Laboratory Hydraulic Tensile Strength Correlation with Strength-Based Brittleness Indices for Carbonate Reservoirs

Mohammad Ezazi, Ebrahim Ghorbani, Ali Shafiei, Ebrahim Sharifi Teshnizi, Brendan C. O’Kelly

Research output: Contribution to journalArticlepeer-review

2 Citations (Scopus)

Abstract

Hydraulic fracturing (HF) is the primary choice for stimulating petroleum reservoirs. Rock tensile strength and brittleness are crucial parameters required for screening candidate reservoirs and in designing successful HF operations. However, in situ and laboratory determinations of the hydraulic tensile strength (HTS) of rock can prove problematic. Alternatively, the HTS could be estimated from the rock brittleness once a reliable relationship has been established between them. Accordingly, this paper investigates the correlations between the HTS, as measured using laboratory hydraulic fracture tests, and ten strength-based brittleness indices (BIs) selected from the research literature. The primary inputs for computing these BIs are uniaxial compressive strength (UCS) and the Brazilian tensile strength (BTS), which are typically measured for most projects using standard laboratory rock mechanics tests or obtained from log data. For the purposes of this experimental investigation, intact rock core samples were obtained from a carbonate–dolomite formation in Iran, comprising eight distinct geomechanical units, with measured values of UCS, BTS, and HTS ranging 29.7–162.2, 1.93–12.23, and 7.20–20.63 MPa, respectively. The measured HTS was found to directly correlate with the UCS, BTS, and Young’s modulus, and inversely correlated with the rock porosity. Seven of the ten investigated BIs correlated with the measured HTS over 69% (R2 ≥ 0.69). In particular, the BI expressions developed by Yagiz and Gokceoglu, Ghadernejad et al., and Khandelwal et al. exhibited relatively strong correlations with the measured HTS (producing R2 values of 0.94, 0.87, and 0.86, respectively), suggesting that these three HTS–BI correlations could be used to provide preliminary HTS estimates for the investigated carbonate–dolomite formation in Iran. This work adds to a database that can be expanded to include other geographical regions for providing useful information about the selection of a suitable site or reserve for conducting HF operations.

Original languageEnglish
Article number52
JournalGeosciences (Switzerland)
Volume14
Issue number2
DOIs
Publication statusPublished - Feb 2024

Keywords

  • brittleness index
  • carbonate rock
  • correlation
  • hydraulic fracturing
  • hydraulic tensile strength
  • laboratory hydraulic fracture test

ASJC Scopus subject areas

  • General Earth and Planetary Sciences

Fingerprint

Dive into the research topics of 'Laboratory Hydraulic Tensile Strength Correlation with Strength-Based Brittleness Indices for Carbonate Reservoirs'. Together they form a unique fingerprint.

Cite this