Dynamic performance analysis of minimally actuated 4-Bar linkages for upper limb rehabilitation

Evagoras G. Xydas, Andreas Mueller

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In the last two decades robotic rehabilitation research provided insight regarding the human-robot interaction, helped understand the process by which the impaired nervous system is retrained to better control the hand motion, and led to the development of a number of mathematical and neurophysiological models that describe both the hand motion and the robot control. Now that this pool of knowledge is available, the respective models can be applied in a number of ways outside the robot domain, in which, machines are based on open kinematic chains with n-degrees of freedom (DOF's) and sophisticated computer control, actuation and sensing. One such example is the use of mechanisms, closed kinematic chains which can still generate complex -yet specifictrajectories with fewer DOF's. This paper further extends previous work on the design of such passive-active mechanisms that replicate the natural hand motion along a straight-line. The natural hand motion is described by a smooth bell-shaped velocity profile which in turn is generated by the wellestablished Minimum-Jerk-Model (MJM). Three different straight line 4-bar linkages, a Chebyshev's, a Hoeken's and a Watt's, are examined. First, with the use of kinetostatic analysis and given the natural hand velocity and acceleration, the torque function of non-linear springs that act on the driving link is deduced. Then, given that the springs are acting, interaction with impaired users is considered and the extra actuation power that can maintain the natural velocity profile is calculated. A multibody dynamics software is employed for further assessing the mechanisms' dynamic response under varying interaction forces. Also, different parameters like inertia are altered and the effects on internal (springs) and external (actuator) power are examined. Then, the three mechanisms are compared with respect to size, required amount of external power, ergonomic issues etc. Finally, it is investigated whether a linear fit of the non-linear spring torque can be adequate for generating the desired MJM trajectory and operate effectively in collaboration with the active part of the control.

Original languageEnglish
Title of host publication39th Mechanisms and Robotics Conference
PublisherAmerican Society of Mechanical Engineers (ASME)
Volume5A-2015
ISBN (Electronic)9780791857120
DOIs
Publication statusPublished - 2015
Externally publishedYes
EventASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2015 - Boston, United States
Duration: Aug 2 2015Aug 5 2015

Other

OtherASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2015
CountryUnited States
CityBoston
Period8/2/158/5/15

Fingerprint

Dynamic Performance
Rehabilitation
Dynamic Analysis
Patient rehabilitation
Linkage
Performance Analysis
Motion
Velocity Profile
Straight Line
Torque
Kinematics
Degree of freedom
Robots
Human-robot Interaction
Human robot interaction
Ergonomics
Multibody Dynamics
Robot Control
Computer control
Degrees of freedom (mechanics)

ASJC Scopus subject areas

  • Modelling and Simulation
  • Mechanical Engineering
  • Computer Science Applications
  • Computer Graphics and Computer-Aided Design

Cite this

Xydas, E. G., & Mueller, A. (2015). Dynamic performance analysis of minimally actuated 4-Bar linkages for upper limb rehabilitation. In 39th Mechanisms and Robotics Conference (Vol. 5A-2015). American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC2015-46828

Dynamic performance analysis of minimally actuated 4-Bar linkages for upper limb rehabilitation. / Xydas, Evagoras G.; Mueller, Andreas.

39th Mechanisms and Robotics Conference. Vol. 5A-2015 American Society of Mechanical Engineers (ASME), 2015.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Xydas, EG & Mueller, A 2015, Dynamic performance analysis of minimally actuated 4-Bar linkages for upper limb rehabilitation. in 39th Mechanisms and Robotics Conference. vol. 5A-2015, American Society of Mechanical Engineers (ASME), ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2015, Boston, United States, 8/2/15. https://doi.org/10.1115/DETC2015-46828
Xydas EG, Mueller A. Dynamic performance analysis of minimally actuated 4-Bar linkages for upper limb rehabilitation. In 39th Mechanisms and Robotics Conference. Vol. 5A-2015. American Society of Mechanical Engineers (ASME). 2015 https://doi.org/10.1115/DETC2015-46828
Xydas, Evagoras G. ; Mueller, Andreas. / Dynamic performance analysis of minimally actuated 4-Bar linkages for upper limb rehabilitation. 39th Mechanisms and Robotics Conference. Vol. 5A-2015 American Society of Mechanical Engineers (ASME), 2015.
@inproceedings{cbd563b667f146e6b224ca6c4b3ef353,
title = "Dynamic performance analysis of minimally actuated 4-Bar linkages for upper limb rehabilitation",
abstract = "In the last two decades robotic rehabilitation research provided insight regarding the human-robot interaction, helped understand the process by which the impaired nervous system is retrained to better control the hand motion, and led to the development of a number of mathematical and neurophysiological models that describe both the hand motion and the robot control. Now that this pool of knowledge is available, the respective models can be applied in a number of ways outside the robot domain, in which, machines are based on open kinematic chains with n-degrees of freedom (DOF's) and sophisticated computer control, actuation and sensing. One such example is the use of mechanisms, closed kinematic chains which can still generate complex -yet specifictrajectories with fewer DOF's. This paper further extends previous work on the design of such passive-active mechanisms that replicate the natural hand motion along a straight-line. The natural hand motion is described by a smooth bell-shaped velocity profile which in turn is generated by the wellestablished Minimum-Jerk-Model (MJM). Three different straight line 4-bar linkages, a Chebyshev's, a Hoeken's and a Watt's, are examined. First, with the use of kinetostatic analysis and given the natural hand velocity and acceleration, the torque function of non-linear springs that act on the driving link is deduced. Then, given that the springs are acting, interaction with impaired users is considered and the extra actuation power that can maintain the natural velocity profile is calculated. A multibody dynamics software is employed for further assessing the mechanisms' dynamic response under varying interaction forces. Also, different parameters like inertia are altered and the effects on internal (springs) and external (actuator) power are examined. Then, the three mechanisms are compared with respect to size, required amount of external power, ergonomic issues etc. Finally, it is investigated whether a linear fit of the non-linear spring torque can be adequate for generating the desired MJM trajectory and operate effectively in collaboration with the active part of the control.",
author = "Xydas, {Evagoras G.} and Andreas Mueller",
year = "2015",
doi = "10.1115/DETC2015-46828",
language = "English",
volume = "5A-2015",
booktitle = "39th Mechanisms and Robotics Conference",
publisher = "American Society of Mechanical Engineers (ASME)",

