Novel FBG femtosecond laser inscription method for improved FPI sensors for medical applications

Sven Poeggel, Dineshbabu Duraibabu, Daniele Tosi, Gabriel Leen, Elfed Lewis, Amedee Lacraz, Michael Hambalis, Charalambos Koutsides, Kyriacos Kalli

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Abstract

A novel fibre Bragg grating (FBG) post-inscription technique using a femto second laser (FSL), used to modify an optical fibre pressure sensor (OFPS) based on an extrinsic Fabry Perot Interferometer (EFPI) is presented. The resultant sensor is an optical fibre pressure and temperature sensor (OFPTS), able to measure temperature and pressure simultaneously in precisely the same location within the optical fibre. Hence the temperature measurement can be used to accurately compensate any thermal fluctuations in the pressure measurements, leading to an improved long term stability. The Bragg-wavelength can be tailored to coincide with any part of the Fabry-Perot Interferometer (FPI) spectrum (e.g. define the FBG at a valley of the FPI spectrum). We use a modified femtosecond laser, point-by-point inscription method for precise and controlled placement of the fibre Bragg grating. Our technique can be readily adapted to commercial production methods for optical fibre sensors as it greatly mitigates the alignment problems associated with femtosecond laser inscription of gratings in optical fibres. The sensor presented in this paper is entirely fabricated with quartz glass, which makes it fully bio-compatible and can be used for biomedical application. The sensors achieved a high sensitivity of 1.3 nm kPa resulting in a resolution of ∼ 1mmHg and a temperature sensitivity of ∼ 10.7pm K. After the inscription, the sensors still demonstrated a stability of better than 0:1% in 30min. The small diameter of only 200μm allows biomedical in-vivo application in volume restricted areas (e.g. blood vessels or the brain) for simultaneous temperature and pressure measurements.

Original languageEnglish
Title of host publicationProceedings of IEEE Sensors
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages25-28
Number of pages4
Volume2014-December
EditionDecember
DOIs
Publication statusPublished - Dec 12 2014
Externally publishedYes
Event13th IEEE SENSORS Conference, SENSORS 2014 - Valencia, Spain
Duration: Nov 2 2014Nov 5 2014

Other

Other13th IEEE SENSORS Conference, SENSORS 2014
CountrySpain
CityValencia
Period11/2/1411/5/14

Fingerprint

Fabry-Perot interferometers
Medical applications
Fiber Bragg gratings
Ultrashort pulses
Optical fibers
Sensors
Pressure sensors
Pressure measurement
Temperature measurement
Blood vessels
Fiber optic sensors
Temperature sensors
Quartz
Brain
Glass
Wavelength
Temperature
Lasers

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Poeggel, S., Duraibabu, D., Tosi, D., Leen, G., Lewis, E., Lacraz, A., ... Kalli, K. (2014). Novel FBG femtosecond laser inscription method for improved FPI sensors for medical applications. In Proceedings of IEEE Sensors (December ed., Vol. 2014-December, pp. 25-28). [6984923] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICSENS.2014.6984923

Novel FBG femtosecond laser inscription method for improved FPI sensors for medical applications. / Poeggel, Sven; Duraibabu, Dineshbabu; Tosi, Daniele; Leen, Gabriel; Lewis, Elfed; Lacraz, Amedee; Hambalis, Michael; Koutsides, Charalambos; Kalli, Kyriacos.

Proceedings of IEEE Sensors. Vol. 2014-December December. ed. Institute of Electrical and Electronics Engineers Inc., 2014. p. 25-28 6984923.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Poeggel, S, Duraibabu, D, Tosi, D, Leen, G, Lewis, E, Lacraz, A, Hambalis, M, Koutsides, C & Kalli, K 2014, Novel FBG femtosecond laser inscription method for improved FPI sensors for medical applications. in Proceedings of IEEE Sensors. December edn, vol. 2014-December, 6984923, Institute of Electrical and Electronics Engineers Inc., pp. 25-28, 13th IEEE SENSORS Conference, SENSORS 2014, Valencia, Spain, 11/2/14. https://doi.org/10.1109/ICSENS.2014.6984923
Poeggel S, Duraibabu D, Tosi D, Leen G, Lewis E, Lacraz A et al. Novel FBG femtosecond laser inscription method for improved FPI sensors for medical applications. In Proceedings of IEEE Sensors. December ed. Vol. 2014-December. Institute of Electrical and Electronics Engineers Inc. 2014. p. 25-28. 6984923 https://doi.org/10.1109/ICSENS.2014.6984923
Poeggel, Sven ; Duraibabu, Dineshbabu ; Tosi, Daniele ; Leen, Gabriel ; Lewis, Elfed ; Lacraz, Amedee ; Hambalis, Michael ; Koutsides, Charalambos ; Kalli, Kyriacos. / Novel FBG femtosecond laser inscription method for improved FPI sensors for medical applications. Proceedings of IEEE Sensors. Vol. 2014-December December. ed. Institute of Electrical and Electronics Engineers Inc., 2014. pp. 25-28
@inproceedings{a66304050022431bbecf30fb8ecd65b0,
title = "Novel FBG femtosecond laser inscription method for improved FPI sensors for medical applications",
abstract = "A novel fibre Bragg grating (FBG) post-inscription technique using a femto second laser (FSL), used to modify an optical fibre pressure sensor (OFPS) based on an extrinsic Fabry Perot Interferometer (EFPI) is presented. The resultant sensor is an optical fibre pressure and temperature sensor (OFPTS), able to measure temperature and pressure simultaneously in precisely the same location within the optical fibre. Hence the temperature measurement can be used to accurately compensate any thermal fluctuations in the pressure measurements, leading to an improved long term stability. The Bragg-wavelength can be tailored to coincide with any part of the Fabry-Perot Interferometer (FPI) spectrum (e.g. define the FBG at a valley of the FPI spectrum). We use a modified femtosecond laser, point-by-point inscription method for precise and controlled placement of the fibre Bragg grating. Our technique can be readily adapted to commercial production methods for optical fibre sensors as it greatly mitigates the alignment problems associated with femtosecond laser inscription of gratings in optical fibres. The sensor presented in this paper is entirely fabricated with quartz glass, which makes it fully bio-compatible and can be used for biomedical application. The sensors achieved a high sensitivity of 1.3 nm kPa resulting in a resolution of ∼ 1mmHg and a temperature sensitivity of ∼ 10.7pm K. After the inscription, the sensors still demonstrated a stability of better than 0:1{\%} in 30min. The small diameter of only 200μm allows biomedical in-vivo application in volume restricted areas (e.g. blood vessels or the brain) for simultaneous temperature and pressure measurements.",
author = "Sven Poeggel and Dineshbabu Duraibabu and Daniele Tosi and Gabriel Leen and Elfed Lewis and Amedee Lacraz and Michael Hambalis and Charalambos Koutsides and Kyriacos Kalli",
year = "2014",
month = "12",
day = "12",
doi = "10.1109/ICSENS.2014.6984923",
language = "English",
volume = "2014-December",
pages = "25--28",
booktitle = "Proceedings of IEEE Sensors",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
address = "United States",
edition = "December",

