (Scopus)

Abstract

The publication of this article unfortunately contained mistakes. The funding note was not correct. The corrected funding note is given below. Wrong funding note: Funding This research is funded by the Ministry of Education and Science (MES), Republic of Kazakhstan, Grant No SEDS2022014. The Source of funding code is 055.01.01.) Correct funding note: This research is funded by the Ministry of Education and Science (MES), Republic of Kazakhstan, Grant No AP13068039. The source code of funding is 055.01.01. The original article has been corrected.

Original language	English
Pages (from-to)	3067
Number of pages	1
Journal	Progress in Additive Manufacturing
Volume	10
Issue number	4
DOIs	https://doi.org/10.1007/s40964-025-01027-2
Publication status	Published - Apr 2025

ASJC Scopus subject areas

Industrial and Manufacturing Engineering

Access to Document

10.1007/s40964-025-01027-2

Cite this

Correction to: Construction 3D printing: a critical review and future research directions (Progress in Additive Manufacturing, (2023), 8, 6, (1393-1421), 10.1007/s40964-023-00409-8). / Baigarina, Akerke; Shehab, Essam ; Ali, Md Hazrat.
In: Progress in Additive Manufacturing, Vol. 10, No. 4, 04.2025, p. 3067.

Research output: Contribution to journal › Comment/debate › peer-review

@article{5bd9bf784df04cba85bb8b1cd63cbded,

title = "Correction to: Construction 3D printing: a critical review and future research directions (Progress in Additive Manufacturing, (2023), 8, 6, (1393-1421), 10.1007/s40964-023-00409-8)",

abstract = "The publication of this article unfortunately contained mistakes. The funding note was not correct. The corrected funding note is given below. Wrong funding note: Funding This research is funded by the Ministry of Education and Science (MES), Republic of Kazakhstan, Grant No SEDS2022014. The Source of funding code is 055.01.01.) Correct funding note: This research is funded by the Ministry of Education and Science (MES), Republic of Kazakhstan, Grant No AP13068039. The source code of funding is 055.01.01. The original article has been corrected.",

author = "Akerke Baigarina and Essam Shehab and Ali, \{Md Hazrat\}",

note = "Publisher Copyright: {\textcopyright} The Author(s), under exclusive licence to Springer Nature Switzerland AG 2025.",

year = "2025",

month = apr,

doi = "10.1007/s40964-025-01027-2",

language = "English",

volume = "10",

pages = "3067",

journal = "Progress in Additive Manufacturing",

issn = "2363-9512",

publisher = "Springer Verlag",

number = "4",

}

TY - JOUR

T1 - Correction to

T2 - Construction 3D printing: a critical review and future research directions (Progress in Additive Manufacturing, (2023), 8, 6, (1393-1421), 10.1007/s40964-023-00409-8)

AU - Baigarina, Akerke

AU - Shehab, Essam

AU - Ali, Md Hazrat

PY - 2025/4

Y1 - 2025/4

N2 - The publication of this article unfortunately contained mistakes. The funding note was not correct. The corrected funding note is given below. Wrong funding note: Funding This research is funded by the Ministry of Education and Science (MES), Republic of Kazakhstan, Grant No SEDS2022014. The Source of funding code is 055.01.01.) Correct funding note: This research is funded by the Ministry of Education and Science (MES), Republic of Kazakhstan, Grant No AP13068039. The source code of funding is 055.01.01. The original article has been corrected.

AB - The publication of this article unfortunately contained mistakes. The funding note was not correct. The corrected funding note is given below. Wrong funding note: Funding This research is funded by the Ministry of Education and Science (MES), Republic of Kazakhstan, Grant No SEDS2022014. The Source of funding code is 055.01.01.) Correct funding note: This research is funded by the Ministry of Education and Science (MES), Republic of Kazakhstan, Grant No AP13068039. The source code of funding is 055.01.01. The original article has been corrected.

UR - https://www.scopus.com/pages/publications/105001208845

UR - https://www.scopus.com/pages/publications/105001208845#tab=citedBy

U2 - 10.1007/s40964-025-01027-2

DO - 10.1007/s40964-025-01027-2

M3 - Comment/debate

AN - SCOPUS:105001208845

SN - 2363-9512

VL - 10

SP - 3067

JO - Progress in Additive Manufacturing

JF - Progress in Additive Manufacturing

IS - 4

ER -

Correction to: Construction 3D printing: a critical review and future research directions (Progress in Additive Manufacturing, (2023), 8, 6, (1393-1421), 10.1007/s40964-023-00409-8)

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this