}

TY - GEN

T1 - Dynamic performance analysis of minimally actuated 4-Bar linkages for upper limb rehabilitation

AU - Xydas, Evagoras G.

AU - Mueller, Andreas

PY - 2015

Y1 - 2015

N2 - In the last two decades robotic rehabilitation research provided insight regarding the human-robot interaction, helped understand the process by which the impaired nervous system is retrained to better control the hand motion, and led to the development of a number of mathematical and neurophysiological models that describe both the hand motion and the robot control. Now that this pool of knowledge is available, the respective models can be applied in a number of ways outside the robot domain, in which, machines are based on open kinematic chains with n-degrees of freedom (DOF's) and sophisticated computer control, actuation and sensing. One such example is the use of mechanisms, closed kinematic chains which can still generate complex -yet specifictrajectories with fewer DOF's. This paper further extends previous work on the design of such passive-active mechanisms that replicate the natural hand motion along a straight-line. The natural hand motion is described by a smooth bell-shaped velocity profile which in turn is generated by the wellestablished Minimum-Jerk-Model (MJM). Three different straight line 4-bar linkages, a Chebyshev's, a Hoeken's and a Watt's, are examined. First, with the use of kinetostatic analysis and given the natural hand velocity and acceleration, the torque function of non-linear springs that act on the driving link is deduced. Then, given that the springs are acting, interaction with impaired users is considered and the extra actuation power that can maintain the natural velocity profile is calculated. A multibody dynamics software is employed for further assessing the mechanisms' dynamic response under varying interaction forces. Also, different parameters like inertia are altered and the effects on internal (springs) and external (actuator) power are examined. Then, the three mechanisms are compared with respect to size, required amount of external power, ergonomic issues etc. Finally, it is investigated whether a linear fit of the non-linear spring torque can be adequate for generating the desired MJM trajectory and operate effectively in collaboration with the active part of the control.

AB - In the last two decades robotic rehabilitation research provided insight regarding the human-robot interaction, helped understand the process by which the impaired nervous system is retrained to better control the hand motion, and led to the development of a number of mathematical and neurophysiological models that describe both the hand motion and the robot control. Now that this pool of knowledge is available, the respective models can be applied in a number of ways outside the robot domain, in which, machines are based on open kinematic chains with n-degrees of freedom (DOF's) and sophisticated computer control, actuation and sensing. One such example is the use of mechanisms, closed kinematic chains which can still generate complex -yet specifictrajectories with fewer DOF's. This paper further extends previous work on the design of such passive-active mechanisms that replicate the natural hand motion along a straight-line. The natural hand motion is described by a smooth bell-shaped velocity profile which in turn is generated by the wellestablished Minimum-Jerk-Model (MJM). Three different straight line 4-bar linkages, a Chebyshev's, a Hoeken's and a Watt's, are examined. First, with the use of kinetostatic analysis and given the natural hand velocity and acceleration, the torque function of non-linear springs that act on the driving link is deduced. Then, given that the springs are acting, interaction with impaired users is considered and the extra actuation power that can maintain the natural velocity profile is calculated. A multibody dynamics software is employed for further assessing the mechanisms' dynamic response under varying interaction forces. Also, different parameters like inertia are altered and the effects on internal (springs) and external (actuator) power are examined. Then, the three mechanisms are compared with respect to size, required amount of external power, ergonomic issues etc. Finally, it is investigated whether a linear fit of the non-linear spring torque can be adequate for generating the desired MJM trajectory and operate effectively in collaboration with the active part of the control.

UR - http://www.scopus.com/inward/record.url?scp=84973340687&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84973340687&partnerID=8YFLogxK

U2 - 10.1115/DETC2015-46828

DO - 10.1115/DETC2015-46828

M3 - Conference contribution

AN - SCOPUS:84973340687

VL - 5A-2015

BT - 39th Mechanisms and Robotics Conference

PB - American Society of Mechanical Engineers (ASME)

ER -