}

TY - GEN

T1 - Novel FBG femtosecond laser inscription method for improved FPI sensors for medical applications

AU - Poeggel, Sven

AU - Duraibabu, Dineshbabu

AU - Tosi, Daniele

AU - Leen, Gabriel

AU - Lewis, Elfed

AU - Lacraz, Amedee

AU - Hambalis, Michael

AU - Koutsides, Charalambos

AU - Kalli, Kyriacos

PY - 2014/12/12

Y1 - 2014/12/12

N2 - A novel fibre Bragg grating (FBG) post-inscription technique using a femto second laser (FSL), used to modify an optical fibre pressure sensor (OFPS) based on an extrinsic Fabry Perot Interferometer (EFPI) is presented. The resultant sensor is an optical fibre pressure and temperature sensor (OFPTS), able to measure temperature and pressure simultaneously in precisely the same location within the optical fibre. Hence the temperature measurement can be used to accurately compensate any thermal fluctuations in the pressure measurements, leading to an improved long term stability. The Bragg-wavelength can be tailored to coincide with any part of the Fabry-Perot Interferometer (FPI) spectrum (e.g. define the FBG at a valley of the FPI spectrum). We use a modified femtosecond laser, point-by-point inscription method for precise and controlled placement of the fibre Bragg grating. Our technique can be readily adapted to commercial production methods for optical fibre sensors as it greatly mitigates the alignment problems associated with femtosecond laser inscription of gratings in optical fibres. The sensor presented in this paper is entirely fabricated with quartz glass, which makes it fully bio-compatible and can be used for biomedical application. The sensors achieved a high sensitivity of 1.3 nm kPa resulting in a resolution of ∼ 1mmHg and a temperature sensitivity of ∼ 10.7pm K. After the inscription, the sensors still demonstrated a stability of better than 0:1% in 30min. The small diameter of only 200μm allows biomedical in-vivo application in volume restricted areas (e.g. blood vessels or the brain) for simultaneous temperature and pressure measurements.

AB - A novel fibre Bragg grating (FBG) post-inscription technique using a femto second laser (FSL), used to modify an optical fibre pressure sensor (OFPS) based on an extrinsic Fabry Perot Interferometer (EFPI) is presented. The resultant sensor is an optical fibre pressure and temperature sensor (OFPTS), able to measure temperature and pressure simultaneously in precisely the same location within the optical fibre. Hence the temperature measurement can be used to accurately compensate any thermal fluctuations in the pressure measurements, leading to an improved long term stability. The Bragg-wavelength can be tailored to coincide with any part of the Fabry-Perot Interferometer (FPI) spectrum (e.g. define the FBG at a valley of the FPI spectrum). We use a modified femtosecond laser, point-by-point inscription method for precise and controlled placement of the fibre Bragg grating. Our technique can be readily adapted to commercial production methods for optical fibre sensors as it greatly mitigates the alignment problems associated with femtosecond laser inscription of gratings in optical fibres. The sensor presented in this paper is entirely fabricated with quartz glass, which makes it fully bio-compatible and can be used for biomedical application. The sensors achieved a high sensitivity of 1.3 nm kPa resulting in a resolution of ∼ 1mmHg and a temperature sensitivity of ∼ 10.7pm K. After the inscription, the sensors still demonstrated a stability of better than 0:1% in 30min. The small diameter of only 200μm allows biomedical in-vivo application in volume restricted areas (e.g. blood vessels or the brain) for simultaneous temperature and pressure measurements.

UR - http://www.scopus.com/inward/record.url?scp=84922388030&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84922388030&partnerID=8YFLogxK

U2 - 10.1109/ICSENS.2014.6984923

DO - 10.1109/ICSENS.2014.6984923

M3 - Conference contribution

VL - 2014-December

SP - 25

EP - 28

BT - Proceedings of IEEE Sensors

PB - Institute of Electrical and Electronics Engineers Inc.

ER -