Effect of slurry formulation on morphology and flowability of spray-dried Alumina/zirconia composite particles

S. Chiangka, S. Watcharamaisakul, B. Golman

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

Alumina/zirconia composite materials are widely used for biomedical applications because of their high biocompatibility and good mechanical properties. In this work, the effects of slurry solid content and binder type are studied on the characteristics of spray-dried composite particles. The tap density and particle size of composite particles increase while the compressibility index decreases with increasing solid content of slurry. An analysis of the SEM micrographs of spray-dried particles confirms the formation of dense composite particles of round shape without internal holes with 70 wt.% slurry using PVA+PEG co-binder.

Original languageEnglish
Title of host publicationApplied Physics and Material Applications II
PublisherTrans Tech Publications
Pages531-534
Number of pages4
Volume675-676
ISBN (Print)9783038356837
DOIs
Publication statusPublished - 2016
Externally publishedYes
Event2nd International Conference on Applied Physics and Material Applications, ICAPMA 2015 - Pattaya, Thailand
Duration: May 28 2015May 30 2015

Publication series

NameKey Engineering Materials
Volume675-676
ISSN (Print)10139826

Other

Other2nd International Conference on Applied Physics and Material Applications, ICAPMA 2015
CountryThailand
CityPattaya
Period5/28/155/30/15

Fingerprint

Aluminum Oxide
Zirconia
Alumina
Composite materials
Binders
Biocompatibility
Compressibility
Polyethylene glycols
Particle size
Mechanical properties
Scanning electron microscopy
zirconium oxide

Keywords

  • Composite particles
  • Flowability
  • Morphology
  • Spray drying

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Chiangka, S., Watcharamaisakul, S., & Golman, B. (2016). Effect of slurry formulation on morphology and flowability of spray-dried Alumina/zirconia composite particles. In Applied Physics and Material Applications II (Vol. 675-676, pp. 531-534). (Key Engineering Materials; Vol. 675-676). Trans Tech Publications. https://doi.org/10.4028/www.scientific.net/KEM.675-676.531

Effect of slurry formulation on morphology and flowability of spray-dried Alumina/zirconia composite particles. / Chiangka, S.; Watcharamaisakul, S.; Golman, B.

Applied Physics and Material Applications II. Vol. 675-676 Trans Tech Publications, 2016. p. 531-534 (Key Engineering Materials; Vol. 675-676).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chiangka, S, Watcharamaisakul, S & Golman, B 2016, Effect of slurry formulation on morphology and flowability of spray-dried Alumina/zirconia composite particles. in Applied Physics and Material Applications II. vol. 675-676, Key Engineering Materials, vol. 675-676, Trans Tech Publications, pp. 531-534, 2nd International Conference on Applied Physics and Material Applications, ICAPMA 2015, Pattaya, Thailand, 5/28/15. https://doi.org/10.4028/www.scientific.net/KEM.675-676.531
Chiangka S, Watcharamaisakul S, Golman B. Effect of slurry formulation on morphology and flowability of spray-dried Alumina/zirconia composite particles. In Applied Physics and Material Applications II. Vol. 675-676. Trans Tech Publications. 2016. p. 531-534. (Key Engineering Materials). https://doi.org/10.4028/www.scientific.net/KEM.675-676.531
Chiangka, S. ; Watcharamaisakul, S. ; Golman, B. / Effect of slurry formulation on morphology and flowability of spray-dried Alumina/zirconia composite particles. Applied Physics and Material Applications II. Vol. 675-676 Trans Tech Publications, 2016. pp. 531-534 (Key Engineering Materials).
@inproceedings{7d91393ddf0041d58f5b8b9fc506e6a2,
title = "Effect of slurry formulation on morphology and flowability of spray-dried Alumina/zirconia composite particles",
abstract = "Alumina/zirconia composite materials are widely used for biomedical applications because of their high biocompatibility and good mechanical properties. In this work, the effects of slurry solid content and binder type are studied on the characteristics of spray-dried composite particles. The tap density and particle size of composite particles increase while the compressibility index decreases with increasing solid content of slurry. An analysis of the SEM micrographs of spray-dried particles confirms the formation of dense composite particles of round shape without internal holes with 70 wt.{\%} slurry using PVA+PEG co-binder.",
keywords = "Composite particles, Flowability, Morphology, Spray drying",
author = "S. Chiangka and S. Watcharamaisakul and B. Golman",
year = "2016",
doi = "10.4028/www.scientific.net/KEM.675-676.531",
language = "English",
isbn = "9783038356837",
volume = "675-676",
series = "Key Engineering Materials",
publisher = "Trans Tech Publications",
pages = "531--534",
booktitle = "Applied Physics and Material Applications II",
address = "Germany",

}

TY - GEN

T1 - Effect of slurry formulation on morphology and flowability of spray-dried Alumina/zirconia composite particles

AU - Chiangka, S.

AU - Watcharamaisakul, S.

AU - Golman, B.

PY - 2016

Y1 - 2016

N2 - Alumina/zirconia composite materials are widely used for biomedical applications because of their high biocompatibility and good mechanical properties. In this work, the effects of slurry solid content and binder type are studied on the characteristics of spray-dried composite particles. The tap density and particle size of composite particles increase while the compressibility index decreases with increasing solid content of slurry. An analysis of the SEM micrographs of spray-dried particles confirms the formation of dense composite particles of round shape without internal holes with 70 wt.% slurry using PVA+PEG co-binder.

AB - Alumina/zirconia composite materials are widely used for biomedical applications because of their high biocompatibility and good mechanical properties. In this work, the effects of slurry solid content and binder type are studied on the characteristics of spray-dried composite particles. The tap density and particle size of composite particles increase while the compressibility index decreases with increasing solid content of slurry. An analysis of the SEM micrographs of spray-dried particles confirms the formation of dense composite particles of round shape without internal holes with 70 wt.% slurry using PVA+PEG co-binder.

KW - Composite particles

KW - Flowability

KW - Morphology

KW - Spray drying

UR - http://www.scopus.com/inward/record.url?scp=84958213312&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84958213312&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/KEM.675-676.531

DO - 10.4028/www.scientific.net/KEM.675-676.531

M3 - Conference contribution

AN - SCOPUS:84958213312

SN - 9783038356837

VL - 675-676

T3 - Key Engineering Materials

SP - 531

EP - 534

BT - Applied Physics and Material Applications II

PB - Trans Tech Publications

ER -