Investigating block caving geomechanics using seismic space-time sequences and virtual reality scientific visualization

J. D. Tibbett, F. T. Suorineni, B. K. Hebblewhite

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Block caving is an underground mining method that enables profitable extraction of massive, low-grade orebodies, provided orebody geometry, size and competence (quality) favors caving. The use of the block cave mining method is increasing in popularity as it is the lowest cost underground mining method and it enables large production rates. Despite the trend towards block cave mining, the method still faces several challenges. Improved understanding of how a rockmass responds to caving will lead to safer, more predictable and more productive cave mining operations. Combining large datasets from multiple sources with virtual reality scientific visualization (VRSV) is a viable alternative to understanding complex cave behavior without access to the cave. The block caving mining system is complex due to multiple interrelating factors and it is vital that the block cave mining system is analyzed holistically, rather than optimizing individual factors in isolation. The block cave mining system visualizer (BCMSV) software module was developed within the School of Mining Engineering at the University of New South Wales to harness VRSV for this purpose. The back analysis of Newcrest Mining Limited's Ridgeway Deeps operation using the BCMSV enabled the phenomenon of pulses in the rate of seismic activity to be identified in the active region of cave propagation. Capturing these regions with seismic space-time sequences (SSTS) led to further analysis into the source mechanisms. Orientation analysis of SSTS damage volumes has enabled active joint sets in critical areas of cave propagation to be correlated to the SSTS, suggesting that the seismicity is related to joint activity. This observation is supported by numerical modelling results and seismic property analysis. The potential exists for the location of SSTS events to be used within the management cycle of a block caving operation to provide an indication of the critically stressed region of the caving column, where cave propagation is likely migrating. Engineering/geology teams can also utilize the contained SSTS orientation information for quickly imaging the rockmass fabric response to stress change to identify the caving mechanisms dominant within that damage volume.

Original languageEnglish
Title of host publication49th US Rock Mechanics / Geomechanics Symposium 2015
PublisherAmerican Rock Mechanics Association (ARMA)
Pages452-464
Number of pages13
ISBN (Electronic)9781510810518
Publication statusPublished - Jan 1 2015
Externally publishedYes
Event49th US Rock Mechanics / Geomechanics Symposium - San Francisco, United States
Duration: Jun 29 2015Jul 1 2015

Publication series

Name49th US Rock Mechanics / Geomechanics Symposium 2015
Volume1

Conference

Conference49th US Rock Mechanics / Geomechanics Symposium
CountryUnited States
CitySan Francisco
Period6/29/157/1/15

Fingerprint

Geomechanics
scientific visualization
virtual reality
caves
Caves
geomechanics
Data visualization
caving
Virtual reality
cave
visualization
propagation
Mining engineering
engineering
Engineering geology
damage
harnesses
seismic property
Wales
engineering geology

ASJC Scopus subject areas

  • Geophysics
  • Geochemistry and Petrology

Cite this

Tibbett, J. D., Suorineni, F. T., & Hebblewhite, B. K. (2015). Investigating block caving geomechanics using seismic space-time sequences and virtual reality scientific visualization. In 49th US Rock Mechanics / Geomechanics Symposium 2015 (pp. 452-464). (49th US Rock Mechanics / Geomechanics Symposium 2015; Vol. 1). American Rock Mechanics Association (ARMA).

Investigating block caving geomechanics using seismic space-time sequences and virtual reality scientific visualization. / Tibbett, J. D.; Suorineni, F. T.; Hebblewhite, B. K.

49th US Rock Mechanics / Geomechanics Symposium 2015. American Rock Mechanics Association (ARMA), 2015. p. 452-464 (49th US Rock Mechanics / Geomechanics Symposium 2015; Vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tibbett, JD, Suorineni, FT & Hebblewhite, BK 2015, Investigating block caving geomechanics using seismic space-time sequences and virtual reality scientific visualization. in 49th US Rock Mechanics / Geomechanics Symposium 2015. 49th US Rock Mechanics / Geomechanics Symposium 2015, vol. 1, American Rock Mechanics Association (ARMA), pp. 452-464, 49th US Rock Mechanics / Geomechanics Symposium, San Francisco, United States, 6/29/15.
Tibbett JD, Suorineni FT, Hebblewhite BK. Investigating block caving geomechanics using seismic space-time sequences and virtual reality scientific visualization. In 49th US Rock Mechanics / Geomechanics Symposium 2015. American Rock Mechanics Association (ARMA). 2015. p. 452-464. (49th US Rock Mechanics / Geomechanics Symposium 2015).
Tibbett, J. D. ; Suorineni, F. T. ; Hebblewhite, B. K. / Investigating block caving geomechanics using seismic space-time sequences and virtual reality scientific visualization. 49th US Rock Mechanics / Geomechanics Symposium 2015. American Rock Mechanics Association (ARMA), 2015. pp. 452-464 (49th US Rock Mechanics / Geomechanics Symposium 2015).
@inproceedings{8a27be011705405bbc8d2da3a1457e67,
title = "Investigating block caving geomechanics using seismic space-time sequences and virtual reality scientific visualization",
abstract = "Block caving is an underground mining method that enables profitable extraction of massive, low-grade orebodies, provided orebody geometry, size and competence (quality) favors caving. The use of the block cave mining method is increasing in popularity as it is the lowest cost underground mining method and it enables large production rates. Despite the trend towards block cave mining, the method still faces several challenges. Improved understanding of how a rockmass responds to caving will lead to safer, more predictable and more productive cave mining operations. Combining large datasets from multiple sources with virtual reality scientific visualization (VRSV) is a viable alternative to understanding complex cave behavior without access to the cave. The block caving mining system is complex due to multiple interrelating factors and it is vital that the block cave mining system is analyzed holistically, rather than optimizing individual factors in isolation. The block cave mining system visualizer (BCMSV) software module was developed within the School of Mining Engineering at the University of New South Wales to harness VRSV for this purpose. The back analysis of Newcrest Mining Limited's Ridgeway Deeps operation using the BCMSV enabled the phenomenon of pulses in the rate of seismic activity to be identified in the active region of cave propagation. Capturing these regions with seismic space-time sequences (SSTS) led to further analysis into the source mechanisms. Orientation analysis of SSTS damage volumes has enabled active joint sets in critical areas of cave propagation to be correlated to the SSTS, suggesting that the seismicity is related to joint activity. This observation is supported by numerical modelling results and seismic property analysis. The potential exists for the location of SSTS events to be used within the management cycle of a block caving operation to provide an indication of the critically stressed region of the caving column, where cave propagation is likely migrating. Engineering/geology teams can also utilize the contained SSTS orientation information for quickly imaging the rockmass fabric response to stress change to identify the caving mechanisms dominant within that damage volume.",
author = "Tibbett, {J. D.} and Suorineni, {F. T.} and Hebblewhite, {B. K.}",
year = "2015",
month = "1",
day = "1",
language = "English",
series = "49th US Rock Mechanics / Geomechanics Symposium 2015",
publisher = "American Rock Mechanics Association (ARMA)",
pages = "452--464",
booktitle = "49th US Rock Mechanics / Geomechanics Symposium 2015",

