Parametric investigation of the combined effect of whole depth and cutter tip radius on the bending strength of 20 involute gear teeth

C. Spitas, V. Spitas, A. Amani, M. Rajabalinejad

Research output: Contribution to journalArticle

14 Citations (Scopus)

Abstract

Standard 20 spur gears are typically generated with a whole depth of 2.2-2.25 times the module. At the nominal centre distance, this leaves a radial clearance, which is in itself redundant from a functional point of view. However, the intrinsic geometry of the cutting process always results in a non-involute root profile (the trochoid), which is even more pronounced in the case of using a rounded cutter tip in order to increase the strength of the cutting edge. Larger tip radii produce stronger tooth fillets, potentially increasing the bending strength, but reducing the involute part of the tooth. Thereby, they increase the risk of interference with mating gears. This paper performs a parametric investigation of the combined effect of the cutter radius and the dedendum on the clearance and the resulting tooth bending strength using analytical calculations, computerised generation and finite element simulations to determine the exact tooth geometry in search of stronger tooth forms. Non-dimensional modelling is used to obtain results applicable to entire gear families.

Original languageEnglish
Pages (from-to)361-371
Number of pages11
JournalActa Mechanica
Volume225
Issue number2
DOIs
Publication statusPublished - Feb 2014
Externally publishedYes

Fingerprint

Gear teeth
Bending strength
Gears
Spur gears
Geometry

ASJC Scopus subject areas

  • Mechanical Engineering
  • Computational Mechanics

Cite this

Parametric investigation of the combined effect of whole depth and cutter tip radius on the bending strength of 20 involute gear teeth. / Spitas, C.; Spitas, V.; Amani, A.; Rajabalinejad, M.

In: Acta Mechanica, Vol. 225, No. 2, 02.2014, p. 361-371.

Research output: Contribution to journalArticle

@article{ddda0c3703aa42e7b545b5daa83a2edf,
title = "Parametric investigation of the combined effect of whole depth and cutter tip radius on the bending strength of 20 involute gear teeth",
abstract = "Standard 20 spur gears are typically generated with a whole depth of 2.2-2.25 times the module. At the nominal centre distance, this leaves a radial clearance, which is in itself redundant from a functional point of view. However, the intrinsic geometry of the cutting process always results in a non-involute root profile (the trochoid), which is even more pronounced in the case of using a rounded cutter tip in order to increase the strength of the cutting edge. Larger tip radii produce stronger tooth fillets, potentially increasing the bending strength, but reducing the involute part of the tooth. Thereby, they increase the risk of interference with mating gears. This paper performs a parametric investigation of the combined effect of the cutter radius and the dedendum on the clearance and the resulting tooth bending strength using analytical calculations, computerised generation and finite element simulations to determine the exact tooth geometry in search of stronger tooth forms. Non-dimensional modelling is used to obtain results applicable to entire gear families.",
author = "C. Spitas and V. Spitas and A. Amani and M. Rajabalinejad",
year = "2014",
month = "2",
doi = "10.1007/s00707-013-0971-6",
language = "English",
volume = "225",
pages = "361--371",
journal = "Acta Mechanica",
issn = "0001-5970",
publisher = "Springer Wien",
number = "2",

}

TY - JOUR

T1 - Parametric investigation of the combined effect of whole depth and cutter tip radius on the bending strength of 20 involute gear teeth

AU - Spitas, C.

AU - Spitas, V.

AU - Amani, A.

AU - Rajabalinejad, M.

PY - 2014/2

Y1 - 2014/2

N2 - Standard 20 spur gears are typically generated with a whole depth of 2.2-2.25 times the module. At the nominal centre distance, this leaves a radial clearance, which is in itself redundant from a functional point of view. However, the intrinsic geometry of the cutting process always results in a non-involute root profile (the trochoid), which is even more pronounced in the case of using a rounded cutter tip in order to increase the strength of the cutting edge. Larger tip radii produce stronger tooth fillets, potentially increasing the bending strength, but reducing the involute part of the tooth. Thereby, they increase the risk of interference with mating gears. This paper performs a parametric investigation of the combined effect of the cutter radius and the dedendum on the clearance and the resulting tooth bending strength using analytical calculations, computerised generation and finite element simulations to determine the exact tooth geometry in search of stronger tooth forms. Non-dimensional modelling is used to obtain results applicable to entire gear families.

AB - Standard 20 spur gears are typically generated with a whole depth of 2.2-2.25 times the module. At the nominal centre distance, this leaves a radial clearance, which is in itself redundant from a functional point of view. However, the intrinsic geometry of the cutting process always results in a non-involute root profile (the trochoid), which is even more pronounced in the case of using a rounded cutter tip in order to increase the strength of the cutting edge. Larger tip radii produce stronger tooth fillets, potentially increasing the bending strength, but reducing the involute part of the tooth. Thereby, they increase the risk of interference with mating gears. This paper performs a parametric investigation of the combined effect of the cutter radius and the dedendum on the clearance and the resulting tooth bending strength using analytical calculations, computerised generation and finite element simulations to determine the exact tooth geometry in search of stronger tooth forms. Non-dimensional modelling is used to obtain results applicable to entire gear families.

UR - http://www.scopus.com/inward/record.url?scp=84894025488&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84894025488&partnerID=8YFLogxK

U2 - 10.1007/s00707-013-0971-6

DO - 10.1007/s00707-013-0971-6

M3 - Article

VL - 225

SP - 361

EP - 371

JO - Acta Mechanica

JF - Acta Mechanica

SN - 0001-5970

IS - 2

ER -