}

TY - GEN

T1 - Investigating block caving geomechanics using seismic space-time sequences and virtual reality scientific visualization

AU - Tibbett, J. D.

AU - Suorineni, F. T.

AU - Hebblewhite, B. K.

PY - 2015/1/1

Y1 - 2015/1/1

N2 - Block caving is an underground mining method that enables profitable extraction of massive, low-grade orebodies, provided orebody geometry, size and competence (quality) favors caving. The use of the block cave mining method is increasing in popularity as it is the lowest cost underground mining method and it enables large production rates. Despite the trend towards block cave mining, the method still faces several challenges. Improved understanding of how a rockmass responds to caving will lead to safer, more predictable and more productive cave mining operations. Combining large datasets from multiple sources with virtual reality scientific visualization (VRSV) is a viable alternative to understanding complex cave behavior without access to the cave. The block caving mining system is complex due to multiple interrelating factors and it is vital that the block cave mining system is analyzed holistically, rather than optimizing individual factors in isolation. The block cave mining system visualizer (BCMSV) software module was developed within the School of Mining Engineering at the University of New South Wales to harness VRSV for this purpose. The back analysis of Newcrest Mining Limited's Ridgeway Deeps operation using the BCMSV enabled the phenomenon of pulses in the rate of seismic activity to be identified in the active region of cave propagation. Capturing these regions with seismic space-time sequences (SSTS) led to further analysis into the source mechanisms. Orientation analysis of SSTS damage volumes has enabled active joint sets in critical areas of cave propagation to be correlated to the SSTS, suggesting that the seismicity is related to joint activity. This observation is supported by numerical modelling results and seismic property analysis. The potential exists for the location of SSTS events to be used within the management cycle of a block caving operation to provide an indication of the critically stressed region of the caving column, where cave propagation is likely migrating. Engineering/geology teams can also utilize the contained SSTS orientation information for quickly imaging the rockmass fabric response to stress change to identify the caving mechanisms dominant within that damage volume.

AB - Block caving is an underground mining method that enables profitable extraction of massive, low-grade orebodies, provided orebody geometry, size and competence (quality) favors caving. The use of the block cave mining method is increasing in popularity as it is the lowest cost underground mining method and it enables large production rates. Despite the trend towards block cave mining, the method still faces several challenges. Improved understanding of how a rockmass responds to caving will lead to safer, more predictable and more productive cave mining operations. Combining large datasets from multiple sources with virtual reality scientific visualization (VRSV) is a viable alternative to understanding complex cave behavior without access to the cave. The block caving mining system is complex due to multiple interrelating factors and it is vital that the block cave mining system is analyzed holistically, rather than optimizing individual factors in isolation. The block cave mining system visualizer (BCMSV) software module was developed within the School of Mining Engineering at the University of New South Wales to harness VRSV for this purpose. The back analysis of Newcrest Mining Limited's Ridgeway Deeps operation using the BCMSV enabled the phenomenon of pulses in the rate of seismic activity to be identified in the active region of cave propagation. Capturing these regions with seismic space-time sequences (SSTS) led to further analysis into the source mechanisms. Orientation analysis of SSTS damage volumes has enabled active joint sets in critical areas of cave propagation to be correlated to the SSTS, suggesting that the seismicity is related to joint activity. This observation is supported by numerical modelling results and seismic property analysis. The potential exists for the location of SSTS events to be used within the management cycle of a block caving operation to provide an indication of the critically stressed region of the caving column, where cave propagation is likely migrating. Engineering/geology teams can also utilize the contained SSTS orientation information for quickly imaging the rockmass fabric response to stress change to identify the caving mechanisms dominant within that damage volume.

UR - http://www.scopus.com/inward/record.url?scp=84964967711&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84964967711&partnerID=8YFLogxK

M3 - Conference contribution

T3 - 49th US Rock Mechanics / Geomechanics Symposium 2015

SP - 452

EP - 464

BT - 49th US Rock Mechanics / Geomechanics Symposium 2015

PB - American Rock Mechanics Association (ARMA)

ER -